Saltstick 100 Electrolyte CapsulesThe Saltstick electrolyte capsules help to minimize heat stress and muscle cramping thanks to the formulation mimicing the electrolyte profile lost during activity.When undertaking any activity in hot weather, whether that is running, cycling or any other physical endeavour you will lose electrolytes through sweat. Saltstick capsules contain key electrolytes sodium, potassium, magnesium, and calcium in quantities that mimic what your body loses, ensuring you can maintain peak performance for longer.Directions for UseFor best results, take 1 capsule every 30-60 minutes during activity.Nutritional Information Per 1 Capsule ServingVitamin D3 (mcg)100Calcium (mg)22Magnesium (mg)11Chloride (mg)350Sodium (g)0.22Potassium (mg)63Ingredients: Hypromellose (Vegetable Capsule), Magnesium Stearate and Stearic Acid.Allergen Information: For allergen information see ingredients in bold.FeaturesHelps you stay hydrated during intense sporting sessionsGreat for effective rehydration during international travel, hiking and after the consumption of alcoholFree of banned substances and independently testedVegetable-based capsule compositionBio-available active ingredientsSuitable for vegetariansNot suitable for vegansBuy SaltStick Hydration from Chain Reaction Cycles, the World's Largest Online Bike Store.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
Ready to deliver crisp, reliable performance on E-MTBs, this Shimano electric bike chainring has the extra strength and rigidity that's needed for the higher torque that E-Bikes deliver through the drivetrain.
Shimano SD300 Di2 Electric WireThe SD300 Di2 Electric Wire from Shimano is compatible with the Shimano Di2 E-Tube system and is intended for use with Shimano Di2 electronic drivetrain components and frame's that feature internal cable routing.Shimano E-Tube CompatibleE-Tube is Shimano's “service” that uses websites or apps to maximize the enjoyment of riding a bicycle by connecting the riders, the bicycles and Shimano. Shimano's genuine application E-Tube Project for Mobile allows you to customize your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get more detailed bike maintenance by connecting to your bike by wire with E-Tube Project via the Windows V4 application.Features:More compact design makes new electric components smaller and lighterWill potentially expand the future capabilities of DI2 systemsFor internal routing usage (wire holder included)Shimano Part Number: EW-SD300-ICompatible System: Shimano E-TUBE systemA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano SD300 Di2 Electric WireThe SD300 Di2 Electric Wire from Shimano is compatible with the Shimano Di2 E-Tube system and is intended for use with Shimano Di2 electronic drivetrain components and frame's that feature internal cable routing.Shimano E-Tube CompatibleE-Tube is Shimano's “service” that uses websites or apps to maximize the enjoyment of riding a bicycle by connecting the riders, the bicycles and Shimano. Shimano's genuine application E-Tube Project for Mobile allows you to customize your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get more detailed bike maintenance by connecting to your bike by wire with E-Tube Project via the Windows V4 application.Features:More compact design makes new electric components smaller and lighterWill potentially expand the future capabilities of DI2 systemsFor internal routing usage (wire holder included)Shimano Part Number: EW-SD300-ICompatible System: Shimano E-TUBE systemA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The powerful compression support in the Vectr Light Cushion Socks securely locks the foot in place, resulting in stabilisation and optimal movement throughout your range of motion. For comfort, 2XU have included light cushioning to support the forefoot and heel impact, an anti abrasion seamless toe construction and a design that has been carefully crafted to prevent blisters. Polygeine treatment also offers permanent antibacterial and anti-odour technology, allowing the socks to stay fresh over a prolonged period of time.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
Tioga's Spectr Dual Ply Race tire was built and designed to always be providing traction. It's sleek and fast rolling where you want it with traction and grip where you need it. A smooth rounded tread profile rolls efficiently and precisely across a wider range of turning angles thanks to its unique GripPod tread clusters. Those GripPod clusters are designed to add even more grip under applied pressure, when combined with their deep angular grooves the tread pattern provides exceptional cornering traction. Max pressure rating: 100 psi ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 100 PSI WEIGHT: 20" x 2.25" - 645g (22.7oz) 20" x 2.4" - 805g (28.3oz) PACK SIZE: Single
Genuine Vitus Spare Parts.
Shimano SD300 Di2 Electric WireThe SD300 Di2 Electric Wire from Shimano is compatible with the Shimano Di2 E-Tube system and is intended for use with Shimano Di2 electronic drivetrain components and frame's that feature internal cable routing.Shimano E-Tube CompatibleE-Tube is Shimano's “service” that uses websites or apps to maximize the enjoyment of riding a bicycle by connecting the riders, the bicycles and Shimano. Shimano's genuine application E-Tube Project for Mobile allows you to customize your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get more detailed bike maintenance by connecting to your bike by wire with E-Tube Project via the Windows V4 application.Features:More compact design makes new electric components smaller and lighterWill potentially expand the future capabilities of DI2 systemsFor internal routing usage (wire holder included)Shimano Part Number: EW-SD300-ICompatible System: Shimano E-TUBE systemA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano SD300 Di2 Electric WireThe SD300 Di2 Electric Wire from Shimano is compatible with the Shimano Di2 E-Tube system and is intended for use with Shimano Di2 electronic drivetrain components and frame's that feature internal cable routing.Shimano E-Tube CompatibleE-Tube is Shimano's “service” that uses websites or apps to maximize the enjoyment of riding a bicycle by connecting the riders, the bicycles and Shimano. Shimano's genuine application E-Tube Project for Mobile allows you to customize your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get more detailed bike maintenance by connecting to your bike by wire with E-Tube Project via the Windows V4 application.Features:More compact design makes new electric components smaller and lighterWill potentially expand the future capabilities of DI2 systemsFor internal routing usage (wire holder included)Shimano Part Number: EW-SD300-ICompatible System: Shimano E-TUBE systemA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates corrosion and stretching but provides effortless gear shifts Ultegra Di2 uses a fully removable individual cable system from the battery indicator junction box enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal to the rear mech front mech battery and to the handlebar battery indicator junction box EW-SD50 individual wires are available in varying lengths there is no need (or facility) to cut these cables Reliable and secure water resistant connectors