When applied to the chain, the carrier quickly "searches" its way in between all the pins and rollers of the chain which is where it is needed the most. At this point when the optimum penetration of the chain has been achieved relative to the amount of lube applied at that time, the carrier evaporates, leaving behind the lubricating element which is enclosed in a thin, dry to the touch film which does not allow loose, dry and lightweight contaminants to stick to it. This results in a cleaner and quieter chain. Directions: For top performance, apply to a degreased chain and dry chain. Un-screw nozzle and pierce security seal. Re-attach nozzle and take care to only open the flow valve a very small amount to avoid over application. Then rest the tip of the nozzle on the rollers of the chain and whilst slowly back pedalling the cranks for 2 complete revolutions, gently squeeze the bottle to apply a thin stream of Chain Juice Dry to the chain. HINT! At this point, if it is dripping on the floor you are applying it too quickly!! Because of the way in which Chain Juice Dry works it is best to apply the lube in 2 - 4 thin layers leaving a few minutes between each layer for the penetration and evaporation process to take place.
This versatile lubricant gives you exceptional drivetrain performance in both wet and dry conditions, keeping your gear shifts smooth, gear set quiet and slows down component wear. All Conditions Chain Lube WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving the overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. Synthetic Lube Ensures Smooth Drivetrain Performance Anywhere As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
This versatile lubricant gives you exceptional drivetrain performance in both wet and dry conditions, keeping your gear shifts smooth, gear set quiet and slows down component wear. All Conditions Chain Lube WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving the overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. Synthetic Lube Ensures Smooth Drivetrain Performance Anywhere As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
Protection from wind and cold. Arm warmers made of stretch material and isolated for cold temperatures. Preshaped for great fitting.Flat seams,Anatomical cut,Elastic gripper on hem,Warm technical stretch fabric,Brushed inside,For cold conditions.
The Muc-Off HCB-1 Harsh Conditions Barrier uses a state-of-the-art, thin film coating to give your Bike long term protection against rust and corrosion.Quick and easy to use, thin non-sticky transparent filmSafe to use on electrical components, paintwork and most rigid plastic trimContains no wax silicon, Teflon (PTFE) or waterDissolves existing rustStrong capillary action enables the product to migrate into cracks and crevicesContains UV application dye to ensure complete protectionResistant to hot, cold and salt-waterIdeal for use in harsh environmentsCreates a self-healing barrier, active for up to 12 months.It will make maintenance and cleaning easier and protect your parts/components.Save you having to replace expensive parts and save you money.300+ hours salt spray to ASTM B-117The Muc-Off HCB-1 Harsh Conditions Barrier is an innovative treatment which drives out moisture, creating a durable anticorrosive all-weather barrier on your bike s frame, chain, metal parts, plastics, and paintwork. This barrier spray has been designed to continually penetrate corrosion, Muc-Off Harsh Conditions Barrier will spread into the tightest micro cracks and seams to remove moisture and salt-water.Muc-Off have also added a UV application dye so you can check that every area you want to protect is treated and the maximum protection is always in place with a UV torch. Suitable for use on bicycles, ebikes and motorcycles.This spray even works on surfaces which have already rusted, simply stopping it in its tracks, removing it altogether Particularly effective in very harsh conditions, our formula is ideal for protecting your two-wheeled toy over the winter months when large amounts of road salts are out on the roads.
Wolf Tooth WT-1 All Conditions Chain Lube - 2ozThe Wolf Tooth WT-1 Chain Lube is a top-quality synthetic lube for use in all riding conditions and is compatible with all chains. This versatile lubricant gives you exceptional drivetrain performance in both wet and dry conditions, keeping your gear shifts smooth, gearset quiet and slows down component wear.All Conditions Chain LubeWT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. Synthetic Lube Ensures Smooth Drivetrain Performance AnywhereAs a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications. Features Cleans, lubricates, and protects chains Peak performance in all conditions Optimal choice for complex modern drivetrains Easy to use Quick to apply Compatible with all chains Also works on other places of your bike, including hubs, cables, and pulley wheelsBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth WT-1 All Conditions Chain Lube - 0.5ozThe Wolf Tooth WT-1 Chain Lube is a top-quality synthetic lube for use in all riding conditions and is compatible with all chains. This versatile lubricant gives you exceptional drivetrain performance in both wet and dry conditions, keeping your gear shifts smooth, gearset quiet and slows down component wear.All Conditions Chain LubeWT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. Synthetic Lube Ensures Smooth Drivetrain Performance AnywhereAs a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications. Features Cleans, lubricates, and protects chains Peak performance in all conditions Optimal choice for complex modern drivetrains Easy to use Quick to apply Compatible with all chains Also works on other places of your bike, including hubs, cables, and pulley wheelsBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Juice Lubes Viking Juice All Conditions Chain LubeOriginally designed with Magnus Backstedt to last the entire Paris -Roubaix race, this high-quality chain lube uses an advanced formula that's suitable for all conditions. Whether you're pedalling in wet or dry weather conditions, this model is specially developed to last longer than conventional lubes, increasing chain life.Designed to survive every crank of the Paris-Roubaix and crowned the “holy grail of Chain Lubes” by Singletrack magazine. Viking Juice is Juice Lubes' longest lasting lube and is built to pillage deep into your chain, conquering dust, rust and shady shifting. The Viking is tough - it'll stay put longer than any of the brand's lubes to guarantee less workshop time, less rust, less missed shifts and a longer lasting chain.Features: High performance synthetic lubricant For long rides in all weather conditions Suitable for on/off road use Extreme pressure additives increase chain life and drive train efficiency Low viscosity for exceptional penetration into all parts of the chain Sets to a dry finish that doesn't attract contaminants Recyclable packagingBuy Juice Lubes Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Juice Lubes Chain Juice Dry Conditions Chain LubeWhether you're hitting the mountain bike (MTB) trails or clocking up the miles on your road bike, this chain lube features a high-tech and long-lasting formula that's ideal for dry to damp conditions. When applied to the chain, the carrier quickly “searches” its way in between all the pins and rollers of the chain which is where it is needed the most. At this point when the optimum penetration of the chain has been achieved relative to the amount of lube applied at that time, the carrier evaporates, leaving behind the lubricating element which is enclosed in a thin, dry to the touch film which does not allow loose, dry and lightweight contaminants to stick to it. This results in a cleaner and quieter chain.Dry Conditions Chain LubeJuice Lubes Chain Juice Dry guarantees crisp and silent shifts, no sticky gunk and tough-as-nails protection for your components. Chain Juice Dry is built with an Ethanol-based carrier that's super effective at penetrating the depths of your chain, then evaporating to leave a dry and natural wax barrier. It's reinforced with tough, long-lasting, synthetic additives that reduce noise and wear. It's also kind on the environment. Dry is designed to limit droplets from flicking when you're spinning away and is fully biodegradable to break down quickly and harmlessly.Ideal for MTB, road, gravel, commuter bikes and will stand up to big mileage with a single application.Features: Suitable for on/off road use Excels in dry or dusty conditions Sets up dry so not to attract dust and contaminants Extreme pressure additives increase chain life and drive train efficiency Biodegradable formula Recyclable packagingBuy Juice Lubes Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Juice Lubes Chain Juice Wet Conditions Chain LubeSpecifically designed for riders who brave the harshest of wet conditions, this chain lube keeps rust and shady shifting at bay. Whether you're tackling long distance wet rides or exploring in muddy terrain conditions, this model stays firmly in place on your chain.Wet Conditions Chain LubeThe formulation of Chain Juice Wet (and all other Juice Lubes chain oils) includes extreme pressure additives that allow it to keep lubricating even under extreme loads. To keep the chain running smoothly, the lubricant has to maintain its structural integrity on a molecular level when being crushed between the pins and plates due to the pulling force you are exerting by turning the cranks. This is a very small area of actual contact and will see very high levels of pressure. The final ingredients in the mix are rust and corrosion inhibitors, an anti fling additive and waterproofing to keep it all in place. Don't be fooled that Chain Juice Wet is like any old thick, wet lube just because it seems a similar consistency or colour, it's not! As with all Juice Lubes products the devil is in the details, which in Juice Lubes' case are the quality of the additives and base oils that the brand uses.Chain Juice Wet is tough as old boots and built to keep your shifting smooth under the heaviest of loads. It stays put through the grimiest of gloop and keeps your gears crisp, smooth, silent and rust free. It's waterproof, it's anti-rust and it won't fling off when you're hurtling at top speed down your favourite hillside.Features: Extremely durable, giving long distance performance in adverse conditions Outstanding water tolerance and corrosion protection Excels in wet and muddy riding conditions Suitable for on/off road use Recyclable packagingBuy Juice Lubes Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth WT-1 All Conditions Chain Lube is a premium synthetic drivetrain lubricant that lubricates, cleans and protects your bike chain, whether road, gravel or MTB.Designed for optimal drivetrain efficiency in all riding conditions, the Wolf Tooth WT-1 chain lube does away with the need for separate dry chain lube, wet chain lube, chain cleaner and drivetrain treatment – leaving you with a clean, silent and efficient chain.As well as improving the overall mechanical efficiency of your drivetrain, WT-1’s synthetic formula binds so well to your chain that it’ll last three to five times longer than most other chain lubes – giving up to 400 miles between applications.As a drivetrain treatment, WT-1 will push dirt and debris to the surface of the chain, where it can be easily wiped away, leaving long-lasting protection. In fact, after the first few rides using WT-1 chain lube, you’ll see it working as the detergent-like additive gets deep into the chain to displace the grime. Wipe down, reapply and the more you ride, the cleaner and smoother your chain will get.WT-1 can also be used on other moving pieces of the bike, including pulley wheels, hubs, cables, and more. Be sure to wipe away any excess chain lube after applying to other areas of your bike.Key FeaturesCleans, lubricates, and protects chains,Peak performance in all conditions,Optimal choice for complex modern drivetrains,Available in 2.0fl oz (59ml) and 0.5fl oz (15ml) bottles,Easy to use; application takes about 10 minutes,Also works on other places of your bike, including hubs, cables, and pulley wheels.Application ProcessEase of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes about 10 minutes and there is no need to clean your chain before getting started.Here’s how to begin using WT-1 Chain Lube:Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.,Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.,Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.,Wait 5-10 minutes. Pretty simple.,Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.,Ride your bike. Reapply at least once every 400 miles.,
Muc-Off Harsh Conditions Barrier uses a state-of-the-art, thin film coating to give your bike long term protection against rust and corrosion. It even works on surfaces that already have rust… it simply stops rust in its tracks, removing it altogether! Particularly effective in very harsh conditions, our formula is ideal for protecting your two-wheeled toy over the winter months when large amounts of road salts are out on the roads.The innovative new treatment drives out moisture, creating a durable anticorrosive all-weather barrier on your bike’s frame, chain, metal parts, plastics, and paintwork. Designed to continually penetrate corrosion, Muc-Off HarshConditions Barrier will spread into the tightest micro cracks and seams to remove moisture and salt-water. We’ve also added a UV application dye so you can check that every area you want to protect is treated and themaximum protection is always in place with a UV torch. Suitable for use on bicycles, ebikes and motorcycles.