Protect frames from housing scratches.Compatible with Ø3 to 5mm housings. Specification: Material: Silicone..
A super-sized cover for mountain bikes and those with wider handlebars or child seats. Same Ripstop fabric, same tough protection against the cold and wet.
The Stash is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac. Each BikeParka has an elasticated bottom for close fit around the wheels and eyelets for ties or small locks. The cover can be tweaked to suit any seat and handle bar height. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
Key Features:Designed to protect you against cold and wet conditions,Extra tough and durable reinforced parts on shoe cover heel and nose,Ergonomic two panel design provides a minimum length of seams and a perfect fit,Neoskin waterproof layer on top of 3mm neoprene offers the best protection against the cold and rain,Glued seams make them 100% leak proof,Reflective artwork for extra visibility,Industrial-strength YKK zipper,Reversed zipper for the best performance in extreme weather,Velcro rubber strap for a secure fit.
Designed to offer the best protection against the cold.Key Features:Stretchable soft shell material, with inner membrane which will block the cold wind.,38 mm wide Velcro strap allows you to use these shoe covers for (inline)skates.,Reflective artworks for extra visibility.,All seams are covered inside with waterproof tape.,Industrial strength YKK-zipper with stormflap inside.,Composition: 48% polyester, 27% polyurethane, 20% SBR, 5% elasthane.
For when it’s wet and cold. Extra tough and durable.Key Features:Designed to protect you against cold and wet conditions,Neoskin waterproof layer on top of 3mm neoprene protects against the cold and rain,Extra tough and durable reinforced parts on shoe cover heel and nose,Glued seams make them 100% leakproof,Velcro strap allows these shoe covers to be used with (inline) skates Industrial strength YKK-zipper,Composition: 70% chloroprene rubber, 18% polyamide, 12% polyurethane.
Designed to offer the best protection against the rain.Key Features:WaterFlex material, outer polyurethane (PU) rubber with inner,MicroFleece. Water-resistant, flexible and durable,38mm wide Velcro strap allows you to use these shoe covers for (inline) skates,All seams are covered inside with waterproof tape,Two reinforced parts between sole and zipper as well as on the nose,Industrial strength YKK zipper,50% polyester, 50% polyurethane.
The toughest shoe cover in our range, the ArcticDuty protects your feet in all winter conditions. The 3D-panel design offers a perfect fit and the 4.2 mm Sharkskin neoprene used on the outside keeps all water out. The inside is covered with 4.5 mm hydrophobic multi stretch nylon neoprene, combining optimum protection with an excellent fit. Nose and heel are reinforced with durable rubber for extra protection while walking. This is one for the fanatic winter biker.Features & Specs:Designed to protect in all winter conditions.,Ergonomic 3D-panel design provides a perfect fit.,Outside and front panel: 4.2 mm waterproof Sharkskin neoprene.,Inside panel: 4,5 mm hydrophobic multi stretch nylon neoprene combines optimum protection with excellent fit.,Glued seams combined with waterproof tape prevent water leakage.,Velcro rubber strap for a secure fit.,Industrial-strength YKK-zipper,Neoprene flap behind zipper.,Soft rubber Velcro strap for a secure fit and zipper protection.,Extra tough and durable rubber reinforced nose and heel part..
Designed to protect your feet against cold and wet conditions.Neoskin waterproof layer on top of 3mm neoprene offers the best protection against the cold and rain.Glued seams make them 100% leak proof.Reflective industrial-strength YKK-zipper.Two Kevlar reinforcements between sole and zipper as well as on the nose.Velcro rubber strap for a secure fit.
Tough shoe cover designed to give the best protection against the cold,3 mm multi stretch neoprene with Nylon reinforcements on both sides,Two Kevlar reinforcements between sole and zipper as well as on the nose.
The easiest to apply and most stowable foot protection packing outsized weatherproofing for the variable conditions of riding in spring and fall. Your extremities are the first casualties of cold wet cycling and your toes are the most extreme of them. These shoe covers borrow tech form our winter jackets so your toes lead into cold wet weather in pristine comfort. For the G2 generation we extended that coverage even further up the shoe; however the rest of the shoe remains uncovered to regulate internal temperature. Upper part: 42%PA 36%PL 22%EA - Sole: 100%PE