Alé Sombra Wool Cycling SocksKeep your feet warm and cosy on the bike with the Ale Sombra Wool Cycling Socks.The Sombra Wool Cycling Socks mix Wool fibres with Dryarn, creating socks that provide reliable insulation against the cold while also offering excellent breathability. FeaturesMaterials: 37% Polypropylene, 30% Wool, 30% Acrylic, 3% ElastaneWool + Dryarn for warmth and breathabilitySuggested temperature range: 4 to 8 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Sombra Wool Cycling SocksKeep your feet warm and cosy on the bike with the Ale Sombra Wool Cycling Socks.The Sombra Wool Cycling Socks mix Wool fibres with Dryarn, creating socks that provide reliable insulation against the cold while also offering excellent breathability. FeaturesMaterials: 37% Polypropylene, 30% Wool, 30% Acrylic, 3% ElastaneWool + Dryarn for warmth and breathabilitySuggested temperature range: 4 to 8 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé PRR Magnitude Cycling JacketWith a windproof and waterproof Windtex membrane and a soft microfleece inside, the Ale PRR Magnitude Cycling Jacket brings luxurious comfort and cosiness to your winter cycling sessions.Other riders might be putting their feet up when the weather is cold and damp. But that's not you. You'll be pulling on your PRR Magnitude Cycling Jacket and ticking off another winter training session. With many winter jackets, you can find that when you push the pace you'll quickly build a sweat. You then suffer from sweat-induced shivers when easing the pace. However, the fabrics used for the Magnitude allow excellent breathability during more intense training efforts. This lets sweat escape quickly and the result is you'll remain at just the right temperature for comfort. A combination of softshell fabrics also gives you excellent protection against both wind and rain. 3-layer W-Wind 3L Square with Windtex MembraneThis high-performance laminated fabric offers both wind and water protection alongside cosy warmth. The Windtex membrane offers a waterproof rating of 10,000mm and blocks winds completely too. The inner face is a soft grid-square fleece that creates air pockets that trap warm air and retains body heat. 3-Layer Wave DWRThis laminated fabric offers rain protection while also offering excellent breathability and windproof protection. To the inside, a 'WAVE' design has been engineered to improve sweat-wicking and maintain 'air chambers' that regulate body temperature. Racing FitThe fit of the jacket is tailored to be close to the body and streamlined. This increases your cycling efficiency, saving precious energy for those last few kilometres of winter base rides. FeaturesMaterials: 87% Polyester, 13% Elastane3-layer W-Wind 3L Square with Windtex membrane - rated 10,000mm water columnB-Tour DWR + W-Wind 3L Wave DWRQuick-wicking and breathableRacing Fit - optimised for aerodynamics - for a regular fit we recommend going up a sizeSuggested temperature range: -2 to 8 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé Women's PRS Bridge Cycling JacketMaking use of a host of technical wind and water-resistant textiles and with an inner zipped 'vest' for thermoregulation, the Alé Women's PRS Bridge Cycling Jacket offers comfort for the harshest of winter cycling conditions.With a windproof and waterproof eVent Exagon membrane and insulating inner zipped 'vest' panel, the Women's PRS Bridge Cycling Jacket is adept at dealing with ever-changing winter weather conditions and for the coldest of days on the bike. The jacket has a unique construction. Providing protection against cold and wet conditions is the eVent Exagon membrane. This is paired with an inner insulating Thermo Fleece 'vest' chest panel and areas of highly breathable fabrics where needed most. This combination allows for versatile weather protection and easy control of heat regulation.Unzipping the outer zipper allows you to increase cooling air circulation through the jacket, ideal when you're working hard to crest a hill climb or facing into a headwind. However, with the outer zip open and its separate inner thermal layer zipped up, you'll still keep a chill off your chest while still boosting ventilation.eVent DV Stretch technologyThis laminated water-repellent and windproof membrane give the Storm Combi Cycling Jacket its outstanding all-weather performance, blocking wind and keeping you dry during periods of light rain and sudden showers.Its high degree of breathability also prevents water vapour build-up on the inside when you're pedalling hard or conditions improve. The internal 'Wave' structure also draws sweat off the skin and effective air chambers regulate body temperature.Racing FitThe fit of the jacket is tailored to be close to the body and streamlined. This increases your cycling efficiency, saving precious energy for those last few kilometres of winter base rides.FeaturesMaterials: 86% Polyester, 14% ElastaneeVent Exagon DWR fabric - 10,000mm waterproof ratingSoft Shell Wave DWR + Thermo Fleece DWR for insulating warmth, breathability and water repellencyReflective details for visibilityRacing Fit - optimised for aerodynamics - for a regular fit we recommend going up a sizeSuggested temperature range: -5 to 10 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Alé PRS Bullet DWR Cycling JacketWith a windproof and water-resistant Windtex membrane, the Ale PRS Bullet DWR Cycling Jacket lets you cycle comfortably when the weather is inclement. A streamlined fit saves you energy too.Cold. Wet. Windy. Conditions that may put off some from heading out. But with the PRS Bullet DWR Cycling Jacket, you'll enjoy excellent protection when the weather is at its worst. Thanks to its combination of Windtex membrane and a DWR (Durable Water Resistant) surface finish, the jacket is completely impervious to wind and offers a high degree of water resistance,To the inside, a three-dimensional fabric works to trap body heat and also offers excellent breathability. This prevents the build-up of humidity and condensation on the inside, ensuring you're not left cold and damp when you're working hard on the bike. This jacket locks in warmth and delivers unrivalled comfort for when you're building up your winter mileage.Racing FitThe fit of the jersey is tailored to be close to the body and streamlined. The J-Stability System at the waist keeps the fit snug as you get low into the drops.FeaturesMaterials: 100% PolyesterWindproof and water-resistant (10,00mm) WindTex membraneBody MappingSemicircular fleece insert on the back collarZippered back pocketJ-Stability SystemAll logos are reflectiveVentilation openings at the frontRacing fitSuggested temperature range: -3 to 6 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Athletic, dynamic yet downscaled, clean. The ALPINA PARANA is a touring bike helmet for sporty cyclists with high standards for their own style and safety. Thanks to the Hi-EPS and inmold construction, the ALPINA PARANA is very lightweight while also protecting the head in the event of an impact. The proven ALPINA fit ensures that the bike helmet fits perfectly and does not slip and or pinch. With the adjustable Run System Ergo Flex+, the bike helmet can be adjusted individually to the head. The system is lightweight and delicate yet robust. The dynamically designed helmet not only creates a light and modern look, but also ensures that the head is well ventilated. This provides a cool head, maximum comfort and tons of fun on long bike rides. Key Features: Aantibacterial Interior - Less formation of bacteria and odour when sweating thanks to special cushioning material, Fly Net - Mesh in the front ventilation openings keep insects away from your head, Shield Protect - Shield provides protection against spray and the sun,. Technologies: Ceramic Shell - Durable outer shell thanks to the 3 shell construction, Ergomatic - Easy-to-operate belt buckle with twist-proof, multi-stage automatic lock, Hi-EPS - Optimum impact absorption thanks to Hi-EPS material made from microscopic little air chambers, Inmold - Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS, Y-Clip - Adjustable straps by ears, Edge Protect - The lower edge of the helmet is protected by the polycarbonate shell Edge Protect, Airflow Venting - Strategically arranged ventilation openings guarantee ideal air flow in the interior, Custom Fit - Individual helmet adjustment thanks to tilting adjustment system on back of head, Run System Ergo+ - With the Run System Ergo+, which can be combined with the height-adjustable Custom Fit System, the Anzana can be perfectly adapted to your head shape.
Whether it’s on the trail, on a freeride or with the E-Fully at the bike park, the ROOTAGE EVO is a great choice. First of all, the over-ear helmet construction provides significantly more safety for side impact than a half-shell helmet. Furthermore, the EPP used on the ears is a multi-density material that doesn’t lose its protective effect even after multiple impacts and is also used in the back of the helmet. The fixed visor directs air into the large ventilation channels in the ROOTAGE EVO, cooling the head. The ROOTAGE EVO is the first bike jet helmet with a size adjustment system and also allows the wearer to wear a neck brace. Protection, comfort and flow are guaranteed with the ROOTAGE EVO. Key Features: Antibacterial Interior - Less formation of bacteria and odour when sweating thanks to special cushioning material, Fly Net - Mesh in the front ventilation openings keep insects away from your head, Shield Protect - Shield provides protection against spray and the sun,. Technologies: EPP - Multi density material that does not lose its protective effect even after multiple impacts, Ceramic Shell - Durable outer shell thanks to the 3 shell construction, Hi-EPS - Optimum impact absorption thanks to Hi-EPS material made from microscopic little air chambers, Inmold - Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS, Edge Protect - The lower edge of the helmet is protected by the polycarbonate shell Edge Protect, Run System Ergo Flex -The smooth-operating and soft to the touch Run System Ergo Flex guarantees the greatest possible level of comfort, 3D-Fit - The height setting of the Run System can be adjusted individually.
Navigating trails strewn with roots and rocks can get pretty tricky. A full-face helmet provides the optimum protection in this situation, with a robust chin strap that protects the head both from below and on the side lest the journey come to an abrupt end when the rider is pitched over the handlebars. Ideally that wouldn’t happen. If it doesn’t, the ROCA is simply just comfortable to wear thanks to the lightweight inmold construction and fixed visor that provides protection from the sun, mud and rocks. Two helmet sizes with two sets of pads each ensure that the ROCA will fit every rider. And the DD-Buckle chin fastener keeps the ROCA firmly on the head while shredding - and on hang outs. Combined with the new Scarabeo MTB, your head is protected all the way around. Key Features: Cam Ready - Extra space for camera mounting, Shield Protect - Shield provides protection against spray and the sun,. Technologies: Ceramic Shell - Durable outer shell thanks to the 3 shell construction, Hi-EPS - Optimum impact absorption thanks to Hi-EPS material made from microscopic little air chambers, Inmold - Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS, Edge Protect - The lower edge of the helmet is protected by the polycarbonate shell Edge Protect, Airflow Venting - Strategically arranged ventilation openings guarantee ideal air flow in the interior.
Large paving stones, weathered, overgrown, blocked – this is what is left over from the old pass road to the Col d'Anzana. The remnants from days gone by are the basis for something new today. The rough route down to Tirano has become a popular trail for enduro riders, because it is so technically demanding and requires total concentration. That is why maximum protection is needed for the descent. This is exactly why it is the inspiration for the ALPINA ANZANA. The ANZANA is priced in the enduro entry-level range. Nevertheless, it is equipped with top features from ALPINA's technology box and so offers an excellent price-performance ratio. Above all, the high-quality Run System Ergo Plus guarantees optimal grip. With its fine adjustment, it fits any head perfectly. In addition, the height of the adjustment system can be adjusted via the Custom Fit System. This results in a secure fit and optimal protection. The outer shell of the helmet is made of a robust polycarbonate plate, which is thermally connected to the Hi-EPS in the inmold procedure. This results in a solid surface connection, which creates extra stability. Thanks to the ‘Made in Germany’ quality, the highest degree of production quality is also guaranteed. The ANZANA’s equipment list also includes the large visor, which protects the field of vision, an antibacterial and washable padding for a high level of comfort and a fly screen in the front ventilation openings. You are perfectly prepared for your next enduro experience thanks to the new ALPINA ANZANA. Key Features: Antibacterial Interior - Less formation of bacteria and odour when sweating thanks to special cushioning material, Fly net - Mesh in the front ventilation openings keep insects away from your head, Shield Protect - Shield provides protection against spray and the sun,. Technologies: Ceramic Shell - Durable outer shell thanks to the 3 shell construction, Ergomatic - Easy-to-operate belt buckle with twist-proof, multi-stage automatic lock, Hi-EPS - Optimum impact absorption thanks to Hi-EPS material made from microscopic little air chambers, Inmold - Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS, Y-Clip - Adjustable straps by ears, Airflow Venting - Strategically arranged ventilation openings guarantee ideal air flow in the interior, Custom Fit - Individual helmet adjustment thanks to tilting adjustment system on back of head, Run System Ergo+ - With the Run System Ergo+, which can be combined with the height-adjustable Custom Fit System, the Anzana can be perfectly adapted to your head shape.
The ALPINA DELFT MIPS is a touring bike helmet with extra protection against brain injuries that can be caused by rotational forces in a lateral impact. The first helmet with height-adjustable MIPS: The ALPINA DELFT MIPS is a touring bike helmet with extra protection against brain injuries that can be caused by rotational forces in a lateral impact. The combination of Run System Ergo Flex and MIPS offers many advantages. The height-adjustable system allows the bike helmet to be adjusted in height, it is comfortable and with MIPS, provides extra safety in a lateral impact. Thanks to the Hi-EPS and inmold construction, the ALPINA DELFT MIPS is very lightweight while also providing protection in the event of an impact. The dynamically designed helmet not only creates a light and modern look, but also ensures that the head is well ventilated. This provides a cool head, maximum comfort and tons of fun on long bike rides. Key Features: Antibacterial Interior - Less formation of bacteria and odour when sweating thanks to special cushioning material, Fly Net - Mesh in the front ventilation openings keep insects away from your head, Shield Protect - Shield provides protection against spray and the sun,. Technologies: MIPS - MIPS provides additional protection against brain injuries that can be caused by rotational movements during an impact, Run System Ergo Flex Mips - The combination of Run System Ergo Flex and Mips offers many advantages: perfect adjustment including height adjustment, comfort and safety, Ceramic Shell - Durable outer shell thanks to the 3 shell construction, Ergomatic - Easy-to-operate belt buckle with twist-proof, multi-stage automatic lock, Hi-EPS - Optimum impact absorption thanks to Hi-EPS material made from microscopic little air chambers, Inmold - Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS, Y-Clip - Adjustable straps by ears, Edge Protect -The lower edge of the helmet is protected by the polycarbonate shell Edge Protect, Airflow Venting - Strategically arranged ventilation openings guarantee ideal air flow in the interior, Custom Fit - Individual helmet adjustment thanks to tilting adjustment system on back of head.
The Panoma Classic is at home in the city and on trips. A classic design and long list of features make the bike helmet the ideal companion for your next ride. The Panoma Classic has a tried and tested fit that works well especially for narrow heads. The Run System Classic allows it to adjust to any head shape. The low weight is due to the inmold production where the upper shell is thermally connected with the Hi-EPS. This results in a solid surface connection, which is responsible for a very sturdy design. The processing quality is of the highest level thanks to Made in Germany. 23 openings ensure optimum ventilation, while fly screens keep insects away from the head. A Multi-Fit Light can be retrofitted for optimum visibility. Key Features: Fly Net - Mesh in the front ventilation openings keep insects away from your head, Shield Protect - Shield provides protection against spray and the sun,. Technologies: Ceramic Shell - Durable outer shell thanks to the 3 shell construction, Ergomatic - Easy-to-operate belt buckle with twist-proof, multi-stage automatic lock, Hi-EPS - Optimum impact absorption thanks to Hi-EPS material made from microscopic little air chambers, Inmold - Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS, Y-Clip - Adjustable straps by ears, Airflow Venting - Strategically arranged ventilation openings guarantee ideal air flow in the interior, Run System Classic - The Run System Classic, which is combined with the height-adjustable Custom Fit System, ensures optimal adjustment possibilities.
Kids need the most protection for the smallest heads. In the Disney collection, ALPINA has combined three helmets with exclusive designs that cover a wide range of uses and the age range from one to ten. Ariel, Rapunzel and Minnie Mouse will accompany all girls next season on their bike rides. Donald Duck, his nephews Tick, Trick and Track, and the Star Wars heroes will join the boys on their rides. Everything is geared towards maximum safety with maximum comfort. The three helmets adjust perfectly and individually to kids' heads due to their Run Systems. The perfect fit and the best possible protection are thus guaranteed at all times. Detailed solutions, such as the integrated fly screen, antibacterial and washable paddings, the practical Y-distributor under the ears and the Ergomatic ratchet closure on the chin make handling the helmets a breeze. Key Features: Fly Net - Mesh in the front ventilation openings keep insects away from your head, Reflectors - Reflective elements ensure increased visibility at dusk or at night. Technologies: Ceramic Shell Durable outer shell thanks to the 3 shell construction,Ergomatic Easy-to-operate belt buckle with twist-proof, multi-stage automatic lock,Hi-EPS Optimum impact absorption thanks to Hi-EPS material made from microscopic little air chambers,Inmold Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS,Y-Clip Adjustable straps by ears,Edge Protect The lower edge of the helmet is protected by the polycarbonate shell Edge Protect,Airflow Venting Strategically arranged ventilation openings guarantee ideal air flow in the interior,Run System Classic Slide The Run System Classic Slide allows for a three-dimensional adjustment to your head.