The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
LifeLine Shimano BH59 Universal Olive Insert/NutThis four pack includes brass olives, brass nuts and inserts that are specifically designed to fit Shimano BH59 hydraulic brake hose. Excellent quality replacement parts.Features: Brass Olive, Brass Nut & Insert 4 Pack BH59 CompatibleBuy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Shimano BH90 Universal Olive Insert/NutThis four pack includes olives, inserts and nuts that are specifically designed to fit Shimano BH90 hydraulic brake hose. Excellent quality replacement parts.Features: Olive, Insert & Nut 4 Pack BH90 CompatibleBuy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Comp Press Fit Semi Integrated HeadsetEnjoy a high-quality performance from this Press Fit Semi Integrated Headset from Ritchey. Featuring a durable and hard-wearing Chromoly (CrMo) top bearing cover and an alloy top cap, for long-lasting performance you can count on. S.H.I.S. OverviewThe Standardized Headset Identification System (S.H.I.S.) creates a common language for describing modern bicycle headsets. The system provides comprehensive and scalable headset fitment information in a standardized format; making it easy to communicate headset requirements based on frame and fork interfaces.The system addresses the critical interface dimensions required to fit a fork to a frame, as well as bearing location/cup type. To determine fit, four dimensions are needed: (1) stem-clamp diameter of fork, (2) crown-race seat diameter of fork, (3) head-tube top inside diameter, and (4) head-tube bottom inside diameter. Bearing location and cup-type are identified as (a) external cup (EC), (b) semi-integrated or ZeroStack (ZS), or (c) integrated (IS).Bearing Location/Cup Types:EC (External Cup)Bearings contained within cups that are located outside of the frame.ZS (ZeroStack)Bearings contained within pressed-in cups where the cup and bearings rest inside the frame.IS (Integrated)Bearings that fit directly into a bonded or machined interface that is integrated into the frame.Features:A semi integrated press fit headsetComp Chromoly (CrMo) top bearing coverSemi cartridge bearingsSupplied with Ritchey high quality alloy star nut and top capBlack FinishSteerer Size: 1-1/8", 1-1/8"-1-1.5"Fits: 1 1/8" steerer tubeStack Height: 11.3mmUpper S.H.I.S: ZS44/28.6Lower S.H.I.S: ZS44/30Upper Headtube: 50/44mmLower Headtube: 50/44mmWeight: 109g (approx.)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Comp Press Fit Semi Integrated HeadsetEnjoy a high-quality performance from this Press Fit Semi Integrated Headset from Ritchey. Featuring a durable and hard-wearing Chromoly (CrMo) top bearing cover and an alloy top cap, for long-lasting performance you can count on. S.H.I.S. OverviewThe Standardized Headset Identification System (S.H.I.S.) creates a common language for describing modern bicycle headsets. The system provides comprehensive and scalable headset fitment information in a standardized format; making it easy to communicate headset requirements based on frame and fork interfaces.The system addresses the critical interface dimensions required to fit a fork to a frame, as well as bearing location/cup type. To determine fit, four dimensions are needed: (1) stem-clamp diameter of fork, (2) crown-race seat diameter of fork, (3) head-tube top inside diameter, and (4) head-tube bottom inside diameter. Bearing location and cup-type are identified as (a) external cup (EC), (b) semi-integrated or ZeroStack (ZS), or (c) integrated (IS).Bearing Location/Cup Types:EC (External Cup)Bearings contained within cups that are located outside of the frame.ZS (ZeroStack)Bearings contained within pressed-in cups where the cup and bearings rest inside the frame.IS (Integrated)Bearings that fit directly into a bonded or machined interface that is integrated into the frame.Features:A semi integrated press fit headsetComp Chromoly (CrMo) top bearing coverSemi cartridge bearingsSupplied with Ritchey high quality alloy star nut and top capBlack FinishSteerer Size: 1-1/8", 1-1/8"-1-1.5"Fits: 1 1/8" steerer tubeStack Height: 11.3mmUpper S.H.I.S: ZS44/28.6Lower S.H.I.S: ZS44/30Upper Headtube: 50/44mmLower Headtube: 50/44mmWeight: 109g (approx.)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SeaSucker Monkey Bars 48in Universal RackThe SeaSucker Monkey Bars are the ultimate bike rack for any vehicle. Weighing only 20 lbs and compatible with virtually any car design, this bike rack allows you to easily transport your bike to various destinations, from a snowy mountain top to a sandy beach. The Monkey Bars fit just about any type of roof (narrow or wide) thanks to 4 large vacuum mounts at the front and 2 smaller ones in the rear. The durable powder-coated aluminium crossbars will always ensure a safe and secure attachment.Please Note: the pictured bike mount is not included with the Monkey bars and is sold separately.This one-size-fits-all roof rack system just got a little slicker. SeaSucker dressed it in black so it's ready for a night on the town or a stealth mission, and the bars are now screw-together. That means you can unscrew them for easier storage and transport.The Monkey Bars are round black powder-coated aluminium cross bars. This durable bike rack allows you to easily attach accessories for activities such as kayaking, skiing, surfing and paddle boarding, biking, or hauling cargo. Powered by 6" SeaSucker vacuum mounts (4 up front and 2 in the rear), the Monkey Bars fit on just about any car with a roof. Have a wide or narrow roof? No worries, the vacuum mounts can be moved to any position on the bar to ensure a perfect fit for any vehicle.Features: Bar Diameter: 1.3"/33mm Weight: approx 9kgBuy SeaSucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Universal Olive and Insert BH59-BH63The Universal Olive and Insert from Shimano is the perfect lightweight replacement when changing the length of the hose on your road bike or mountain bike's hydraulic disc brakes. This package includes 1x brass olive and 1x brass hose insert.Features:Material: BrassGenuine Shimano replacementCompatible with: Shimano BR-RS785, BR-RS505, BR-R785, Alivio BR-M4050, Acera BR-M3050, BR-M355 Manufacturer Part Number: Y8H298040A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The BBT-19.2 is a heavy duty shop quality tool for installing and removing Shimano SRAM Truvativ Race Face FSA and Campagnolo 16-notch external bottom bracket cups with an outside diameter of 44 mmUpdated to be more accurate and longer lasting the BBT-19.2 can be turned with a 3/8 inch drive torque wrench or ratchet a 1 inch wrench or a Park Tool FRW-1 Freewheel Remover Wrench
Reliable, highly rigid E-thru axle for 142 x 12 mm Shimano hubsHollow axle design,Simple quick release opening mechanism designed to be integrated in to the frame for easy wheel installation and removal,Designed for use with 142 x 12 mm frame dropouts,Average weight 97 grams.
FOX Mounting Hardware Roller Full Complement 30mm Wide 8mm DiameterPart Number: 812-06-096-KIT