Designed to offer the best protection against the cold.Key Features:Stretchable soft shell material, with inner membrane which will block the cold wind.,38 mm wide Velcro strap allows you to use these shoe covers for (inline)skates.,Reflective artworks for extra visibility.,All seams are covered inside with waterproof tape.,Industrial strength YKK-zipper with stormflap inside.,Composition: 48% polyester, 27% polyurethane, 20% SBR, 5% elasthane.
Designed to offer the best protection against the rain.Key Features:WaterFlex material, outer polyurethane (PU) rubber with inner,MicroFleece. Water-resistant, flexible and durable,38mm wide Velcro strap allows you to use these shoe covers for (inline) skates,All seams are covered inside with waterproof tape,Two reinforced parts between sole and zipper as well as on the nose,Industrial strength YKK zipper,50% polyester, 50% polyurethane.
For when it’s wet and cold. Extra tough and durable.Key Features:Designed to protect you against cold and wet conditions,Neoskin waterproof layer on top of 3mm neoprene protects against the cold and rain,Extra tough and durable reinforced parts on shoe cover heel and nose,Glued seams make them 100% leakproof,Velcro strap allows these shoe covers to be used with (inline) skates Industrial strength YKK-zipper,Composition: 70% chloroprene rubber, 18% polyamide, 12% polyurethane.
The Stash is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac. Each BikeParka has an elasticated bottom for close fit around the wheels and eyelets for ties or small locks. The cover can be tweaked to suit any seat and handle bar height. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
A super-sized cover for mountain bikes and those with wider handlebars or child seats. Same Ripstop fabric, same tough protection against the cold and wet.
Protect frames from housing scratches.Compatible with Ø3 to 5mm housings. Specification: Material: Silicone..
Slide over housings easily to protect frames from housing scratches. Specification: Material: Silicone..
Durable and functional, the Diluvio UL Shoecover is honed to provide hard-wearing essential winter cover for your feet, and can accommodate road, mtb, or gravel shoes. Ideal for riders who get out no matter what and don’t limit themselves to one discipline.The overshoe is made from Castelli’s premium 3mm neoprene achieving water protection and warmth much like a wetsuit. Sealed seams and a neoprene cuff that seals around the ankle eliminate any weak points for water entry. The bootie closes with a YKK® zipper at the rear.The bottom of the Diluvio accommodates road shoes but also the bulkier treads of gravel and mountain bike shoes, and a Velcro closure under the foot creates a perfect fit whatever shoes you decide to wear. Key Features: 3mm neoprene for water protection and warmth,Velcro closure under foot for perfect fit,Bottom opening accommodates road, gravel or MTB shoes,Sealed seams,YKK® zipper,Neoprene skins at cuff to keep water out,2° – 14°C / 36° – 57°F,Weight: 200g (Pair).
Keeping feet warm is a great way to ensure comfortable winter riding. The Entrata Shoecover is designed to offer a functional and simple solution to cold toes.The Entrata is made from a 4-way stretch fabric with a durable water repellent treatment and a fleece lining. The stretch means the Entrata hugs you shoe nicely eliminating any space for cold air to circulate. The fleece lining provides insulation and water repellent treatment provides splash protection keeping your feet drier for longer.A moulded central panel allows for easy ankle flexing while pedalling and a neoprene cuff gives a snug fit around the ankle. Key Features: Warmth and protection for cold weather riding,4 way stretch fabric with durable water repellent finish and fleece backer,Molded central stretch panel allows for easy flexing at the ankle,Neoprene cuff for optimal fit,4° – 14°C / 39° – 57°F,Weight: 117g (Pair).
The overshoe for riders who don’t stick to one discipline. The Castelli Intenso UL Shoecover is the perfect bootie for cool to cold days and has built in adaptability, so it can accommodate your road, mtb, or gravel shoe.Made from GORE-TEX™ INFINIUM™ WINDSTOPPER® fabric the overshoe is highly breathable, letting moisture escape while keeping the heat in. Completely windproof and water-resistant the fabric will protect your feet in a wide variety of conditions, and let you take your mind off the weather and focus on your riding. Neoprene details make the bootie fit perfectly.The bottom of the Intenso has a wide opening that accommodates road shoes, but also the bulkier treads of gravel and mountain bike shoes. A Velcro closure under the sole makes the perfect fit regardless of shoe choice. Durable panels wrap around the lower part for extra durability on those trail sections that demand to be traversed on foot. Key Features: GORE-TEX™ INFINIUM™ WINDSTOPPER® fabric keeps wind out and heat in while being ,highly breathable,Bottom opening accommodates road, gravel or MTB shoes and cleats,Velcro closure under foot for perfect fit,Durable panel wraps around lower part for protection when walking,Neoprene panel at back for perfect fit,0° – 14°C / 32° – 57°F,Weight: 180g (Pair),.
When the temperature is starting to cool and cold winds blow, the Intenso UL Overshoes are there to stop the bite of those colder temperatures from causing discomfort. Warmth is kept firmly inside thanks to the Infinium Windstopper and it’s water-resistant too so can fend off light rain or spray from a damp road. For those of you who ride a bit of everything, you’ll find the strap closure allows compatibility with road or MTB shoes. And with a neoprene back panel, they fit snuggly and securely while allowing unrestricted pedalling.