Size specific elite-level platform pedal provides optimal shoe/pedal interface. Details Magnesium pedal body for weight reduction Optimal surface area Minimal body profile - 16mm thin Concave pin profile & 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material AM60B Magnesium Alloy endcap T15 footprint small footprint large 100mm x 100mm 114m x 111mm inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 351g per pair 386g per pair
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Moulded traction pins and diamond plate area provide grip and support. Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Double shot Weight (per pair) 403g Spindle Forged scm 435 chromoly steel Body A380 aluminum Wings Stamped steel Spring 300 series stainless steel inner bearing Igus LL-glide bearing Cleats premium brass cleats included Pins 8 adjustable traction pins release angle 15° or 20° Warranty 5 years
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 11 pedal is a clipless pedal with a small platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Extremely lightweight: pedal design is very simple with only a few key parts. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 11 Weight (per pair) 249g Spindle 6al / 4v titanium Body 6061-T6 aluminium Wings 6al / 4v titanium Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
Compatible with most cable-actuated dropper posts. Universal mounting system — top or bottom left or right Single bolt hinge locking system Infinite spherical adjustment 360° rotation / 22° tilt
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Moulded traction pins and diamond plate area provide grip and support. Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers and Enduro bearings. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Specification Weight (per pair): 331g Spindle: Forged scm 435 chromoly steel Body: Composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Cleats: premium brass cleats included Pins: Moulded traction pins Release angle: 15° or 20° Warranty: 5 years
Crankbrothers have released a range of shoes to Match their pedal system. The Mallet BOA is the perfect pair to combine with Mallet DH pedals and hit the trails.Featuring an additional 5mm length track length for a slammed back cleat position for control and stability when dropping the heels when the taking on the most aggressive trails. Upper BOA Fit System & Strap for micro-adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Race zone cleat placement for control and stability. Ramp for easy clip-in / clip-out and mud clearance. Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
Shoes designed to match crankbrothers pedal ranges. Mallet E is designed to be ideal for big days out on the bike. They combine a stiff shank for pedalling efficiency with a ramped toe and grippy tread making them ideal for hike a bike situations. Combine with the Mallet E or Mallet E long spindle pedals. Upper BOA Fit System & strap for micro-adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Ramp for easy clip-in / clip-out and mud clearance Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
Shoes designed to match crankbrothers pedal ranges. Mallet E is designed to be ideal for big days out on the bike. They combine a stiff shank for pedalling efficiency with a ramped toe and grippy tread making them ideal for hike a bike situations. Combine with the Mallet E or Mallet E long spindle pedals. Upper Round laces for smooth closure. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals: Ramp for easy clip-in / clip-out and mud clearance Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
Shoes designed to match crankbrothers pedal ranges. Mallet E is designed to be ideal for big days out on the bike. They combine a stiff shank for pedalling efficiency with a ramped toe and grippy tread making them ideal for hike a bike situations. Combine with the Mallet E or Mallet E long spindle pedals. Upper Speedlace and strap for fast and secure adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Ramp for easy clip-in / clip-out and mud clearance Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
The Mallet Lace is the perfect pair to combine with Mallet DH pedals and hit the trails. Featuring an additional 5mm length track length for a slammed back cleat position for control and stability when dropping the heels when the taking on the most aggressive trails. Upper Round laces for smooth closure. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Race zone cleat placement for control and stability. Ramp for easy clip-in / clip-out and mud clearance Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
Crankbrothers have released a range of shoes to Match their pedal system. The Mallet Speedlace is the perfect pair to combine with Mallet DH pedals and hit the trails.Featuring an additional 5mm length track length for a slammed back cleat position for control and stability when dropping the heels when the taking on the most aggressive trails. UpperSpeedlace & strap for fast and secure adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold.Hidden eyelets for durability and clean design.OutsoleMatch Box optimised for any MTB pedals;Race zone cleat placement for control and stability.Ramp for easy clip-in / clip-out and mud clearancePre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride.Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box.MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking.Ramped toe for walkability.Stiff shank for power transfer when pedalling.Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
Shoes designed to match crankbrothers pedal ranges. Stamp shoes combine perfectly with the crankbrothers flat pedal range. Grip is priority to keep you feeling connected to the bike. Upper BOA Fit System & strap for micro-adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole MC2 high-friction for grip and contact between pedal and shoe. Stamp tread pattern optimised for contact surface and compatibility. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.