For when it’s wet and cold. Extra tough and durable.Key Features:Designed to protect you against cold and wet conditions,Neoskin waterproof layer on top of 3mm neoprene protects against the cold and rain,Extra tough and durable reinforced parts on shoe cover heel and nose,Glued seams make them 100% leakproof,Velcro strap allows these shoe covers to be used with (inline) skates Industrial strength YKK-zipper,Composition: 70% chloroprene rubber, 18% polyamide, 12% polyurethane.
Designed to offer the best protection against the cold.Key Features:Stretchable soft shell material, with inner membrane which will block the cold wind.,38 mm wide Velcro strap allows you to use these shoe covers for (inline)skates.,Reflective artworks for extra visibility.,All seams are covered inside with waterproof tape.,Industrial strength YKK-zipper with stormflap inside.,Composition: 48% polyester, 27% polyurethane, 20% SBR, 5% elasthane.
Key Features:Designed to protect you against cold and wet conditions,Extra tough and durable reinforced parts on shoe cover heel and nose,Ergonomic two panel design provides a minimum length of seams and a perfect fit,Neoskin waterproof layer on top of 3mm neoprene offers the best protection against the cold and rain,Glued seams make them 100% leak proof,Reflective artwork for extra visibility,Industrial-strength YKK zipper,Reversed zipper for the best performance in extreme weather,Velcro rubber strap for a secure fit.
The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
The Stash is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac. Each BikeParka has an elasticated bottom for close fit around the wheels and eyelets for ties or small locks. The cover can be tweaked to suit any seat and handle bar height. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
A super-sized cover for mountain bikes and those with wider handlebars or child seats. Same Ripstop fabric, same tough protection against the cold and wet.
Protect frames from housing scratches.Compatible with Ø3 to 5mm housings. Specification: Material: Silicone..
Slide over housings easily to protect frames from housing scratches. Specification: Material: Silicone..
Created to provide reliable protection in most conditions, apart from the very heaviest of rain, the ROS 2 Overshoes use a Polartec® Power Stretch® fleece lined front to keep cold winds out. To the sides, 3-layer fleece-backed waterproof panels resist drizzle and spray from damp roads. A YKK® water-resistant zipper makes them easy to pull on and off while not compromising the protection levels. And for low-light cycling, the reflective heel tab gives greater visibility to other road users.
When the temperature is starting to cool and cold winds blow, the Intenso UL Overshoes are there to stop the bite of those colder temperatures from causing discomfort. Warmth is kept firmly inside thanks to the Infinium Windstopper and it’s water-resistant too so can fend off light rain or spray from a damp road. For those of you who ride a bit of everything, you’ll find the strap closure allows compatibility with road or MTB shoes. And with a neoprene back panel, they fit snuggly and securely while allowing unrestricted pedalling.
The overshoe for riders who don’t stick to one discipline. The Castelli Intenso UL Shoecover is the perfect bootie for cool to cold days and has built in adaptability, so it can accommodate your road, mtb, or gravel shoe.Made from GORE-TEX™ INFINIUM™ WINDSTOPPER® fabric the overshoe is highly breathable, letting moisture escape while keeping the heat in. Completely windproof and water-resistant the fabric will protect your feet in a wide variety of conditions, and let you take your mind off the weather and focus on your riding. Neoprene details make the bootie fit perfectly.The bottom of the Intenso has a wide opening that accommodates road shoes, but also the bulkier treads of gravel and mountain bike shoes. A Velcro closure under the sole makes the perfect fit regardless of shoe choice. Durable panels wrap around the lower part for extra durability on those trail sections that demand to be traversed on foot. Key Features: GORE-TEX™ INFINIUM™ WINDSTOPPER® fabric keeps wind out and heat in while being ,highly breathable,Bottom opening accommodates road, gravel or MTB shoes and cleats,Velcro closure under foot for perfect fit,Durable panel wraps around lower part for protection when walking,Neoprene panel at back for perfect fit,0° – 14°C / 32° – 57°F,Weight: 180g (Pair),.
Booties aren’t just for winter. The Castelli Pioggerella Shoe Cover is a non-insulated, waterproof overshoe that is ideal for wet and windy rides in cool conditions. The Pioggerella uses a PU-coated waterproof stretch fabric to provide a great fit and waterproofing. A sealing silicone bead, wrap cuff and a waterproof zipper eliminate any points where the elements can get in and keep your feet comfortable.Key FeaturesWaterproof non-insulated bootie,PU-coated waterproof stretch fabric,Silicone bead at top of cuff to seal water out,Wrap cuff construction and waterproof zipper,Highly durable under the foot,8° – 18°C / 46° – 64°F,Weight: 100g (Pair).