CeramicSpeed OSPW System Coated Shimano 10/11s 9000/6800 finished in Silver, will add a competitive edge to your riding with smoother gear changes, watts saved and envy to all who see your bike. Developed and designed entirely by CeramicSpeed, the Oversized Pulley Wheel (OSPW) System for Shimano 9000/6700 provides the ultimate optimization of your bicycle's drivetrain. This OSPW System features a set of 17-tooth aluminium Pulley Wheels, available in red and black, housed in a specially designed polyamide (PA) and carbon cage. The upper and lower 17-tooth oversized aluminium pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. The Oversized Pulley Wheel (OSPW) System is the product of choice by many of the world's leading cycling teams and triathletes. This specific system is compatible with Ultegra 6700/6770/6800/6870 mechanical and Di2 rear derailleurs and Dura-Ace 7900/7970/9000/9070 mechanical and Di2 rear derailleurs. The cage is made from carbon fibre and reinforced PA while the 17-tooth pulley wheels are made from aluminium and mounted with high-quality CeramicSpeed coated bearings. The revolutionary OSPW System is mounted with CeramicSpeed coated bearings, which means it has undergone a special coating treatment to provide even more protection and lower friction. A very thin protective coating is applied to the bearing races, which further increases the resistance to corrosion or damage from foreign objects. The OSPW has been tested and confirmed to be the world’s fastest pulley wheel system, therefore enhancing your performance with free speed, which gives you a more efficient drivetrain. Since its introduction in 2015, the CeramicSpeed Oversized Pulley Wheel System has been through 13 unique derailleur compatibility developments. No other pulley system has the depth of use and trust as the CeramicSpeed OSPW, which counts both Men’s and Women’s Triathlon World Champions, World Tour professional road teams, XCO professional MTB Teams, and elite athletes worldwide as its users. Maintenance It’s important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil to the outside of the bearing seal, so that oil can penetrate the bearing. Do this when you lubricate your chain, or if you have washed your bike or have been riding in wet or muddy conditions. This revolutionary OSPW System is developed, produced and assembled by hand in Denmark. This plug-and-play product is the result of an in-depth development process and has been designed for optimal performance. Created to answer the need for less friction (as much as 60%), increased speed and a more efficient drivetrain. This OSPW System helps you ride any distance comfortably. The optimisation of your drivetrain with the new CeramicSpeed OSPW System delivers access to industry-leading efficiency. The use of high-quality materials means this system will outlast other commonly used pulley wheels on the market.
Battery anxiety? Not with a Turbo SL. Our discreet and compact SL Range-Extender Battery provides up to 40 additional miles (64km) of mountain-flattening power. More range, more riding.Key Features:160Wh capacity delivers up to one additional hour of riding.,Only compatible with Specialized Turbo SL Bikes.,Includes a 3 LED charge-level indicator.,.Please Note: Extender cable is required and sold separately.
Are you looking for your childs first BMX to learn the basics on ramps, the race track or the street. The best possible starting advantage you could gift to them is to make it a tall order Ramp Bike. The Ramp 14" bike has been designed as the perfect entry into BMX for kids, aimed at 3-5 year old's. Tall Order have utilised the best materials they could whilst keeping the bike at an affordable price. Bike safety kit and front brake inluded. This stylish looking bike features a fully sealed rear cassette rarely seen on bikes in this price range. ###section### Product Specs FRAME MATERIAL: 100% Hi-Ten Steel WHEEL SIZE: 14" TOP TUBE LENGTH: 14.5" CHAIN STAY LENGTH: 10.25" HEADTUBE ANGLE: 74° SEAT TUBE ANGLE: 71° FORKS: Ramp 14”, Hi-Ten Steel with tapered fork legs BARS: 6” rise, Hi-Ten Steel STEM: Alloy Top Load, 40mm reach HEADSET: Unsealed aheadset BRAKE MOUNTS: Welded BRAKES: U brake with linear brake cable FRONT HUB: Steel Looseball front hub with 10mm axle FRONT RIM: 14” Alloy 28h Single wall REAR HUB: Loose ball cassette hub, 10mm axle with 14mm adapter REAR RIM: 14” Alloy 28h Single wall TYRES: 14” Alloy 28h Single wall SPROCKET: 25t, Steel CRANKS: Steel 1pc, 114mm BB: USA unsealed PEDALS: Plastic unsealed SEAT: 1pc combo with Steel post GEARING: 25/9 WEIGHT: 8.62kg ###section### Product Highlights Smaller 14" Wheels - The Perfect fit for for 3-5 years olds (3ft - 3ft 8 / 91cm - 112cm) Specifically designed for the smaller rider, just starting out in BMX Strong Hi-ten steel construction Traditional BMX geometry Bike safety kit and front brake included ###shogun-image-section###
The Contender II features a longer 5” headtube meaning no more headset spacers to mess with, and a higher bottom bracket height for better clearance on grinds. The Contender II frame was designed to put a beating on, and withstand the toughest riding month after month, day in and day out. Double butted toptube and downtube, plus gussets on both, equals one formidable frame. Not only that, but oval downtube for dent resistance and chainstay wishbone design means this frame is strong and durable. Integrated chain tensioners allow you to centre your wheel with ease, and the casted knurling on the inner dropout keep plastic hub guards in their place. Integrated seat clamp, removable brake mounts and a championship belt inspired seatstay bridge are just a few more features not to overlook on Dan Coller’s signature Contender II frame. ###section### Product Specs MATERIAL: 100% Seamless Sanko 4130 Chromoly Tubing HEAD TUBE ANGLE: 75° SEAT TUBE ANGLE: TBC CHAIN STAY LENGTH: 13.25" BB HEIGHT: 11.8" WHEEL SIZE: 20" STANDOVER HEIGHT: 9" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: 5lb 3oz (20.5") ###section### Product Highlights Neutral Geometry for responsiveness and stability Best suited to Street and Park riding High-quality Chromoly construction Seamless Japanese Sanko Tubing Strong and durable investment cast construction
Everything from bearings to the cage on the CeramicSpeed OSPW is made from the highest quality materials. The oversized aluminium pulley wheels are fitted with standard CeramicSpeed Bearings, which reduce friction for optimised power transfer. The overall power savings of the OSPW System for Shimano reach 30%-60% or more in some cases. The CeramicSpeed oversized pulley wheel system has a lifetime that lasts 3-5 times longer than the commonly used standard pulleys on the market. This Shimano Dura-Ace 9100/9150 rear derailleur compatible version features an optimal 13/19-tooth combination specially developed to fit the design of this road bike rear derailleur. This system has been proven to be the fastest pulley system in the world, providing energy savings starting from 2.4 watts over standard Shimano systems. The OSPW system is an industry-leading product, chosen by many of the world's leading cycling teams and professional triathletes. IMPORTANT: When travelling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit in most bike travel bags and could be damaged if left on. The revolutionary OSPW System is developed, produced and assembled by hand in Denmark. The product is the result of an in-depth development process and has been designed for optimal performance. Like all other products delivered by CeramicSpeed, OSPW System has also undergone a thorough test program. We are proud to say that professional triathletes such as Tim Don and Tyler Butterfield have great feedback for the system and, along with Pro Continental teams, they have made it a permanent part of their equipment. Regarding the maintenance of your OSPW System, it is important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil by using the lubrication points on the back cage plate, so that oil can penetrate the bearing. Do this when you lubricate your chain, if you have washed your bike or after riding in wet or muddy conditions.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring 5 bolt spider cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring 5 bolt spider cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring 5 bolt spider cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
The V2 315 frame is a longer frame now with a 8.8″ stand over and 13.75” back end which allows for a more stable ride. The frame features an investment cast seat stay bridge and both top and down tube gussets for added strength. This frame is made from Japanese Sanko tubing and is designed to be light without compromising on strength. ###section### Product Specs MATERIAL: 4130 Chromoly HEAD TUBE ANGLE: 75° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.75" BB HEIGHT: 11.6" WHEEL SIZE: 20" STANDOVER HEIGHT: 8.8" DROPOUT SIZE: 14mm HEADSET TYPE: Integrated BB TYPE: Mid BRAKE MOUNTS: Removable GYRO TABS: Removable WEIGHT: TBC ###section### Product Highlights Longer Backend and Mellow Headtube Angle for stability Best suited for Trails and riding Fast High-quality Chromoly construction Strong and durable investment cast seat stay bridge Built In Chain Tensioners ###shogun-image-section###
The Lacey frame by Federal is pro rider Dan Lacey's signature frame. It's built with a super long 13.75" rear end, adding all the stability and control you'll need when hitting the streets hard. Also, the IC dropouts will help you prevent catching on your grinds. The Lacey frame features an engraved headtube logo, 100% re-designed dropouts, and a revised stay bridge with an inverted logo badge. ###section### Product Specs MATERIAL: 100% 4130 CrMo HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.75" BB HEIGHT: TBC WHEEL SIZE: 20" STANDOVER HEIGHT: 9" DROPOUT SIZE: 14mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Removable (Sold separately) GYRO TABS: Removable (Sold separately) WEIGHT: TBC ###section### Product Highlights Neutral Geometry for responsiveness and stability Best suited to Street and Park riding High-quality Chromoly construction Removable brake hardware (Brake hardware not included) Strong and durable investment cast dropouts ###shogun-image-section###
Anthony Perrin's Federal Perrin ICS2 frame with the ICS2 wishbone and smaller, more refined IC dropouts and a slightly taller head tube. ###section### Product Specs MATERIAL: 100% 4130 CrMo HEAD TUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 12.9" BB HEIGHT: 11.6" WHEEL SIZE: 20" STANDOVER HEIGHT: 8.9" DROPOUT SIZE: 14mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Removable (Sold separately) GYRO TABS: Removable (Sold separately) WEIGHT: TBC ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Best suited to Street and Park riding High-quality Chromoly construction Removable brake hardware (Brake hardware not included) Strong and durable investment cast dropouts ###shogun-image-section###
The Australian BMX pro rider, Boyd Hilder, has been working closely together with the guys at Federal on this one in order to ensure the ultimate Boyd Hilder bike. Inspired by Boyd's own wild riding style, he wanted something stable and fast, suitable for both park and street riding. He wanted an oval down tube, a taller head tube, and a longer top tube - and so he got. ###section### Product Specs MATERIAL: 100% 4130 CrMo HEAD TUBE ANGLE: 75.2° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 13.4" BB HEIGHT: TBC WHEEL SIZE: 20" STANDOVER HEIGHT: 9" DROPOUT SIZE: 14mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Removable (Sold separately) GYRO TABS: Removable (Sold separately) WEIGHT: TBC ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Great all round frame for all types of riding High-quality Chromoly construction Strong and durable investment cast dropouts Removable brake hardware (Brake hardware not included) ###shogun-image-section###