Key Features:Alloy pedal,Includes toe straps,9/16" axle.
Designed to fit any fork, RapidRacerProducts has developed the EnduroGuard to work effectively with short-travel XC and 4X forks (80mm to 120mm travel). The 'T' shape clamping points on the arms are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer increased protection for higher speeds without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The holes for the fork brace aren't ideally located when using it as a rear mudguard, so these guards have two snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays, this feature creates more mud / tyre clearance and a much better fit.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
RapidRacerProducts NeoGuard Front Mudguard Introducing the new neoprene mudguard called “NeoGuard”; this is an innovative solution to prevent you getting mud in your face when out riding. Traditional mud guards are ugly and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down.The NeoGuard (Patent Pending) is a handy and effective solution to this problem. It throws the mud off every time the fork compresses keeping your bike light and agile. It is simple to fit and very lightweight, this mudguard is perfect for both downhill or cross-country and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you'll never get caught out again. The NeoGuard has been fitted on all the forks listed below; however it is likely to fit many others.Features: Extra Small (18g) Marzocchi Corsa Marzocchi MX Pro Lo (80-100mm) RockShox Reba RockShox Recon RockShox Argyle RockShox Tura (100mm)* * Fox Forx Float 32 (130mm)* Fox Forx F100 Fox Forx F120 Small (20g) Marzocchi MX Pro Lo (120mm) Marzocchi MX Marzocchi XC Marzocchi M2 Marzocchi Marathon Marzocchi Dirt Jumper Marzocchi 4X Marzocchi MZ RockShox Pike RockShox Domain (115mm)* RockShox Tora (130mm)* RockShox 327 RockShox Revelation Fox Forx Float 36 Fox Forx Talas 36 Fox Forx Van 36 Fox Forx Float 32 (140mm to 150mm)* Fox Forx Talas 32 Fox Forx Van 32. Medium (21g) Marzocchi AM Marzocchi AM 4 (160mm) Marzocchi Z1 Marzocchi 55 R Marzocchi 55 TST Marzocchi Junior T Marzocchi Super T Marzocchi Drop Off (170mm)* RockShox Domain (160mm)* RockShox Totem RockShox Lyrik (115-160mm) Large (25g) Marzocchi 888 Marzocchi 66 RockShox Boxxer Fox 40 Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts NeoGuard Front Mudguard Introducing the new neoprene mudguard called “NeoGuard”; this is an innovative solution to prevent you getting mud in your face when out riding. Traditional mud guards are ugly and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down.The NeoGuard (Patent Pending) is a handy and effective solution to this problem. It throws the mud off every time the fork compresses keeping your bike light and agile. It is simple to fit and very lightweight, this mudguard is perfect for both downhill or cross-country and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you'll never get caught out again. The NeoGuard has been fitted on all the forks listed below; however it is likely to fit many others.Features: Extra Small (18g) Marzocchi Corsa Marzocchi MX Pro Lo (80-100mm) RockShox Reba RockShox Recon RockShox Argyle RockShox Tura (100mm)* * Fox Forx Float 32 (130mm)* Fox Forx F100 Fox Forx F120 Small (20g) Marzocchi MX Pro Lo (120mm) Marzocchi MX Marzocchi XC Marzocchi M2 Marzocchi Marathon Marzocchi Dirt Jumper Marzocchi 4X Marzocchi MZ RockShox Pike RockShox Domain (115mm)* RockShox Tora (130mm)* RockShox 327 RockShox Revelation Fox Forx Float 36 Fox Forx Talas 36 Fox Forx Van 36 Fox Forx Float 32 (140mm to 150mm)* Fox Forx Talas 32 Fox Forx Van 32. Medium (21g) Marzocchi AM Marzocchi AM 4 (160mm) Marzocchi Z1 Marzocchi 55 R Marzocchi 55 TST Marzocchi Junior T Marzocchi Super T Marzocchi Drop Off (170mm)* RockShox Domain (160mm)* RockShox Totem RockShox Lyrik (115-160mm) Large (25g) Marzocchi 888 Marzocchi 66 RockShox Boxxer Fox 40 Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Traditional mudguards are fragile and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down. The NeoGuard™ throws the mud off every time the fork compresses keeping your bike light and agile. It is fast and simple to fit and very lightweight, this mudguard is perfect for both downhill or crosscountry and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you'll rarely get mud in your eyes again.
The ProGuard Hook and Loop Straps from RapidRacerProducts are Hook and Loop straps to quickly attach and remove Proguard V2 mudguard to your bike.
RapidRacerProducts RearGuard Clip-On Off-Road Mudguard The RearGuard Off-Road is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 20 seconds and stays put!The RearGuard is designed for use off road on either a mountain bike or CX bike, it's a fast fitting mudguard for those last minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back The 3 new creases add stability and strength and the additional length adds protection over rough terrain Features: Quick and easy to fit Offers protection from mud and spray Velcro fastener ensures a secure fit Weight: 41gNot recommended for use with dropper seat posts.Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Road Mudguard The RearGuard ROAD is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 10 seconds and stays put!Features: Quick and easy to fit Offers protection from road spray Velcro fastener ensures a secure fitBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The RearGuard - OFF-ROAD is designed for use off-road on either a mountain bike or CX bike, it's a fast-fitting mudguard for those last-minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back. The 3 new creases add stability and strength and the additional length adds protection over rough terrain.
The new Reynolds AERO 80 wheel is built with a deep DET rim profile for one purpose—to go very, very fast. The tubeless ready 19mm channel provides better fit for a broad range of tires and the added width enhances both lateral stiffness and overall ride quality. The new premium hubs by Industry Nine aid lateral stiffness while also lowering rolling resistance, and coupled with their best-in-class engagement these wheels accelerate straight to top speed. Amazing aerodynamic performance and crosswind stability with our Dispersive Effect Termination (DET) rim profile Wide, tubeless ready rim provides better fit for higher volume tires that increase grip, lower rolling resistance with greater comfort and lateral stiffness Precision manufactured hubs from Industry Nine that offer low rolling resistance and quick engagement Safe and predictable braking performance with our Cryogenic Glass Transition (CTg) braking surface. Coupled with Reynolds’ brake pads and temperatures are up to 53% cooler than non-CTg systems. Lifetime Warranty Specifications Rim Material: Carbon Fibre Rim Construction: Dispersive Effect Termination (DET), tubeless ready, Carbon Rim 6 (CR6) Construction Technology Rim Size: 700c Rim Width: Internal 19mm, External 29mm Rim Depth: 80mm Rim Weight: 623g Hub: Reynolds/ Industry Nine - 6 degree engagement, 3 pawl freehub Spoke Count: 18 Front, 24 Rear Brake Interface: Disc Only, Center Lock Front Axle Spacing: 12x100 & 15x100 (Included), QR 100 (Available Separately) Rear Axle Spacing: 12x142 (Included), QR 135 & 12x135 (Available Separately) Freehub: Shimano/SRAM 9-11spd, Campy or SRAM XD-R Wheelset Weight: 1780g
The Reynolds AR41 DB disc brake carbon road bike wheelset deliver all around, everyday performance. The 41mm deep rim is optimized to lower aerodynamic drag and great crosswind handling, but are still light enough to tackle the toughest climbs. The 21mm tubeless ready rim channel provides a versatile fit for an assortment of modern tires to lower rolling resistance and serve up a silky smooth ride. And they cost less than what you’d expect. Features: Wide, Tubeless Ready Rim Provides Better Fit For Higher Volume Tires That Increase Grip, Lower Rolling Resistance And Provide Greater Comfort Refined, Wider Rim Shapes Have Been Optimized For Crosswind Stability At A Variety Of Yaw Angles Features Sapim Sprint Spokes With Brass Nipples Premium Graphics Offer Ultra Clean And Subtle Appearance Equipped With Fast Rolling And Smooth Reynolds Allroads Hubs Which Offer 10° Of Hub Engagement Fitted with tubeless tape, and supplied with tubeless valves Lifetime Warranty Specification: Rim Material: Carbon Fiber Rim Size: 700c Rim Width: Internal 21mm, External 30mm Rim Depth: 41mm Rim Weight: 466g Hub: Reynolds - 10 degree engagement Spoke Count: 24 Front, 24 Rear Brake Interface: Disc Only, Center Lock Front Axle Spacing: 12x100 & 15x100 (Included), QR 100 (Available Separately) Rear Axle Spacing: 12x142 (Included), QR 135 & 12x135 (Available Separately) Freehub: Shimano/SRAM 9-11spd, Campy or SRAM XD-R Wheelset Weight: 1630g