The Wolf Tooth Direct Mount Chainring for Cannondale Hollowgram CX and Road Offset is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Cannondale Hollowgram CX and Road Offset cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:This direct mount chainring will replace your existing spider/chainring on Road and CX Cannondale Hollowgram SI & SISL cranks.,These are NOT compatible with Cannondale mountain bike cranksets because the chainline will be too far off from optimal.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline 44mm.
Wolf Tooth Direct Mount Mountain Bike Chain RingThis high-quality chainring is perfect for fast and rowdy MTB use as it delivers powerful torque performance as you blast across the mountains. It features a rock-solid aluminium construction which makes it exceptional at handling the increased pressure which comes with all-day epics and off-road adventures. Developed or use with your SRAM crankset which has SDM fitment, this fantastic component replaces your existing upper spider and chainring with one lightweight component.Features: Material: 7075-T6 Aluminium Use: Mountain Bike (MTB) and Road Mount: Direct Mount Compatibility: SRAM cranksets with SDM fitment Weight: 65g (32T); 90g (38T) and 111g (42T)Compatibility Information:These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.Chain Compatibility:- All 9, 10, 11 speed chains as well as 12 speed SRAM Eagle, Campagnolo, KMC and SRAM Flat Top AXS chains - They do not work with Shimano 12 speed Hyperglide+ chains.- Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings.- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Direct Mount Roadlink Derailleur HangerEnabling you to run larger range cassettes on your road or gravel bike, this direct mount (DM) version of Wolf Tooth's RoadLink Derailleur Hanger extension works with a wide range of Shimano 11 speed rear mechanisms. It’s the ideal adaptor for changing the gearing on your bike to a 1x11 speed drivetrain setup.This gear hanger extension fits Shimano’s GRX 810 (RX810), R7000 105, R8000 and RX800 Ultegra and R9100 Dura-Ace rear derailleurs. Since it was first introduced, this award-winning model has given riders the ability to easily increase the range of their Shimano road bike drivetrains, while also maintaining near-factory levels of chain wrap and shifting operation.Like the mountain-focused GoatLink, the RoadLink DM replaces Shimano’s stock direct mount link allowing you to relocate the derailleur to provide clearance for larger-than-stock range cassettes while maintaining chain wrap and improving shifting. The result - larger gear ranges that riders want and expect for their road, commuter, gravel and touring bicycles.Features:Material: CNC machined from 6061-T6 Aluminium with stainless steel boltMount: Direct mountCompatibility: Shimano GRX 810 (RX810), 105 R7000, Ultegra R8000 and RX800 and Dura-Ace R9100 rear derailleursFits standard derailleur hangers onlyOptimised for use with 11-36T, 11-40T, and 11-42T 11-Speed cassettesOptimised for use with GRX ultra-wide range drivetrains when using the GRX 810 (RX810) rear derailleurImproves performance with 10-42T 11-Speed cassettes, but not to factory levelsDoes not change the derailleurs total chain wrap capacityMade in the USAManufacturer’s Part Number: WTROADLINK-DMWeight: 20gPlease Note: Direct mount derailleur hangers are not supported. These are not common and the stock B-Link that the RoadLink DM replaces will not be present on bikes with a direct mount derailleur hanger.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Any Race Face Cinch™ System Crankset.,Compatible With Shimano 12-speed Hyperglide+ Chains.
The Wolf Tooth Elliptical Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch(TM) system crankset (including Next SL, Sixc, Turbine, Aeffect),Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!),Chainline 49mm (standard), 52mm (Boost).
Key Features:9, 10, 11, & 12spd eagle - these chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed eagle and 12 speed kmc chain. They do not work with shimano 12 speed hyperglide+ chain or sram 12 speed flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
Key Features:Built to prevent chain drop on tough and muddy routes,Easily adjustable and simple chain removal,Machined from 6061-t6 aluminiumCompatibility:,Designed to fit on any bike with a high direct mount,Primed for 48mm and 54mm chain lines and 28t - 36t round or oval chainrings,Required a minimum distance of 10mm between crank and centre of the ring,Optimised for use with both elliptical and round chainrings.,For 1x use only.
Wolf Tooth Race Face Cinch Direct Mount Chain RingDeveloped for unrivalled innovation, reliability and durability, this direct mount chainring features a patented Drop-Stop wide-narrow tooth profile. This means that you'll benefit from its excellent chain stability on your single speed setups, while it also dislodges mud, dirt and excess debris more efficiently. The result is a more reliable and cleaner chainring setup. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention and mud clearance. Compatibility:Any Race Face Cinch system crankset.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding abilityFor 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle).Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).Features: Material: 7075-T6 Aluminium Speed: Single speed Mount: Direct mount Number of Chainrings in Box: One Crank Compatibility: Race Face CinchChainline: 52mm BoostOffset: 3mmMade in the USA Part Numbers: 32T: WTRFC32BST; 34T: WTRFC34BST; 36T: WTRFC36BST Weight: 32T: 58g; 34T: 69g; 36T: 75gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Race Face Cinch Direct Mount Chain RingDeveloped for unrivalled innovation, reliability and durability, this direct mount chainring features a patented Drop-Stop wide-narrow tooth profile. This means that you'll benefit from its excellent chain stability on your single speed setups, while it also dislodges mud, dirt and excess debris more efficiently. The result is a more reliable and cleaner chainring setup. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention and mud clearance. Compatibility:Any Race Face Cinch system crankset.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding abilityFor 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle).Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).Features: Material: 7075-T6 Aluminium Speed: Single speed Mount: Direct mount Number of Chainrings in Box: One Crank Compatibility: Race Face CinchChainline: 52mm BoostOffset: 3mmMade in the USA Part Numbers: 32T: WTRFC32BST; 34T: WTRFC34BST; 36T: WTRFC36BST Weight: 32T: 58g; 34T: 69g; 36T: 75gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Replacement Bolts for SRAM Direct Mount Chainring.
Wolf Tooth SRAM Direct Mount Boost MTB Chain RingThe ideal chainring upgrade for the most aggressive mountain bike riders, Wolftooth has constructed this tough and efficient drivetrain component from 7075-T6 aluminium. Precisely machined with a patented narrow-wide tooth design, this boost-bike specific model is perfect for use with 1x12-speed gears and offers you excellent chain retention over the roughest trails.Wolftooth Drop-Stop technologyWolf Tooth has also equipped this version with its game-changing Drop-Stop technology, which keeps your chain securely in place and dislodges mud, dirt and excess water more efficiently. Features: Material: 7075-T6 Aluminium Mount: Direct mount Chainline: 52mm Offset: 3mm Made in the USA Designed for use with bikes with 148mm rear hub spacing Tooth Profile: Narrow-Wide, Woolftooth drop Stop A (optimised for mountain bikes) Part Numbers: Weight: 28T: 59g; 30T: 65g; 32T: 70gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth SRAM Direct Mount Boost MTB Chain RingThe ideal chainring upgrade for the most aggressive mountain bike riders, Wolftooth has constructed this tough and efficient drivetrain component from 7075-T6 aluminium. Precisely machined with a patented narrow-wide tooth design, this boost-bike specific model is perfect for use with 1x12-speed gears and offers you excellent chain retention over the roughest trails.Wolftooth Drop-Stop technologyWolf Tooth has also equipped this version with its game-changing Drop-Stop technology, which keeps your chain securely in place and dislodges mud, dirt and excess water more efficiently. Features: Material: 7075-T6 Aluminium Mount: Direct mount Chainline: 52mm Offset: 3mm Made in the USA Designed for use with bikes with 148mm rear hub spacing Tooth Profile: Narrow-Wide, Woolftooth drop Stop A (optimised for mountain bikes) Part Numbers: Weight: 28T: 59g; 30T: 65g; 32T: 70gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.