Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability. The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation). This test is far more gruelling to the current industry standard, the EN14781. The new classic two has 400 mm² surface area which is almost 40% more than the competition. The significance of this is the load is spread around the cleat rather than having a small concentrated area, which improves comfort and reduced foot discomfort.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Clip on mudguards are the perfect option if your frame or fork does not have mudguard eyelets. They are quick and easy to fit and remove. LifeLine Narrow Road Clip-On Mudguard Set features a PET/Aluminium construction making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. The LifeLine Narrow Road Mudguard Set is compatible with calliper or disc brakes and comes complete with full installation instructions and all mounting hardware.
A classic dirt board design, the LifeLine MTB Clip-On Rear Mudguard fixes quickly and easily to your seatpost to provide protection from muck and spray from the rear tyre. A selection of shims allow the LifeLine MTB Clip-On Rear Mudguard to fit a variety of seatpost diameters from 25.4mm to 31.8mm. A thumb wheel adjuster allows for easy angle adjustment on the fly.
Clip-On Kit fits 3T dropbars in the TEAM and PRO ranges, providing really rigid support for your choice of Extension. 3T Extension Bars are available separately and come in three shapes, plus, new for this year, a Christian Vande Velde Signature edition. Clip-On Kit can also be used on other brands of bar that are certified safe with clip-ons. (Note: they must not be used on any 3T LTD bar.)
Lightweight, slimline and offering all-round mud control, this mudguard set is easy to mount and fits on virtually all bikes. It comfortably fits any bike with a seatpost diameter between 24mm and 32mm. This makes it great for use on hybrid and trekking bikes, as well as mountain bikes.
Every aspect of the Zero Aero pedal design has been painstakingly tailored to boost speed by minimising wind drag. Developed specifically for Time Trials and Triathlons where every second counts, the Zero Aero Pedal System provides more speed with the same power. Aerodynamic Due to its aerodynamic advantage, the Zero Aero Pedal System was chosen by Bradley Wiggins to set the UCI World Hour Record of 54.526 km on June 7, 2015, at the Lee Valley Olympic Velodrome in London. The average speed of the historic ride was 33.88 mph. Considered the holy grail of cycling achievements, the Hour Record is an honour earned by the cyclist who covers the greatest distance in kilometers in one hour. Large, stable cycling platform The Zero Aero Pedal System provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged. Quality without compromise Zero Aero pedals use precision cartridge and needle bearings - three of them instead of two found in most other pedals - which allows the Zero Aero to be thinner for a lower stack height, better cornering clearance, and reduced aerodynamic drag. Like all Speedplay Pedal Systems, the locking edges of Zero Aero pedals and cleats are metal-on-metal for durability and safety, unlike their competitors who use engagement edges made of plastic. Foot adjustments No other pedal system offers the precise adjustment or convenience of independently adjustable fore-aft, side-to-side, and rotational foot positions. Unlike the inexact set-up of traditional cleats, each of the three critical foot-axis adjustments of Zero Aero Walkable™ Cleats can be set or changed without affecting the position of the other two adjustments. This feature also eliminates guesswork and misalignment when replacing cleats.
Turn your road bike into a refined time-fighting machine. Deda Carbon Blast bars are made from a strong and lightweight carbon monocoque with an integrated extension and arm-rest plate for a truly aerodynamic and ergonomic riding position.
Every aspect of the Zero Aero pedal design has been painstakingly tailored to boost speed by minimising wind drag. Developed specifically for Time Trials and Triathlons where every second counts, the Zero Aero Pedal System provides more speed with the same power. Aerodynamic Due to its aerodynamic advantage, the Zero Aero Pedal System was chosen by Bradley Wiggins to set the UCI World Hour Record of 54.526 km on June 7, 2015, at the Lee Valley Olympic Velodrome in London. The average speed of the historic ride was 33.88 mph. Considered the holy grail of cycling achievements, the Hour Record is an honour earned by the cyclist who covers the greatest distance in kilometers in one hour. Large, stable cycling platform The Zero Aero Pedal System provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged. Quality without compromise Zero Aero pedals use precision cartridge and needle bearings - three of them instead of two found in most other pedals - which allows the Zero Aero to be thinner for a lower stack height, better cornering clearance, and reduced aerodynamic drag. Like all Speedplay Pedal Systems, the locking edges of Zero Aero pedals and cleats are metal-on-metal for durability and safety, unlike their competitors who use engagement edges made of plastic. Foot adjustments No other pedal system offers the precise adjustment or convenience of independently adjustable fore-aft, side-to-side, and rotational foot positions. Unlike the inexact set-up of traditional cleats, each of the three critical foot-axis adjustments of Zero Aero Walkable™ Cleats can be set or changed without affecting the position of the other two adjustments. This feature also eliminates guesswork and misalignment when replacing cleats.
They are made from 7003 T6 alloy and feature Uno extensions (J-bend). Pads also included.
Made with an aluminium 6061 Silver Body and featuring a black cage, it gives an excellent hold as you pedal for the podium.