The worlds first wearable folding lock is here. Designed to be fast and easy to use with rust free components. Sold Secure Silver standard.Key Features:Just 18.9cm in length and 6cm wide with an 85cm circumference when locked,Super lightweight at just 1kg,Hardened Steel Links,Ultra Protected Rivets - Designed to withstand sawing and cutting,Anti-Drilling Cylinder,Rattle Elimination System prevents lock from shaking while riding,.
crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of riding remove the pedal body from the spindle and wipe it clean of any dirty grease apply fresh grease to the inside of the pedal before re-installing the spindle Pedal features: Excellent mud-shedding: the design is very open 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rid Fit adjustment: crank brothers premium cleats can be adjusted for 10° release Customise the fit between your shoe and the pedal by using tread contact sleeves Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in part When servicing this pedal, use the rebuild kit designed for level 1 & 2 pedals
The end of each mudguard extends to below the hub axles. This length ensures a full coverage, meaning you, and also the cyclist behind you, are spared from splashing. They can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Once the metal mounting brackets are fitted to the bicycle the mudguards can be clipped on and off in seconds making them ideal in case of need. Brackets attach at brake bolts and skewers.
The Raceblade Pro Stealth Series Mudguard system is also compatible with aero forks and bikes with disc brakes, direct mount brakes and thru axles.
BB30 service kit with 2 clips and 2 6806 angular contact Enduro bearings
Leatt DBX 4.0 Clipless ShoesClip-in and go tear up your favourite mountain bike trails with the superb comfort and pedalling efficiency of the Leatt DBX 4.0 Clipless Shoes. The rugged build is also tuned to take on the rigours of all your MTB riding adventures.For gravity riders who prefer the feel and security of clipping into the pedals, the DBX 4.0 Clipless Shoes are for you. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 4.0s are also built tough. Made from synthetic leather, they can take the daily use and abuse of mountain biking and still come out smiling. The water-resistant upper and weatherproof tongue also let you take on wet and muddy trails with ease. It's easy to clean too - bonus. With reinforced toe, heel and Achilles you'll avoid bumps and bruises from debris kicked up off the trail while the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. What more could you want when ripping MTB trails?Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Cross-tension straps for pedal efficiency and weather protectionUpper: Synthetic Leather - Water-resistant and easy to cleanTongue: Low-profile, padded and weather-resistantProtection: Inner ankle mid-height protectionReinforcements in toe, heel and AchillesBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 4.0 Clipless ShoesClip-in and go tear up your favourite mountain bike trails with the superb comfort and pedalling efficiency of the Leatt DBX 4.0 Clipless Shoes. The rugged build is also tuned to take on the rigours of all your MTB riding adventures.For gravity riders who prefer the feel and security of clipping into the pedals, the DBX 4.0 Clipless Shoes are for you. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing. The DBX 4.0s are also built tough. Made from synthetic leather, they can take the daily use and abuse of mountain biking and still come out smiling. The water-resistant upper and weatherproof tongue also let you take on wet and muddy trails with ease. It's easy to clean too - bonus. With reinforced toe, heel and Achilles you'll avoid bumps and bruises from debris kicked up off the trail while the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. What more could you want when ripping MTB trails?Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:ClipGrip Sole: Unique extended SPD channel adjustable for Gravity RidingOptimized grip pattern in pedal areaGrippy heel and toe siping with mud-flow channelsRideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfacesMid Sole: Mono-directional flex - Rigid on pedals, flexible in toe areaUpper: Cross-tension straps for pedal efficiency and weather protectionUpper: Synthetic Leather - Water-resistant and easy to cleanTongue: Low-profile, padded and weather-resistantProtection: Inner ankle mid-height protectionReinforcements in toe, heel and AchillesBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
If you prefer to get clipped in and ride, then the DBX 4.0 Clipless Shoes are for you. They've been built from the ground up to deliver tough but comfortable mountain bike performance. The DBX 4.0s start with great pedalling efficiency. A rigid pedal section getting the power down easily. Next, the ClipGrip Sole gives you extended cleat adjustment; set your cleats further forward for pedalling performance or further back for gravity-fed riding. Simple. If you're not quite clipped in, don't fret either, the super-sticky RideGrip Compound and optimized grip pattern grip your pedals tenaciously until you can find your clip-in point. When you're off the bike and pushing then the flexible toe won't let you slip and mud-flow channels in the heel keep your shoes free of clag and sure-footed on any terrain. The upper of the 4.0s are made from durable synthetic leather, making them easily tough enough for all your mountain bike escapades. Not only is it tough but it's supple too, for superb comfort. If you're riding muddy trails you'll be pleased to know the upper is water-resistant and it's easy to clean too. Leatt have given you copious protection too, with reinforced toe, heel and Achilles sections. And the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptionally, modern and performance orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand this pedal design usage further, it has fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride.
Engineered for every riding situation, these fantastic components are equipped with a dual-sided design. On one side you'll benefit from a flat pedal with an elastomer grip for safe riding in all-weather conditions. Look has also given the other side an SPD-compatible mechanism for clipping-in when you're heading out on a faster run. Whether you're commuting to work or planning a long-distance adventure over the weekend, these are an excellent choice of upgrade for confident urban rides.
Ready for racing, this aerobar features a robust aluminium construction, which means that you'll benefit from its fantastic stiffness and cost-effectiveness. Prime has also equipped it with an ergonomic and anatomical design, which gives every rider a natural position, without sacrificing aerodynamics. Kitted out with a bridge that connects its extensions together, this version offers riders increased hand comfort alongside its arm pads. Weighing in at only 407g, this is a perfect choice of upgrade for riders who want superior control without any excess weight.