Your every ride must have The Nova Core windproof vest is made with the 2-layer Tovel Bio Zerowind fabric on the front for great wind protection and Alpha Moon mesh on the bnack for the maximum breathability. It can be easily folded into its back pocket so you can carry it with you during your rides. The system is also used as product packaging, reducing plastic waist. Reflective band on back pockets for extra safety in low visibility.
Your every ride must have The Nova Core windproof vest is made with the 2-layer Tovel Bio Zerowind fabric on the front for great wind protection and Alpha Moon mesh on the bnack for the maximum breathability. It can be easily folded into its back pocket so you can carry it with you during your rides. The system is also used as product packaging, reducing plastic waist. Reflective band on back pockets for extra safety in low visibility.
Using the same names as the original SST gyro cables the Savage Poser uper rotor cable is 265mm-305mm making replacing your gyro cables simple.Key Features:SST sizing,Hardware provided,Choice of colours available.
Schwalbe ProCore Mountain Bike Inner TubeOff road: Riding at lower pressure means better performance ... but at the same time it increases the risk of failures. The limit so far is at about 20 psi, below which it's hardly possible to dare to ride normal MTB tyres.But Nothing Stays the SameIn the future, air pressure can be controlled in the tyre's double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off road performance. In the inner chamber, directly on the rim, there is high air pressure - even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tyre onto the rim. “Burping”, the dreaded loss of air at low pressure in conventional tubeless systems, is impossible.The NameProcore is derived from "Progressive Core". The core (internal high-pressure chamber) progressively absorbs even the hardest impacts.CompatibilityYou can mount Procore with any tubeless compatible MTB tyre. The system is available for all three MTB wheel sizes (26", 27.5", 29"). Weight approx. 200g per wheel. Compatible with all wheels, independent of the brand. Minimum inner rim width: 23mm.Procore is a joint development of Schwalbe and Syntace.Procore - The Outer Chamber: The outer chamber is tubeless. Therefore, any tubeless compatible MTB tyres can be used. The tyre is filled with some liquid sealant (approx. 60ml) and should be at least 57mm (2.25") wide.Procore - The Inner Chamber: Two special Procore components form the inner high-pressure chamber: the special Procore tube and the Procore inner tyre. This "core" is extremely high pressure stable and at the same time very light.The Rim: Of course, the rim must be tubeless compatible and sealed with a tubeless rim band. It should have an inner rim width of at least 23mm. The wider the rim, the easier the installation and the better the performance under low air pressure. The very wide Syntace rims are a perfect fit.The Procore ValveThe patented dual valve of the Procore tube distributes the air into both chambers. The upper part of the valve is a selector. With a simple turn, you select whether air is pumped into the inner or the outer chamber. (Valve sold separately).The Procore Air GuideThe small red component made of white plastic ensures that the air can flow past the inner high-pressure chamber into the outer low pressure chamber.Features: Use: MTB Type: Tyre liner Size: Multiple size options available to select Compatibility: Procore system Includes: Tyre liner onlyTechnologies: - Tyre pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. Even on the roughest terrain tyres “stick” to the ground. - Due to the extra cushioning and traction there is much better steering, braking and traction control. - No more risk of snake bites. The rims are extremely well protected from denting. - Even in the toughest conditions, significantly lighter tyres can be used. - Excellent emergency running characteristics due to the internal high-pressure air chamber.Buy Schwalbe Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Features:Various sizes available,Dual valve to fill both air chambers.
Off-road: Riding at lower pressure means better performance ... but at the same time, it increases the risk of failures. The limit so far is at about 20 psi, below which it’s hardly possible to dare to ride normal MTB tyres. But nothing stays the same: In the future, air pressure can be controlled in the tyre‘s double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off-road performance. In the inner chamber, directly on the rim, there is high air pressure – even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tyre onto the rim. “Burping”, the dreaded loss of air at low pressure in conventional tubeless systems, is impossible. The Name PROCORE is derived from "Progressive Core". The core (internal high-pressure chamber) progressively absorbs even the hardest impacts. Compatibility You can mount Procore with any tubeless compatible MTB tyre. The system is available for all three MTB wheel sizes (26", 27.5", 29"). Weight approx. 200g per wheel. Compatible with all wheels, independent of the brand. Minimum inner rim width: 23mm. PROCORE is a joint development of SCHWALBE and SYNTACE. PROCORE - the outer chamber The outer chamber is tubeless. Therefore, any tubeless compatible MTB tyres can be used. The tyre is filled with some liquid sealant (approx. 60ml) and should be at least 57mm (2.25") wide. PROCORE - the inner chamber Two special Procore components form the inner high-pressure chamber: the special Procore tube and the Procore inner tyre. This "core" is extremely high-pressure stable and at the same time very light. The Rim Of course, the rim must be tubeless compatible and sealed with a tubeless rim band. It should have an inner rim width of at least 23mm. The wider the rim, the easier the installation and the better the performance under low air pressure. The very wide Syntace rims are a perfect fit. The PROCORE Valve The patented dual valve of the Procore tube distributes the air into both chambers. The upper part of the valve is a selector. With a simple turn, you select whether air is pumped into the inner or the outer chamber. (Valve sold separately). The PROCORE Air Guide The small red component made of white plastic ensures that the air can flow past the inner high pressure chamber into the outer low pressure chamber. - Tyre pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. Even on the roughest terrain tyres “stick” to the ground. - Due to the extra cushioning and traction there is much better steering, braking and traction control. - No more risk of snake bites. The rims are extremely well protected from denting. - Even in the toughest conditions, significantly lighter tyres can be used. - Excellent emergency running characteristics due to the internal high-pressure air chamber.
At Smith, it's our REsponsibility to the COmmunity to deliver product with environmental considerations, so we created the Lowdown 2 CORE sunglass frame from recycled post-consumer water bottles. Each Lowdown 2 CORE frame is made with polarized lenses and uses an embossed logo to avoid the use of adhesives. It comes with a microfiber bag made from recycled plastic bottles, and 100% recycled packaging.VisionEvolve polarized bio-based lenses.Fit / IntegrationMedium Fit / Medium Coverage,4 base frame.FrameMade from recycled PET water bottles,5-barrel metal hinges.IncludesMicrofiber bag made from recycled water bottles.
Spank 350 Vibrocore Boost Rear WheelThis MTB rear wheel features a unique profile with low sectional profile and a wide width, which adds radial compliance. This means that you'll enjoy its lateral stiffness and superior traction as you ride across bumps at speed on your mountain bike. Spank has also equipped this Boost spaced rear wheel with Vibrocore technology, which reduces harmful vibrations. This allows you to enjoy a smoother riding experience, while its clever technology increases the rim's longevity.High performance wheel with internal vibration damping, ideal for DH and Freeride.Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness.Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced.Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim.30mm internal width extremely versatile, fitting tyres from 2.0” to 2.6” perfectly, and even allowing + size tyre use, without negative squaring off of tyre profiles.Features: Use: MTB, DH Hole Count: 28 Axle: 12x148mm Boost Type: Rear wheel ERD (mm++) / ETRTO (mm): 27.5": 564 / 584x30.5; 29": 601 / 622x30.5 Rim Dimensions: ID (mm): 30.5 OD (mm): 35 Spokes: J-Hook, tripple butted 2.2/1.8/2.0, brass external nipples Tubeless: Tubeless equipped (tape and valves included) Valve:F/V Presta Configuration: 28H - 3cross lacing Technologies: Vibrocore, Radial Compliance, Torsional Strength, Lateral Stiffness, BeadBite Anti-burp, OohBah Inverted Inner WallBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank 350 Vibrocore Boost XD Rear WheelThis MTB rear wheel features a unique profile with low sectional profile and a wide width, which adds radial compliance. This means that you'll enjoy its lateral stiffness and superior traction as you ride across bumps at speed on your mountain bike. Spank has also equipped this Boost spaced rear wheel with Vibrocore technology, which reduces harmful vibrations. This allows you to enjoy a smoother riding experience, while its clever technology increases the rim's longevity.High performance wheel with internal vibration damping, ideal for DH and Freeride.Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness.Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced.Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim.30mm internal width extremely versatile, fitting tyres from 2.0” to 2.6” perfectly, and even allowing + size tyre use, without negative squaring off of tyre profiles.Features: Use: MTB, DH Hole Count: 28 Axle: 12x148mm Boost Freehub: XD Type: Rear wheel ERD (mm++) / ETRTO (mm): 27.5": 564 / 584x30.5; 29": 601 / 622x30.5 Rim Dimensions: ID (mm): 30.5 OD (mm): 35 Spokes: J-Hook, tripple butted 2.2/1.8/2.0, brass external nipples Tubeless: Tubeless equipped (tape and valves included) Valve:F/V Presta Configuration: 28H - 3cross lacing Technologies: Vibrocore, Radial Compliance, Torsional Strength, Lateral Stiffness, BeadBite Anti-burp, OohBah Inverted Inner WallBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank 350 Vibrocore™ Mountain Bike RimWide, strong but also lightweight, the 350 Vibrocore™ Mountain Bike (MTB) Rim is built to take on the toughest trails and help you to own them. Bringing you excellent stability and control at high speeds, Spank's tough aluminium construction ensures you'll keep rolling efficiently through challenging sections and when taking on huge drops and jumps.Strong and Light Downhill RimWith a unique low-profile height and width, you can trust this stiff and responsive rim for maximum performance as you take to the trails. Ideal for aggressive downhill riding, the Enhanced Vibrocore technology in the rim's inner well keeps your balance stable thanks to its reduction in harmful vibration frequencies over the roughest of terrains. The rim is also equipped with a BeadBite Anti-Burp System that reduces air loss from the tyre and an OohBah Inverted Inner Wall design that prevents twists and bends from riding impact. The 30mm internal width fits tyres from 2.0 to 2.6" as well as plus size tyres, making this trail-ready rim the ultimate choice for downhill and freeriding.Features:Material: High-Performance AluminiumRim Type: ClincherInner Width: 30.5mmOuter Width: 35mmBrake Compatibility: Disc brake onlySpoke Hole Count: 32Valve: PrestaTubeless Compatible: YesUse: Downhill (DH), Enduro, Freeride (FR)Technologies: BeadBite Anti-burp, OohBah Inverted Inner WallWeight: 27.5": 510g; 29": 545g (approx.)Technologies:BeadBite: At an incredible range of pressures, Bead Bite is the solution to keeping your tyres burp free and fixed in place. Bead Bite rim technology enhances tubeless use with tyres of all types and with a greater range of air pressures. Bead Bite rims have 6 rows of tiny ridges that run along the vertical and horizontal faces of the bead seats. These tiny teeth create air seals between the rim and tyre as the bead conforms into them under air pressure. They dramatically increase frictional forces on the tyre bead, reducing the beads' ability to move vertically or horizontally (thus improving tyre stability and reducing burps). The bead becomes trapped between the vertical and horizontal ridges, even at very low air pressures. Even in tubed applications, Bead Bite rims tend to allow much lower air pressures with a reduced risk of pinch flatsOohBah: The unique OohBah profile allows Spank to manufacture thinner walled, wider profiled, lighter rims without sacrificing strength or rigidity. Wider rims mean stiffer wheels and more tyre spread, leading to greater traction and improved comfort, and tyre performance. The "wave" shape of the OohBah inner tube adds strength and support to the vertical rim flange walls and prevent buckling. Normal straight or curved tube wells must be much thicker, and by default heavier, to offer the same supportBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank 350 Vibrocore™ Mountain Bike RimWide, strong but also lightweight, the 350 Vibrocore™ Mountain Bike (MTB) Rim is built to take on the toughest trails and help you to own them. Bringing you excellent stability and control at high speeds, Spank's tough aluminium construction ensures you'll keep rolling efficiently through challenging sections and when taking on huge drops and jumps.Strong and Light Downhill RimWith a unique low-profile height and width, you can trust this stiff and responsive rim for maximum performance as you take to the trails. Ideal for aggressive downhill riding, the Enhanced Vibrocore technology in the rim's inner well keeps your balance stable thanks to its reduction in harmful vibration frequencies over the roughest of terrains. The rim is also equipped with a BeadBite Anti-Burp System that reduces air loss from the tyre and an OohBah Inverted Inner Wall design that prevents twists and bends from riding impact. The 30mm internal width fits tyres from 2.0 to 2.6" as well as plus size tyres, making this trail-ready rim the ultimate choice for downhill and freeriding.Features:Material: High-Performance AluminiumRim Type: ClincherInner Width: 30.5mmOuter Width: 35mmBrake Compatibility: Disc brake onlySpoke Hole Count: 32Valve: PrestaTubeless Compatible: YesUse: Downhill (DH), Enduro, Freeride (FR)Technologies: BeadBite Anti-burp, OohBah Inverted Inner WallWeight: 27.5": 510g; 29": 545g (approx.)Technologies:BeadBite: At an incredible range of pressures, Bead Bite is the solution to keeping your tyres burp free and fixed in place. Bead Bite rim technology enhances tubeless use with tyres of all types and with a greater range of air pressures. Bead Bite rims have 6 rows of tiny ridges that run along the vertical and horizontal faces of the bead seats. These tiny teeth create air seals between the rim and tyre as the bead conforms into them under air pressure. They dramatically increase frictional forces on the tyre bead, reducing the beads' ability to move vertically or horizontally (thus improving tyre stability and reducing burps). The bead becomes trapped between the vertical and horizontal ridges, even at very low air pressures. Even in tubed applications, Bead Bite rims tend to allow much lower air pressures with a reduced risk of pinch flatsOohBah: The unique OohBah profile allows Spank to manufacture thinner walled, wider profiled, lighter rims without sacrificing strength or rigidity. Wider rims mean stiffer wheels and more tyre spread, leading to greater traction and improved comfort, and tyre performance. The "wave" shape of the OohBah inner tube adds strength and support to the vertical rim flange walls and prevent buckling. Normal straight or curved tube wells must be much thicker, and by default heavier, to offer the same supportBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank 350 Vibrocore™ Mountain Bike RimWide, strong but also lightweight, the 350 Vibrocore™ Mountain Bike (MTB) Rim is built to take on the toughest trails and help you to own them. Bringing you excellent stability and control at high speeds, Spank's tough aluminium construction ensures you'll keep rolling efficiently through challenging sections and when taking on huge drops and jumps.Strong and Light Downhill RimWith a unique low-profile height and width, you can trust this stiff and responsive rim for maximum performance as you take to the trails. Ideal for aggressive downhill riding, the Enhanced Vibrocore technology in the rim's inner well keeps your balance stable thanks to its reduction in harmful vibration frequencies over the roughest of terrains. The rim is also equipped with a BeadBite Anti-Burp System that reduces air loss from the tyre and an OohBah Inverted Inner Wall design that prevents twists and bends from riding impact. The 30mm internal width fits tyres from 2.0 to 2.6" as well as plus size tyres, making this trail-ready rim the ultimate choice for downhill and freeriding.Features:Material: High-Performance AluminiumRim Type: ClincherInner Width: 30.5mmOuter Width: 35mmBrake Compatibility: Disc brake onlySpoke Hole Count: 32Valve: PrestaTubeless Compatible: YesUse: Downhill (DH), Enduro, Freeride (FR)Technologies: BeadBite Anti-burp, OohBah Inverted Inner WallWeight: 27.5": 510g; 29": 545g (approx.)Technologies:BeadBite: At an incredible range of pressures, Bead Bite is the solution to keeping your tyres burp free and fixed in place. Bead Bite rim technology enhances tubeless use with tyres of all types and with a greater range of air pressures. Bead Bite rims have 6 rows of tiny ridges that run along the vertical and horizontal faces of the bead seats. These tiny teeth create air seals between the rim and tyre as the bead conforms into them under air pressure. They dramatically increase frictional forces on the tyre bead, reducing the beads' ability to move vertically or horizontally (thus improving tyre stability and reducing burps). The bead becomes trapped between the vertical and horizontal ridges, even at very low air pressures. Even in tubed applications, Bead Bite rims tend to allow much lower air pressures with a reduced risk of pinch flatsOohBah: The unique OohBah profile allows Spank to manufacture thinner walled, wider profiled, lighter rims without sacrificing strength or rigidity. Wider rims mean stiffer wheels and more tyre spread, leading to greater traction and improved comfort, and tyre performance. The "wave" shape of the OohBah inner tube adds strength and support to the vertical rim flange walls and prevent buckling. Normal straight or curved tube wells must be much thicker, and by default heavier, to offer the same supportBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.