The new DT Swiss performance carbon wheels are the ultimate racing wheelsets. They rely on DT s huge experience in manufacturing every single component of a wheel, as well as employing state of the art technology in doing so. Tubeless ready 35mm deep carbon rimsSpokes: DT Aerolite straight pullHub type: 240Weight: 686g (front), 812g (rear)Recommended system rider weight: 130kgThe bespoke carbon rims are manufactured using a method developed by DT to ensure continuous carbon fibres are aligned with the forces passing through the wheel, increasing strength and stiffness in use without adding weight. 18 mm internal width is optimised for 25 c tyres and gives a larger contact patch and greater comfort over poor road surfaces without sacrificing too much aerodynamic performance. For those looking to use the latest tyre tech the PRC 1400's come tubeless ready but can also be used with standard clinchers.DT's Spline series 240 ratchet hubs have long been a byword for reliability and low weight, for 2018 the spline spoke mounting has been revised to allow improved bracing angles, improving lateral stiffness for no additional weight, a fast-engaging 36-tooth ratchet completes a premium package. DT's straight pull Aerolite and Aerospeed spokes offer a highly optimised mix of low weight, stiffness and aerodynamic performance with DT's renowned reliability.The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles. Includes tubeless rim tape and valves.
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!Lightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningAvailable in a huge range of axle and rotor fitments to suit almost any disc brake bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! If you want a front hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!Lightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningAvailable in a huge range of axle and rotor fitments to suit almost any disc brake bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! If you want a front hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!Lightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningAvailable in a huge range of axle and rotor fitments to suit almost any disc brake bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! If you want a front hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 350 hubs take all the features that make the 240 a true legend and forms them in a cheaper, better value format. If you want a great performing hub for a great price, the DT Swiss 350 should be on your list!Forged aluminium hub shell keeps weight to a minimum while maintaining strengthSuper durable steel axle and fully sealed bearingsAvailable in a huge range of options to fit almost any bikeThe 350 builds on the huge success of the 240 in a cheaper package while still offering the incredible performance and durability the 240 is known for. The hub shell is forged rather than machined to keep the cost down while still keeping the weight low and strength high, while a steel axle and fully sealed bearings ensure the 350 will keep spinning smoothly for years to come.
DT Swiss 350 hubs take all the features that make the 240 a true legend and forms them in a cheaper, better value format. If you want a great performing hub for a great price, the DT Swiss 350 should be on your list!Forged aluminium hub shell keeps weight to a minimum while maintaining strengthSuper durable steel axle and fully sealed bearingsAvailable in a huge range of options to fit almost any bikeThe 350 builds on the huge success of the 240 in a cheaper package while still offering the incredible performance and durability the 240 is known for. The hub shell is forged rather than machined to keep the cost down while still keeping the weight low and strength high, while a steel axle and fully sealed bearings ensure the 350 will keep spinning smoothly for years to come.
As part of the DT Swiss Cross Road range the C 1800 Spline wheels have been designed to perform on any surface. The C 1800's rims are a massive 22 mm wide internally, perfect for big volume 32c gravel and cyclocross tyres, giving even the fattest treads the support they need to be run at lower pressures, improving traction and comfort on rough, loose surface.Wide 22mm ID aluminium tubeless ready rim supports wider gravel tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 811g (front)The C 1800 Spline wheels are equipped with 23mm high, 22mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the C 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.
As part of the DT Swiss Cross Road range the C 1800 Spline wheels have been designed to perform on any surface. The C 1800's rims are a massive 22 mm wide internally, perfect for big volume 32c gravel and cyclocross tyres, giving even the fattest treads the support they need to be run at lower pressures, improving traction and comfort on rough, loose surface.Wide 22mm ID aluminium tubeless ready rim supports wider gravel tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 811g (front)The C 1800 Spline wheels are equipped with 23mm high, 22mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the C 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.
The E 1800 Spline is the perfect compromise between comfort and speed. Designed specifically for use with the new breed of wider 28-35mm tyres, the E 1800 combines a 20mm internal width, tubeless ready rim with lower tyres pressures to ensure you are never left wanting for comfort, with the added benefit of more grip in all conditions.Wide 20mm ID aluminium tubeless ready rim supports wider 28-35mm tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 766g (front)The E 1800 Spline wheels are equipped with a 23mm high, 20mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the E 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.
The E 1800 Spline is the perfect compromise between comfort and speed. Designed specifically for use with the new breed of wider 28-35mm tyres, the E 1800 combines a 20mm internal width, tubeless ready rim with lower tyres pressures to ensure you are never left wanting for comfort, with the added benefit of more grip in all conditions.Wide 20mm ID aluminium tubeless ready rim supports wider 28-35mm tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 766g (front)The E 1800 Spline wheels are equipped with a 23mm high, 20mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the E 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.
As part of the DT Swiss gravel range, the G 1800 Spline wheels have been designed to perform on any surface. The rims are a massive 24 mm wide internally, perfect for big volume gravel tyres, giving even the fattest treads the support they need to be run at lower pressures, improving traction and comfort on rough, loose surface.Wide 24mm ID aluminium tubeless ready rim supports wider gravel tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 835g (27.5 inch - front)The G 1800 Spline wheels are equipped with 25mm high, 24mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the G 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.
As part of the DT Swiss gravel range, the G 1800 Spline wheels have been designed to perform on any surface. The rims are a massive 24 mm wide internally, perfect for big volume gravel tyres, giving even the fattest treads the support they need to be run at lower pressures, improving traction and comfort on rough, loose surface.Wide 24mm ID aluminium tubeless ready rim supports wider gravel tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 835g (27.5 inch - front)The G 1800 Spline wheels are equipped with 25mm high, 24mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the G 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.