The stages power l for shimano grx rx810 is built onto the non-drive side of a shimano grx rx810 crank arm and is compatible with all frames that fit shimano grx rx810 cranks. Specifications: Stages power accuracy: ±1.5% (compares with generation 2.0 accuracy: ± 2%), Weight: only adds 15gr to base crank arm, Battery life: 200+ hours (coin cell: cr2032), Power range (watts): 0 to 2500, Cadence range (rpm): 20-220, Water resistance rating: ipx7, Frame compatibility: most frames, see fit guide in our support section, Device compatibility: ant+, bluetooth smart ready, Software compatibility: stages link, training peaks, strava, garmin training center and others,. Additional Features: Active temperature compensation, Accelerometer based cadence measurement, Tool free battery replacement,Lifetime access to stages link for power meter management and firmware upgrade,.
The spindles are manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter to be used with Sram BB30 road and Sram BB30 mountain bike (168mm Q-factor) drive side cranks as well as Race Face Next SL cranks. The Stages Power BB spindles are specifically designed to meet or exceed the performance of the manufacturer’s stock component, while allowing the retrofit of the new Stages Power Carbon to a rider’s SRAM or Race Face drivetrain.
The Stages Power L meter paired with FSA's SL-K Light BB30 left crank arm. Please note that the SL-K Light BB30 version has across the board compatibility with FSA and Vision BB30 models.The new Stages Power meter is slimmer, and up to 28-percent lower profile than our original meter. It's sleeker by way of a 17-percent reduction in frontal area, and we've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200-percent over the previous design.SPECIFICATIONS:Stages Power L Accuracy: ± 1.5% (Compared with Generation 2 Accuracy: ± 2%),Power Meter Housing: new low profile design, with new door interface,Weight: Only adds 20g to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The power meter tech behind seven Grand Tour wins is now available for Cannondale’s latest HollowGram Si cranks, helping you unlock your true potential as a rider, whether you’re flying up mountain passes, testing your limits on gravel or going full send on the trails.The power meter tech behind seven Grand Tour wins is now available for Cannondale’s latest HollowGram Si cranks, helping you unlock your true potential as a rider, whether you’re flying up mountain passes, testing your limits on gravel or going full send on the trails.Stages Power has carried riders to five Tour de France victories plus wins in the Giro and Vuelta along with many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.ATC – Active Temperature CompensationThe consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is a key reason riders trust data from Stages Power no matter how much the day warms or temperatures plummet as you crest an Alpine peak.Individual Calibration For The Most Reliable ResultsEach Stages Power meter is assembled in Stages’ own state-of-the-art facility in Colorado, USA. Here every single unit is calibrated individually to ensure a +/- 1,5% accuracy level – an industry best for non-scientific power meters.SPECIFICATIONSStages Power L Accuracy: ± 1.5% (compared with Generation 2 Accuracy: ± 2%),Weight: Only less than 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURESTool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The Stages Power L meter is built to the proprietary Stages Power carbon left crank arm. The full carbon fiber Stages Power meter and crank arm is compatible with many SRAM GXP or BB30 cranks.The new Stages Power meter is slimmer, and up to 28-percent lower profile than our original meter. It's sleeker by way of a 17-percent reduction in frontal area, and we've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200-percent over the previous design.Specifications:Stages Power L Accuracy: ± 1.5% (Compared with Generation 2 Accuracy: ± 2%),Power Meter Housing: New low profile design, with new door interface,Weight: Only adds 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power Range (Watts): 0 to 2500,Cadence Range (rpm): 20-220,Water Resistance Rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others,Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The Stages SB20 Smart Bike Handlebar Tape is a textured urethane bar tape which provides padding and grip for your indoor trainer’s bars. Long-lasting material resists wear and saturation from sweat. Includes two rolls for use with standard road bars. End plugs included.Key FeaturesUrethane bar tape,Long-lasting material,Includes two rolls,End plugs included.
Stages Power LR for Shimano Ultegra R8000 is a dual-sided power meter for those who desire bilateral measurement.SPECIFICATIONS:Accuracy: ± 1.5%,Weight: Only less than 35gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Stages Link, Today's Plan, Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The new single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9200 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
The Ultegra R800 Stages Power meter fits all styles of R800 crankset, including: compact and standard. Riders looking to add power to their existing crank need only to match the crank length of their existing Ultegra R800 crankSPECIFICATIONS:Stages Power L Accuracy: ± 1.5% (compared with Generation 2 Accuracy: ± 2%),Weight: Only adds 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 to 2500,Cadence range (rpm): 20-220,Frame Compatibility: Most frames, see fit guide in our Support section,Crank Compatibility: All Shimano Hollowtech II road cranks,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
A heavy duty mat for a sturdy, heavy duty bike. This high density rubber mat is 72" long and 36" wide, and will stand the test of time under your SB20. It's water resistant and anti-slip to keep your pain cave in top condition.
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
Our fantastic I'd Rather Be Cycling Men's T-Shirt is the latest addition to your wardrobe, an exclusive product from our site. Printed by industry experts, it captures the eye with a prominent graphic on a stylish T-shirt.(We take pride in our use of ethical sources, so any concerns that you may have can be put to rest.) 100% cotton teeThis product is approved for use with washing machinesPlease refer to the label before tumble-dryingMedium-thickness materialAdditionally, our measurements make considerations for different bodies, both male and female. If you have a preference for looser-fitting clothing, please order a larger size.