Leatt Replacement Visor-DBX 5.0 HelmetBe fully prepared to chop and change immediately thanks to the Replacement Visor – DBX 5.0 Helmet. Offering the perfect plan B should your original become worn or damaged, this handy accessory lets you put a fresh twist on your offroad lid.Features:Genuine replacement visor for your DBX 3.0 HelmetBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt Replacement Visor-DBX 4.0 HelmetCommitted to providing the very best bike protection possible, Leatt’s DBX 4.0 Helmet Replacement Visor is the perfect accessory should your original become damaged or worn.Fitting effortlessly to your Leatt DBX 4.0 Helmet, this replacement visor works to shield your eyes from the watchful gaze of the sun, as well as roost and loam, making it easier to shred aggressively during your session.Features:Visor for the DBX 4.0 HelmetGenuine replacement partBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.0 Clipless ShoesThe DBX 5.0 Clipless Shoes from Leatt let you clip in with ease and go tear up your favourite mountain trails with ruthless efficiency. They're rugged too, taking on the hard-knocks of riding and always coming back for more. From a challenging Enduro race, ripping a downhill course or the thrills of a fast flow trail, the DBX 5.0 Clipless Shoes keep you solidly and securely planted on the pedals. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure that even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 5.0s are at the cutting edge of shoe construction too. A 3D knit upper hugs the foot for superb comfort. And it's water-resistant and breathable too, keeping your foot protected from muddy splashes as well as sweat-free. PU reinforcement, including super-tough toe and heel protection, shrugs off the inevitable knocks, scrapes and bumps that mountain biking brings - these shoes are built tough. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit as you pedal hard out of fast berms and flash along sweet singletrack. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Concealed speed lace system, Cross-tension straps for pedal efficiency and weather protection3D-Knit upper with water resistance and breathable shellStrategically placed PU reinforcements - Stealth heel and toe capsTongue: Low-profile, padded and weather-resistantBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.0 Clipless ShoesThe DBX 5.0 Clipless Shoes from Leatt let you clip in with ease and go tear up your favourite mountain trails with ruthless efficiency. They're rugged too, taking on the hard-knocks of riding and always coming back for more. From a challenging Enduro race, ripping a downhill course or the thrills of a fast flow trail, the DBX 5.0 Clipless Shoes keep you solidly and securely planted on the pedals. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure that even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 5.0s are at the cutting edge of shoe construction too. A 3D knit upper hugs the foot for superb comfort. And it's water-resistant and breathable too, keeping your foot protected from muddy splashes as well as sweat-free. PU reinforcement, including super-tough toe and heel protection, shrugs off the inevitable knocks, scrapes and bumps that mountain biking brings - these shoes are built tough. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit as you pedal hard out of fast berms and flash along sweet singletrack. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Concealed speed lace system, Cross-tension straps for pedal efficiency and weather protection3D-Knit upper with water resistance and breathable shellStrategically placed PU reinforcements - Stealth heel and toe capsTongue: Low-profile, padded and weather-resistantBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.0 Clipless ShoesThe DBX 5.0 Clipless Shoes from Leatt let you clip in with ease and go tear up your favourite mountain trails with ruthless efficiency. They're rugged too, taking on the hard-knocks of riding and always coming back for more. From a challenging Enduro race, ripping a downhill course or the thrills of a fast flow trail, the DBX 5.0 Clipless Shoes keep you solidly and securely planted on the pedals. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure that even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 5.0s are at the cutting edge of shoe construction too. A 3D knit upper hugs the foot for superb comfort. And it's water-resistant and breathable too, keeping your foot protected from muddy splashes as well as sweat-free. PU reinforcement, including super-tough toe and heel protection, shrugs off the inevitable knocks, scrapes and bumps that mountain biking brings - these shoes are built tough. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit as you pedal hard out of fast berms and flash along sweet singletrack. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Concealed speed lace system, Cross-tension straps for pedal efficiency and weather protection3D-Knit upper with water resistance and breathable shellStrategically placed PU reinforcements - Stealth heel and toe capsTongue: Low-profile, padded and weather-resistantBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.0 Clipless ShoesThe DBX 5.0 Clipless Shoes from Leatt let you clip in with ease and go tear up your favourite mountain trails with ruthless efficiency. They're rugged too, taking on the hard-knocks of riding and always coming back for more. From a challenging Enduro race, ripping a downhill course or the thrills of a fast flow trail, the DBX 5.0 Clipless Shoes keep you solidly and securely planted on the pedals. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure that even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 5.0s are at the cutting edge of shoe construction too. A 3D knit upper hugs the foot for superb comfort. And it's water-resistant and breathable too, keeping your foot protected from muddy splashes as well as sweat-free. PU reinforcement, including super-tough toe and heel protection, shrugs off the inevitable knocks, scrapes and bumps that mountain biking brings - these shoes are built tough. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit as you pedal hard out of fast berms and flash along sweet singletrack. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Concealed speed lace system, Cross-tension straps for pedal efficiency and weather protection3D-Knit upper with water resistance and breathable shellStrategically placed PU reinforcements - Stealth heel and toe capsTongue: Low-profile, padded and weather-resistantBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.0 Clipless ShoesThe DBX 5.0 Clipless Shoes from Leatt let you clip in with ease and go tear up your favourite mountain trails with ruthless efficiency. They're rugged too, taking on the hard-knocks of riding and always coming back for more. From a challenging Enduro race, ripping a downhill course or the thrills of a fast flow trail, the DBX 5.0 Clipless Shoes keep you solidly and securely planted on the pedals. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure that even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 5.0s are at the cutting edge of shoe construction too. A 3D knit upper hugs the foot for superb comfort. And it's water-resistant and breathable too, keeping your foot protected from muddy splashes as well as sweat-free. PU reinforcement, including super-tough toe and heel protection, shrugs off the inevitable knocks, scrapes and bumps that mountain biking brings - these shoes are built tough. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit as you pedal hard out of fast berms and flash along sweet singletrack. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Concealed speed lace system, Cross-tension straps for pedal efficiency and weather protection3D-Knit upper with water resistance and breathable shellStrategically placed PU reinforcements - Stealth heel and toe capsTongue: Low-profile, padded and weather-resistantBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.0 Clipless ShoesThe DBX 5.0 Clipless Shoes from Leatt let you clip in with ease and go tear up your favourite mountain trails with ruthless efficiency. They're rugged too, taking on the hard-knocks of riding and always coming back for more. From a challenging Enduro race, ripping a downhill course or the thrills of a fast flow trail, the DBX 5.0 Clipless Shoes keep you solidly and securely planted on the pedals. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure that even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 5.0s are at the cutting edge of shoe construction too. A 3D knit upper hugs the foot for superb comfort. And it's water-resistant and breathable too, keeping your foot protected from muddy splashes as well as sweat-free. PU reinforcement, including super-tough toe and heel protection, shrugs off the inevitable knocks, scrapes and bumps that mountain biking brings - these shoes are built tough. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit as you pedal hard out of fast berms and flash along sweet singletrack. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Concealed speed lace system, Cross-tension straps for pedal efficiency and weather protection3D-Knit upper with water resistance and breathable shellStrategically placed PU reinforcements - Stealth heel and toe capsTongue: Low-profile, padded and weather-resistantBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.0 Clipless ShoesThe DBX 5.0 Clipless Shoes from Leatt let you clip in with ease and go tear up your favourite mountain trails with ruthless efficiency. They're rugged too, taking on the hard-knocks of riding and always coming back for more. From a challenging Enduro race, ripping a downhill course or the thrills of a fast flow trail, the DBX 5.0 Clipless Shoes keep you solidly and securely planted on the pedals. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure that even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 5.0s are at the cutting edge of shoe construction too. A 3D knit upper hugs the foot for superb comfort. And it's water-resistant and breathable too, keeping your foot protected from muddy splashes as well as sweat-free. PU reinforcement, including super-tough toe and heel protection, shrugs off the inevitable knocks, scrapes and bumps that mountain biking brings - these shoes are built tough. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit as you pedal hard out of fast berms and flash along sweet singletrack. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Concealed speed lace system, Cross-tension straps for pedal efficiency and weather protection3D-Knit upper with water resistance and breathable shellStrategically placed PU reinforcements - Stealth heel and toe capsTongue: Low-profile, padded and weather-resistantBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.0 Clipless ShoesThe DBX 5.0 Clipless Shoes from Leatt let you clip in with ease and go tear up your favourite mountain trails with ruthless efficiency. They're rugged too, taking on the hard-knocks of riding and always coming back for more. From a challenging Enduro race, ripping a downhill course or the thrills of a fast flow trail, the DBX 5.0 Clipless Shoes keep you solidly and securely planted on the pedals. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure that even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 5.0s are at the cutting edge of shoe construction too. A 3D knit upper hugs the foot for superb comfort. And it's water-resistant and breathable too, keeping your foot protected from muddy splashes as well as sweat-free. PU reinforcement, including super-tough toe and heel protection, shrugs off the inevitable knocks, scrapes and bumps that mountain biking brings - these shoes are built tough. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit as you pedal hard out of fast berms and flash along sweet singletrack. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Concealed speed lace system, Cross-tension straps for pedal efficiency and weather protection3D-Knit upper with water resistance and breathable shellStrategically placed PU reinforcements - Stealth heel and toe capsTongue: Low-profile, padded and weather-resistantBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 4.0 Clipless ShoesClip-in and go tear up your favourite mountain bike trails with the superb comfort and pedalling efficiency of the Leatt DBX 4.0 Clipless Shoes. The rugged build is also tuned to take on the rigours of all your MTB riding adventures.For gravity riders who prefer the feel and security of clipping into the pedals, the DBX 4.0 Clipless Shoes are for you. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 4.0s are also built tough. Made from synthetic leather, they can take the daily use and abuse of mountain biking and still come out smiling. The water-resistant upper and weatherproof tongue also let you take on wet and muddy trails with ease. It's easy to clean too - bonus. With reinforced toe, heel and Achilles you'll avoid bumps and bruises from debris kicked up off the trail while the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. What more could you want when ripping MTB trails?Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Cross-tension straps for pedal efficiency and weather protectionUpper: Synthetic Leather - Water-resistant and easy to cleanTongue: Low-profile, padded and weather-resistantProtection: Inner ankle mid-height protectionReinforcements in toe, heel and AchillesBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 4.0 Clipless ShoesClip-in and go tear up your favourite mountain bike trails with the superb comfort and pedalling efficiency of the Leatt DBX 4.0 Clipless Shoes. The rugged build is also tuned to take on the rigours of all your MTB riding adventures.For gravity riders who prefer the feel and security of clipping into the pedals, the DBX 4.0 Clipless Shoes are for you. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 4.0s are also built tough. Made from synthetic leather, they can take the daily use and abuse of mountain biking and still come out smiling. The water-resistant upper and weatherproof tongue also let you take on wet and muddy trails with ease. It's easy to clean too - bonus. With reinforced toe, heel and Achilles you'll avoid bumps and bruises from debris kicked up off the trail while the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. What more could you want when ripping MTB trails?Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Cross-tension straps for pedal efficiency and weather protectionUpper: Synthetic Leather - Water-resistant and easy to cleanTongue: Low-profile, padded and weather-resistantProtection: Inner ankle mid-height protectionReinforcements in toe, heel and AchillesBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.