Zipp's Vuka Clip Risers are designed for use with the Vuka Alumina Clip s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. Each size of risers is sold separately in packs of two. Risers cannot be stacked.
Zipp's Vuka Clip Risers are designed for use with the Vuka Alumina Clip s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. Each size of risers is sold separately in packs of two. Risers cannot be stacked.
Zipp s 303 Firecrest Tubeless Disc-brake wheel is designed for the real world a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It s faster, lighter, and more capable over varied terrain, whether the surface is pavement in all its conditions or no pavement at all. New Zipp graphics and cosmetic identity that scream speedVersatile endurance wheel for the modern road bike with tubeless and hookless rim profileLighter Weight than its predecessor, making it nimble and fast.Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre.Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the roadNew 40mm rim depth makes a light and aero wheel in every situationNew ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagementShips with 12mm front and rear end capsCentre locking rotor interface. Lock ring is included with the wheelsXDR or SRAM/Shimano driver bodiesCampagnolo driver body sold separatelyDeeply rooted in Zipp s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hub, the German-engineered ZR1 DB. This hub features 66 points of engagement for quicker response. The 303 Firecrest Tubeless Disc-brake wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 40mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Disc BrakeDriver body type: SRAM/Shimano Road or SRAM XDRColor (hub): BlackAxle type (Wheels): TA 12x142Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tire pressure: 73psiMax recommended rider weight: 250lbsPart Weight (g): 739Please Note: The below tyre brands have communicated to us that their tubeless models are compatible with our tubeless hookless straight side wheels. Riders wishing to use regular clincher tyres should check with the manufacturer if they are compatible with hookless rims. This is a guide and we still recommend consumers confirm compliance with their chosen tyre manufacturer: Zipp - Tangente Speed RT25, R28, and the Tangente Course G40 gravel tyreSchwalbe Rene Herse
Zipp s 303 Firecrest Tubeless rim-brake wheels are an all-around wheel for a new era of road riding. It s rich in heritage yet loaded with innovations. It s as adept in the mountains as it is on rolling hills, windswept farm lanes, or ferocious field sprints. New Zipp graphics and cosmetic identity that scream speedNew ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagementBuilt with Sapim CX Sprint J-bend spokesTubeless ensuring secure performance even when ridden at lower tyre pressuresVersatile 45mm rim profile that s fast, stable and versatileABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheelShowstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditionsXDR or SRAM/Shimano driver bodiesShips with QR end caps, quick release skewersCampagnolo driver body sold separatelyAt Zipp, they never rest on laurels. These wheels feature a 19mm internal width and is tubeless ready. That means you can run lower tyre pressure for greater cornering grip and compliance with reduced rolling resistance without the risk the pinch flats. When it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. It s lightweight with ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level NSW wheel line up. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance . Zipp s ShowStopper textured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the centre of the 303 Firecrest Tubeless rim-brake is a new versatile and durable hub, the German-engineered ZR1.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 45mmSurface texture: ABLC DimplesBrake compatibility: RimRim - inside width: 19mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Rim BrakeDriver body type: SRAM/Shimano RoadColor (hub): BlackAxle type (Wheels): QR 135Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tire pressure: 125psiMax recommended rider weight: 250lbsPart Weight (g): 842
Zipp s 303 Firecrest Tubeless rim-brake wheels are an all-around wheel for a new era of road riding. It s rich in heritage yet loaded with innovations. It s as adept in the mountains as it is on rolling hills, windswept farm lanes, or ferocious field sprints. New Zipp graphics and cosmetic identity that scream speedNew ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagementBuilt with Sapim CX Sprint J-bend spokesTubeless ensuring secure performance even when ridden at lower tyre pressuresVersatile 45mm rim profile that s fast, stable and versatileABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheelShowstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditionsXDR or SRAM/Shimano driver bodiesShips with QR end caps, quick release skewersCampagnolo driver body sold separatelyAt Zipp, they never rest on laurels. These wheels feature a 19mm internal width and is tubeless ready. That means you can run lower tyre pressure for greater cornering grip and compliance with reduced rolling resistance without the risk the pinch flats. When it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. It s lightweight with ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level NSW wheel line up. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance . Zipp s ShowStopper textured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the centre of the 303 Firecrest Tubeless rim-brake is a new versatile and durable hub, the German-engineered ZR1.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 45mmSurface texture: ABLC DimplesBrake compatibility: RimRim - inside width: 19mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Rim BrakeDriver body type: SRAM/Shimano RoadColor (hub): BlackAxle type (Wheels): QR 135Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tire pressure: 125psiMax recommended rider weight: 250lbsPart Weight (g): 842
Zipp s 353 NSW Tubeless Disc-brake wheelset is the pinnacle of our pursuit of versatility and speed. This wheelset fuses Zipp s two most advanced approaches, Sawtooth rim profile and Total System Efficiency for an all-encompassing approach to performance. Zipp's lightest tubeless ready wheelset yet at just 1255g per pairSawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth25mm internal width and tubeless compatibility for optimization of wider tyres with lower tyre pressureCognition DB hub set with Axial Clutch freehub rolls efficientlySuitable for 100x12mm (front) and 142x12mm (rear) axles - sold individually as front or rear wheelsWith its undulating 45-mm deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp s lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. With Zipp s hookless rims, the transition between the tire and the rim is more seamless and aero. Zipp s hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp s 353 NSW s Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially the steep, punchy stuff. The 353 NSW utilizes Zipp s Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheelset s 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the centre of the 353 NSW is the Cognition V2 Hubset re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction as well as improved durability.
Zipp s 353 NSW Tubeless Disc-brake wheelset is the pinnacle of our pursuit of versatility and speed. This wheelset fuses Zipp s two most advanced approaches, Sawtooth rim profile and Total System Efficiency for an all-encompassing approach to performance. Zipp's lightest tubeless ready wheelset yet at just 1255g per pairSawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth25mm internal width and tubeless compatibility for optimization of wider tyres with lower tyre pressureCognition DB hub set with Axial Clutch freehub rolls efficientlySuitable for 100x12mm (front) and 142x12mm (rear) axles - sold individually as front or rear wheelsWith its undulating 45-mm deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp s lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. With Zipp s hookless rims, the transition between the tire and the rim is more seamless and aero. Zipp s hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp s 353 NSW s Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially the steep, punchy stuff. The 353 NSW utilizes Zipp s Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheelset s 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the centre of the 353 NSW is the Cognition V2 Hubset re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction as well as improved durability.
Zipp s 353 NSW Tubeless Disc-brake wheelset is the pinnacle of our pursuit of versatility and speed. This wheelset fuses Zipp s two most advanced approaches, Sawtooth rim profile and Total System Efficiency for an all-encompassing approach to performance. Zipp's lightest tubeless ready wheelset yet at just 1255g per pairSawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth25mm internal width and tubeless compatibility for optimization of wider tyres with lower tyre pressureCognition DB hub set with Axial Clutch freehub rolls efficientlySuitable for 100x12mm (front) and 142x12mm (rear) axles - sold individually as front or rear wheelsWith its undulating 45-mm deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp s lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. With Zipp s hookless rims, the transition between the tire and the rim is more seamless and aero. Zipp s hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp s 353 NSW s Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially the steep, punchy stuff. The 353 NSW utilizes Zipp s Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheelset s 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the centre of the 353 NSW is the Cognition V2 Hubset re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction as well as improved durability.
Zipp's Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip’s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero cockpit system.
Redesigned to be easier to set up and adjust. The VukaClip is available with an below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market. The VukaClip is not sold separately. Available with Vuka Alumina Evo 110 extension, Vuka Alumina Evo 70 extension, Vuka Alumina Race extension, Vuka Carbon Evo 110 extension, Vuka Carbon Evo 70 extension, Vuka Carbon Evo 110 extension and Vuka Carbon Race extension.
Zipp 303 Firecrest Front Clincher Disc WheelTake out any terrain with confidence with the 303 Firecrest V1 Carbon Clincher DB Front Wheel from Zipp. Their carbon design is enormously durable and reliable, while Firecrest technology within the rims adds greater aero performance and sprinting stiffness in the face of intense crosswinds. Zipp’s wheels are also surprisingly lightweight, which means they’re enormously responsive and precise in their handling, fast in their acceleration and ideal for handling trickier downhill sections.Quick-release skewers mean more leverage for opening and closing, a wide brake track delivers improved braking performance and the clincher tyre keeps a stable shape without reducing rolling resistance. This is your chance to truly become one with the trail thanks to Zipp.Features:The Zipp 303 Firecrest disc brake wheel is durable, lightweight and stiff, whilst also providing the consistent and powerful performance of disc brakingDisc brake (6-bolt) specific for superior braking in all weathersLight, aero design45mm deep for class leading aerodynamicsZipp 77D disc specific hub on a carbon clincher rimFirecrest Rim Technology provides world class handling and stabilityAero performance, sprinting stiffness, stable in the crosswinds and lightweightEngineered for the Classics yet, ready for anythingThru-axle compatibleRim material: carbonRim type: clincherRim depth: 45mmRim width: 28.5mmHub (disc specific - 6-bolt): Zipp 77DSpoke count: 24Spokes: CX-Ray, blackBearings: cartridge, stainless steelMax rider weight: 250IbsMax tyre pressure: 125psiBuy Zipp Wheels from Chain Reaction Cycles, the World's Largest Online Bike Store.
Specification:Material (HB): AL-6066,Bar clamp diameter: 31.8mm,Extension clamp diam: 22.2mm,Shifter fitment: Plug Style,Length: n/a,Internal cable routing: Yes.