Key Features:Adapts Sram GXP road cranksets into 386Evo BB shells with a PF30 bottom bracket already installed.,Aluminium covered in plastic,Anodized green,Weight: 31.8g.
Genuine FSA replacement crank bolts to fit BB type - MegaExo.
World Cup proven for years, and in contrast to our Gen3 carbon cranks, the Q Factor, overall profile, and volume of our Gen4 cranks has been greatly reduced. Spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance.The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Smaller Q Factor, overall profile and volume. Spindle on non-drive side for easier chainguide setup and drivetrain maintenance. Adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. 8mm self-extractor. Key Features: Non-Boost, Boost, SuperBoost,Included APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual,World-Cup DH-rated layup and construction, compacted carbon fiber, with additional 3k added to front and rear faces of crank for impact resistance,Width 73mm, Diameter 30mm, Interface P3 Connect™.
FSA Armset with Wider Q-factor, compatible with BOSCH GEN2, YAMAHA PWX, POLINI engines Key Features:Forged AL6061/T6 crank arms ,ISIS drive ,Anodized black , laser graphics.Specification:Discipline: E-Bike,Material: Forged AL6061/T6,Engine: BOSCH, POLINI, YAMAHA.
Key Features:Hollow forged alloy arms,Forged AL7050 BB386Evo axle,AL7075 100% CNC machined chainrings,AL7075 Torx T-30 alloy chainring bolts,Fits Shimano and Sram 10-11 speed systems,Length: 170, 172.5 & 175mm,Direct mount outer chainring,Q-Factor: 147mm,Polished anodized black,2 tone with laser graphics,Weight: 755g.
Press-fit 30 bottom bracket to suit carbon or alloy road BB30 cranksets. Stainless steel cartridge bearings pre-installed in nylon cups for dependable performance. Compatible with BB386 Evo, PF30, and BBRight frame standards. Designed with clearance to allow internal routing of wiring for Di2 or other electronic shifting systems. Key Features: PF30 Road Bottom Bracket, Stainless steel PF30 cartridge bearing, Nylon cups Wave spring, bearing shield and spacer included, Nylon adjustment washers included, Type: Bottom brackets Manufacturer: FSA, Technology: BB386EVO, Discipline: ROAD, Material: Alloy, Weight: 50, Frame Dimension: BB386, PF30, PF30A, Compatibility: BB30, BB386.
Crank Brothers Premium Cleats are made of a premium brass for a longer life in adverse conditions, and lateral adjustment for pinpoint cleat location on the shoe.Key Features:Weight - 30g per pair,Float - 6 degree,Material - premium strength brass,Release angle - 15 degree or 20 degree,Compatibility - eggbeater, candy, smarty, mallet, acid,Shoes - mountain,Bolt pattern - 2-hole,Adjustment - 2.2mm left/right,Shims - included.
The highline remote features a unique spherical adjustment, with near-infinite rotation and tilt customisation options, for perfect cockpit ergonomics.Key Features:Pivot remote lever allows optimal ergonomic placement,Ergonomic spherical adjustment - 360 degree rotation / 22 degree tilt,Single bolt hinge locking system,Universal mounting system: top / bottom / left / right.
Ultra-durable brass cleats for crankbrother pedals.Key Features:Premium strength brass,Release angle: 10 degrees,Bolt pattern: 2 bolt,Adjustment: 2.2mm left/right,Shims included.
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.Key Features:Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness.,20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.,Small: 100mm x 100mm pedal body footprint,Large: 114mm x 111mm pedal body footprint,Available in red or black.Specification:Weight: 345g (Small), 375g (Large),Spindle: Forged scm 435 chromoly steel,Body: Forged 6061-T6,Inner bearing: Igus LL-glide bearing,Outer bearing: Igus LL-glide bearing,Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large),Pins: 10 adjustable pins per side,Warranty: 5 years.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 304g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Cast Steel,Spring: 300 series stainless steel,Inner bearing: Needle,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colour options: Black/Silver, Blue/Silver or Red/Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.