Designed for XC racers. the premium 0 degree cleat gives a fire engagement with reduced float, resulting in ultimate power transfer and efficiency. Compatible with all crankbrothers pedals.Premium strength brass,Float: 0 degrees,Release angle: 15 degrees,Bolt pattern: 2 bolt,Adjustmet 2.2mm left/right,Shims included.
Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal.Key Features:Includes: 1mm, 2mm, 3mm sleeves,Compatible with candy and eggbeater 11, 3, and 2.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.Moulded traction pins and diamond plate area provide grip and support. Key Features:Excellent mud-shedding: machined pedal body helps further prevent mud clogging.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..Specification:Weight (per pair): 395g,Spindle: Forged SCM 435 chromoly steel,Body: A380 aluminum,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Cleats: premium brass cleats included,Pins: Moulded traction pins,Release angle: 15° or 20°,Warranty: 5 years.
Crank Brothers design and quality in an affordable package. Reversible head is compatible with Presta & Schrader valves. Large dual piston allows 2 effortless modes, 1-40 psi high volume and 40-100psi high pressure.Key Features:Material: 6061-T6 aluminium,Pressure: 130psi / 9bar,Air switch: High volume / high pressure,Mounting bracket: Not included,Warranty: 5 years,Length: Short 176mm, Long 205mm,Weight: Short 128g, Long 155g.
The ultimate pedal for enduro racing and riding.The Mallet E was developed with the help of some well-known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well-loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Key Features:Concave pedal platform for a secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless.,49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.,Ribbed body allows for better traction when unclipped,Chamfered edges for a reduction in rock strikes,Excellent mud-shedding: the design is very open.,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner Igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..
The original Cranks Brother's tool range. Compact and lightweight tools for any eventuality. Whether its making a minor adjustment or an on the trail repair these tools have you covered.Key Features:Frame: 6061-T6 aluminium,Tools: 6150 high tensile steel,Warranty: Lifetime,Weight: 168g,Length: 3.5" / 89mm,Chain tool: 8/9/10 speed compatible,Spoke wrench: #0,1, 2, 3,Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8,Screwdrivers: Phillips, flat,Open wrench: 8mm, 10mm,Torx: T-25.
The original Cranks Brother's tool range. Compact and lightweight tools for any eventuality. Whether its making a minor adjustment or an on the trail repair these tools have you covered.Key Features: Frame: 6061-T6 aluminium,Tools: 6150 high tensile steel,Warranty: Lifetime,Weight: 85g,Length: 3.5" / 89mm,Hex wrenches: #3, 4, 5, 6,Screwdrivers: Phillips.
Knuckle-saving tyre lever that removes and installs cycling tyres.Key Features:Weight : 26 g,Length: 144 mm,Material: nylon,Warranty: lifetime.
9mm or 15mm end caps for current generation crankbrother Cobalt front hubs.
Endcaps converts Iodine / Opium front hubs to 15mm or 20mm thru axle
Compatible with all 3rd generation cobalt and iodine wheelsets. Also compatible with 2nd generation cobalt and iodine wheelsets with 142x12 rear axle spacing.Not compatible with 1st generation wheels.Weight: 137g
The Crankbrothers Mallet E clip-in shoe excels for enduro races or all-day adventures. Featuring a carbon-injected nylon shank, the Mallet E shoe offers pedaling efficiency without compromising on shoe-to-pedal interface. Our innovative Match System optimizes engagement for any MTB clip-in system, whether that’s Crankbrothers or SPD. It comes with Match shim and Crankbrothers cleat pre-installed in a neutral position so they are ready to ride with Crankbrothers pedals right out of the box. Key Features: Outsole Match Box optimized for any MTB pedals,Ramp for easy clip-in / out and mud clearance,Pre-installed Match Shim for Crankbrothers pedals,Pre-installed cleat for Crankbrothers pedals,MC1 mid-friction compound for easy exit,Directional angled & spaced toe / heel lugs for traction while hiking,Ramped toe for walkability,Stiff shank for power transfer,Cushioned EVA midsole for shock absorption,. Upper Speed lace & strap for fast and secure adjustment,Lace pocket for safety and style,Ventilated windows with perforated mesh material for breathability,Padded tongue for protection,TPU reinforced areas for protection and abrasion resistance,Heel dots for grip and superior heel hold,Hidden eyelets for durability and clean design.