When your thoracic rear strut snaps off during an unexpected fall from the saddle it is important to always have a plan B should it become worn or damaged. The DBX 6.5 Thoracic Pack is a must for all offroad riders who want a heavily armed arsenal when attacking berms and kickers, providing a durable alternative to keep you protected 24/7.
If you prefer to get clipped in and ride, then the DBX 4.0 Clipless Shoes are for you. They've been built from the ground up to deliver tough but comfortable mountain bike performance. The DBX 4.0s start with great pedalling efficiency. A rigid pedal section getting the power down easily. Next, the ClipGrip Sole gives you extended cleat adjustment; set your cleats further forward for pedalling performance or further back for gravity-fed riding. Simple. If you're not quite clipped in, don't fret either, the super-sticky RideGrip Compound and optimized grip pattern grip your pedals tenaciously until you can find your clip-in point. When you're off the bike and pushing then the flexible toe won't let you slip and mud-flow channels in the heel keep your shoes free of clag and sure-footed on any terrain. The upper of the 4.0s are made from durable synthetic leather, making them easily tough enough for all your mountain bike escapades. Not only is it tough but it's supple too, for superb comfort. If you're riding muddy trails you'll be pleased to know the upper is water-resistant and it's easy to clean too. Leatt have given you copious protection too, with reinforced toe, heel and Achilles sections. And the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
Taking you from fast flow trails to technical downhill races to challenging mountain bike enduro adventures, the DBX 5.0 Clipless Shoes get you clipped in and pedalling with confidence. The DBX 5.0s start with great pedalling efficiency. A rigid pedal section getting the power down easily. Next, the ClipGrip Sole gives you extended cleat adjustment; set your cleats further forward for pedalling performance or further back for gravity-fed riding. Simple. If you're not quite clipped in, don't fret either, the super-sticky RideGrip Compound and optimized grip pattern grip your pedals tenaciously until you can find your clip-in point. When you're off the bike and pushing then the flexible toe won't let you slip and mud-flow channels in the heel keep your shoes free of clag and sure-footed on any terrain. When it comes to the construction of the upper, the DBX 5.0s makes use of innovative 3D knit. This gives you a highly breathable and light upper, and yet it's also water-resistant too. Whether it's hot and dusty or cool and muddy, you've got comfort built-in. To protect your feet from bumps and bruises, Leatt uses PU reinforcements, with super-tough toe and heel protection fending off rock and root strikes. With their concealed lacing system and cross-tension straps, you'll always enjoy a secure fit too, keeping you locked in as you pedal hard out of fast berms and flash along sweet singletrack. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
When you're dropping into technical mountain bike trails, speeding into berms and accelerating up to speed for a big booter, the DBX 3.0 Flat Pedal Shoes keep your feet safe and secure on the pedals, no matter what. The key to the unshakeable grip is the combination of an optimized grip pattern in the pedal area and the top-secret, super-sticky RideGrip Compound. Not only is grip superb, but pedalling efficiency is ruthlessly good too - a rigid pedal area getting your power to the pedals in a flash. Meanwhile, mud-flow channels keep the sole as clear of mud as possible and a flexible toe area helps you when pushing up the hill to session a feature. The upper of the DBX 3.0s are made from water-resistant synthetic leather. Not only will this keep your feet comfier as you splash along muddy trails, but it's also tough too, with protective reinforcements over the toe, heel and Achilles. The delicate ankle area you'll be pleased to see also gets some extra protection from the sting of crank hits - phew. And finally, a low-profile padded tongue keeps comfort levels perfectly tuned while also being weather-resistant.
Luckily, after dusting yourself down from your crash, you've done a quick search of a well-known search engine and found your self here at the page of a replacement Leatt DBX 3.0 DH V20.1 Visor. The next bit is as follows: add to basket, go to checkout, pay and then before you know it your new visor will be there in your hands to get your lid back in the game. Now time to hit the trails again - but do try not to crash again - it hurts.
With its high-performance protection and three-way adjustability for that all-important customised fit, the DBX 5.5 Neck Brace deploys technology to direct crash forces from your helmet all the way to your body, bypassing your neck. Also using a collarbone cut-out on the brace to keep your helmet away from fragile bones, the rear thoracic strut has a dual plate design ready to snap off before applying pressure to the back. CE tested and certified for personal protective equipment, the neck brace has a low profile push-button open and closure system. Improving comfort and fit, this breathable body armour is perfect for installing confidence in any ride. Added features: Engineered collarbone cut-out to help keep your helmet and brace away from your most fragile bones Injected, durable and easy-to-clean foam padding Air flow ribbed body padding for optimum ventilation Folding rear thoracic strut for easier packing Free, optional, clear chest strap included CE tested and certified as Personal Protective Equipment 89/686/EEC Engineered and lab proven by a medical doctor and biomedical engineers Trusted by some of the fastest downhill racers in the world Unisex fit Weight: from 790g
When your original becomes damaged from endless shredding, pairing with the Replacement Visor for your DBX 4.0 Helmet will get you back on the trail quicker than ever. Protecting from the sun and shielding kicked up roost, this handy accessory is easy to attach to keep repair time to a minimum.
It is the impressive comfort and durability of the DBX 3.5 that makes it stand out from the crowd. Allowing for quick access and an immediate exit via the push button open/closure system, getting on the trail and shredding can be done as soon as you arrive. The robust, injection moulded padding keeps you protected from bumps and bruises and there is an optional chest strap to keep the brace in position. For those that ride aggressively the ribbed body padding is ventilated while the polyamide reinforced EPS construction keeps you safe should an unexpected fall from the bike occur. To help avoid odours Leatt have made the padding washable for a fresh feeling on every ride.
For use with Dbx/GPX only, this Pro Spacing Pin Kit is the perfect plan B should yours need replacing.
Complete Back Assembly Replacement part for use with the GPX Adventure Brace.
Complete Front Assembly Replacement part for use with the DBX Comp Brace. Colour: Black. Assembly excludes padding.
Replacement Front Assembly part for use with the Leatt DBX Ride - Assembly excludes padding.