crankbrothers Candy 2 Clipless Mountain Bike PedalsDesigned for optimised control and performance when tackling tough mountain bike trails, the Candy 2 Clipless Pedals from crankbrothers are ready for the challenge. Benefiting from a lightweight, aluminium construction, they feature four-sided entry and an exceptional mud-shedding quality, to help keep you going in all-weather conditions. Features: Body Material: 6061-T6 Aluminium Spindle Material: Forged 435 Chromoly (CrMo) Spring Material: 300 series Stainless Steel Wing Material: Stamped Steel End cap: Slotted Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Cleats Type: Premium Brass cleats with shims includedCleats Included: YesQ-Factor: 52mm Release Angle: 15°/20° Ribbed body for better traction when unclipped Four-sided entry and superior mud-shedding Customisable float & release angle Premium bearings & double seal system Snap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Weight: 355g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of ridingremove the pedal body from the spindle and wipe it clean of any dirty greaseapply fresh grease to the inside of the pedal before re-installing the spindle
crankbrothers Eggbeater 2 MTB PedalsThe Eggbeater 2 pedal is slightly lighter than its brother the Eggbeater 3. Features Crank Brother's exclusive, four-sided entry, mud shedding design, and weight saving minimalism.Features: Cast stainless body and spring with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and cartridge bearing outer Plastic end caps Brass cleat and mounting hardware included Weight: 272g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
crankbrothers Doubleshot 3 Clipless MTB Pedalscrankbrothers' Doubleshot 3 Pedals bring their game changing hybrid design to aggressive trail riders. They allow you to use the pedals as standard flats on one side or clipped in on the other. This latest version features a much wider Q-factor for increased stability when you're railing around corners at high speed. The Doubleshot 3's are equipped with 8 adjustable pins and diamond plates on either side, so you'll be able to accelerate even more efficiently and maintain your position no matter how rough the trail gets.Features: Body Material: A380 Aluminium Spindle Material: Scandium 435 CrMo Wing Material: Stainless Steel Hybrid pedal, suitable for riding flat or clipped in 8 adjustable pins per side for grip Diamond plate pads give traction 2 sided entry with superior mud shredding Superior mud shedding capabilities Double seal system increases durability Premium brass cleats with shims included Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Release angle: 15°/20° Q-Factor: 57mm 5 year crankbrothers warranty Weight: 403g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Reliable Performance in all Conditions The crankbrothers Stamp 2 Flat Pedals use extremely durable sealed cartridge bearing that provide performance and smoothness that you can rely on in all conditions. A super thin 16mm profile provides added clearance, making these pedals less susceptible to rock strikes and 10 adjustable pins per side provide fully customisable grip.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of riding remove the pedal body from the spindle and wipe it clean of any dirty grease apply fresh grease to the inside of the pedal before re-installing the spindle Pedal features: Excellent mud-shedding: the design is very open 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rid Fit adjustment: crank brothers premium cleats can be adjusted for 10° release Customise the fit between your shoe and the pedal by using tread contact sleeves Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in part When servicing this pedal, use the rebuild kit designed for level 1 & 2 pedals
crankbrothers Klic HV Hybrid CO2 Mini Hand PumpThe Klic Hv Hybrid Pump from crankbrothers is a high-pressure portable hand pump with a hidden hose, pressure gauge and CO2 inflator. It features a flexible magnetic rubber hose and the Klic Hv can reach a max pressure of 110 psi while coming supplied with a mounting bracket.Innovative, Efficient and ErgonomicThis pump features the crankbrothers uniquely innovative flexible hose, which conveniently stores inside the pump and uses a unique magnetic interface to attach to the pump. The highly polished pump body has an integrated twisting collar to keep the pump free of dirt and debris and features an ergonomic t-handle to help make inflating tyres effortless.Features:Includes concealed CO2 inflatorAir pressure gaugePresta/Schrader valve adapterMagnetic head with twisting collarFolding and holding locking handleCO2 is compatible with Presta valves onlyComes with mounting bracketManufacturer Warranty: 5 yearsLength: 260mmWeight: 186gBuy crankbrothers Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 1 Mountain Bike PedalsEngineered to tackle tough mountain bike trails, the Eggbeater 1 Mountain Bike Pedals from crankbrothers features a lightweight, durable stamped steel construction and a long-lasting Chromoly (CrMo) spindle for unrivalled performance.Features: Stamped steel body and inner wing with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and outer bearings Plastic end cap Brass cleat and mounting hardware included Body Material: Stamped SteelSpindle: Forged CrMo steelBody & Wings: Stamped steelSpring: 300 series stainless steelInner Bearing: BushingOuter Bearing: CartridgeCleats: Premium brass cleats includedRelease Angle: 15 or 20 degreesWeight: 290gBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 1 Mountain Bike PedalsEngineered to tackle tough mountain bike trails, the Eggbeater 1 Mountain Bike Pedals from crankbrothers features a lightweight, durable stamped steel construction and a long-lasting Chromoly (CrMo) spindle for unrivalled performance.Features: Stamped steel body and inner wing with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and outer bearings Plastic end cap Brass cleat and mounting hardware included Body Material: Stamped SteelSpindle: Forged CrMo steelBody & Wings: Stamped steelSpring: 300 series stainless steelInner Bearing: BushingOuter Bearing: CartridgeCleats: Premium brass cleats includedRelease Angle: 15 or 20 degreesWeight: 290gBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Doubleshot 1 Clipless MTB PedalsA versatile pedal for the multi-terrain rider, these Crank Brothers pedals provide a superb clip-in experience when taken off-road while staying just as supportive when taking it easy through town. Comprising of a composite body and CrMo axle, each pedal features smooth and efficient bearings, diamond plate pads and moulded pins and ribs for enhanced grip. Coming complete with an easy release cleat kit, this pair is perfect for propelling you along your preferred route. Features: Body Material: Composite Axle Material: Forged 435 CrMo Wing Material: Stamped Steel Spring Material: 300 series Stainless Steel Release Angle: 10° Q-Factor: 57mm Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Pins: 6 per side, adjustable Cleat: Easy release cleat kit included Weight: 331g per pair Buy Crank Brothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.