Combining a carbon body with a titanium axle, each of these cleat-ready pedals provide a sturdy base for heavy-duty, varied terrain riding. Built to resist impact from rocks and dirt thrown up from the trail floor, these lightweight and smooth-spinning platforms have a specially designed shape and build to ensure the best power-to-weight ratio possible. Suited to the rigours of XC racing, this is the perfect pair for fast-paced and thrilling riding.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptionally, modern and performance orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand this pedal design usage further, it has fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride.
The Women's PRR Strada Bib Shorts feature a host of Ale's fabric technologies and have an ergonomic fit that sits perfectly when in a riding position. The frontal panel features Ale's Eyelet carbon fabric, designed to dissipate electrostatic charges; this helps improve blood flow and maintain a stable temperature. Then you'll find side panels use a polyester fabric, with a controlled elasticity, to give compressive muscle support and total freedom of movement. To the upper body, the bibs are high stretch and again tailored to fit perfectly when in a riding position, so much so you'll barely notice them there when riding. The LG Stability System at the leg ends features a deep elastic leg band with silicon woven in the structure that keeps the legs in place and distributes pressure on the leg firmly and evenly, without any fear of bulging. Lastly, Ale's W4H chamois seat is constructed from an elastic micro-fibre, specifically shaped for women, with padding strategically positioned in the contact points to avoid stress on nerve endings. For the best comfort and support, padding density is calibrated for unbeatable comfort; high density 90 kg/cm2 padding is used where it's most needed. The lateral shaped wings are flexible and follow the movements of the pedalling female form, adapting to the anatomy for optimum comfort. This pad gives the very best combination of comfort, wicking, breathability and is also incredibly fast drying to ensure the utmost protection against shocks and stresses of the road. Seen on pro riders, Gran Fondo devotees and your local club-run, the Ale Graphics PRR shorts have a justified reputation for incredible comfort and beautiful fit. Try them yourself and we think you'll soon discover why they're so well-loved the world over.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptional, modern and performance-orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand the usage of the Look X-Track pedals further, they have fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride. Please Note: These pedals come with Look SPD-style cleats to install onto your SPD-compatible cycling shoes. However, if you wish to use them with shoes that have Shimano SPD cleats installed they will be compatible with these too.
Whether you're riding for the fun of it or pushing for the top spot on the podium, the Look Keo 2 Max Carbon pedals give you the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Alternative Cleat Float Options: Black Cleats: 0 degrees; Red Cleats: 9 degrees (both alternative versions sold separately)
Offering exceptional value for money the MET Grancorso Helmet offers unrivalled performance and aerodynamics with an extra level of coverage to that of rival road cycling lids. Fitted with an extended outer shell it provides added safety and the rigid visor ensures you benefit from a racer look for those that love to pedal fast. Extremely versatile, the Grancorso welcomes a retro aesthetic and its reflective strap anchors at the side and rear make travelling through the city at night a breeze. Keeping you visible to the public, the straps can work in tandem with a rear LED light (not supplied) that attaches to your fit-adjustment dial and a reflective wrap-around panel, black during the day, is illuminated at night when caught in the glare of vehicle headlights. To keep your head protected at all times there is an in-mould polycarbonate shell with an EPS liner, while the hand washable padding ensures you can stay fresh after hot summer commutes to the office.
The value of the LifeLine Front Mudguard is incredible. At a low cost, the amount of protection to yourself and your bike makes cleaning a whole lot easier.
Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability. The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation). This test is far more gruelling to the current industry standard, the EN14781. The new classic two has 400 mm² surface area which is almost 40% more than the competition. The significance of this is the load is spread around the cleat rather than having a small concentrated area, which improves comfort and reduced foot discomfort.
The Tufo Calibra Lite is a lightweight tyre designed for Time Trial use & racing when dry & on good smooth road surfaces. In spite of super low weight, this tyre has good puncture resistance & the slick tread contributes to low rolling resistance.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
The DeFeet Wool Line Wool is a staple of the DeFeet line. DeFeet source the highest grade wools on the planet. Combined with DeFeet construction the result is the finest wool sock that you can buy. The DeFeet wool line is continually growing. Wool has attributes that can't be found in other fibres. DeFeet wool socks stay cooler in the heat because of the construction of the mesh. They stay warmer when they are wet and in cooler temperatures because of the amazing thermal properties of the fabric. The Woolie Boolie could be easily described as a mid-weight sock, which is roughly twice the thickness of the Aireator. Like all Defeet wool socks, it's made of superior quality Merino Wool. Merino wool breathes better than just about any other wool out there. Being a natural fibre, wool has intrinsic wicking capabilities understood only by sheep and wearers of DeFeet wool socks. Let's just say you have to wear them to understand. These socks are also versatile; keeping you warm in the chilly Winter and cool during the heat of Summer.