This is the fourth generation of Ass Savers and is easily every user's best friend. Simple to install and weighing just 25.5 grammes Ass Savers Ass Saver Big is always there to cover your back. Ass Savers Ass Saver Big features the patent pending FLIP-TIP™ attachment system. Taking origami principles the FLIP-TIP™ system allows you to securely fasten the Ass Saver to the saddle with a simple flip of the tip and to unlock just flip the tip down and pull backwards. FLIP-TIP™ is compatible with all types of saddle rails including carbon rails. With the new generation of Ass Saver development has continued to reduce saddlebag interference. There is no guaranteed perfect fit but the Ass Saver Big is now a lot easier to install with a saddle bag than the previous models. Tech Spec: Measures: 383x115.5 mm Weight: 25.5 g Material: 0.8 mm PP (Polypropylene)
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
The lenses are anti fog and anti scratch and come as a 3 pack- clear, low light yellow and dark. The lenses come film wrapped to ensure they remain fresh and scratch free until you're ready to ride..
Mark Fairhurst is a world-famous cycling artist who has built a near-fanatical following for his work, inspired by the likes of Pierre-Felix Masseau, Cassandre, and the monumental effect of the Art Deco period. Avidly following the Tour de France, his style captures the joy and freedom of cyclists - even amongst the most competitive of racers. He has illustrated the best selling book, P is for Peloton , now in three languages, Tour de France champion Chris Froome's autobiography, The Climb , and has had his work used by Eurosport and Sky TV.Features:Material: Hardboard Wood with corked back. Size: 9 x 9cm
Grab one of our outstanding Giclee prints today, produced on 300 gsm premium soft cotton paper, these prints are of the highest quality. Our prints come hand rolled to ensure quality is maintained in the finished product, ready for display in a room or location of your choosing. These digital prints are produced on high-quality art paper with a fine detail digital print to give incredible clarity and finish in the final design.Features:Printed on Bright White Cotton Fine Art 300gsm PaperAvailable in A4, A3, A2 sizesMagnetic Hanger Frames and Full Frames availableFrames come with a clear perspex cover to protect your chosen art print.
ETC Vale Mitts combine key features to give you, the rider, maximum comfort and grip for those arduous climbs, tricky planks or tarmac tours. Grippy palms with Gel shock-absorbing pads ensure stout control whilst quick drying Elastane Mesh backs, add comfort and stretch. Terry thumbs allow you to wipe the sweat from your brow without removing your gloves. Key Features: Quick Drying, Flexible Elastane Back,Slender Elastane Wrist Band for Comfort,Strapless Cuff,Enhanced Control Palm Construction,.
High Octane Cycling requires High Spec products. The ETC VALE LC Mitt uses wicking technology to draw away moisture from the key areas and helps to maintain grip and comfort. Ventilated palms, breathable backs, pressure point thumb relief, quick-dry fingers and Terry thumb backs all converge to heighten riders experience. The Long Cuff aids wrist support and provides added comfort on cold days too. Key Features: Synthetic Palm, perforated for ventilation,Wicking Elastane back for comfort and breathability,Pressure Point relief Thumb Pads,Sweat Wipe Terry Towel Thumb Outer,Flexible, quick Dry Material between fingers,Strapless long Cuff,.
No more blisters. Reinforced sections at the toes, heel and the foot to minimize pressure. Ventilation through thinner fabric zones. The foot is secured at the heel with its anti-slip material especially designed for the pedalling movement.The Allround AttendantThe Accesoires Series give the perfect supplies and equipment for all areas. Ideal allround attendants for everything about your bike.Features : Prevents blisters,Cushioned at the heel,Ball of the foot and instep,Ergonomic fit,Anti-slip heel,Regulates temperature across multiple zones.
Giant SpeedShield ATB Fender feature a unique softer PP material construction to prevent cracking in extreme temperatures with UV resistance for improved durability and a proprietary bracket design for a stable fit. FEATURES Unique softer PP material helps prevent cracks in extreme temperatures UV resistance for increased durability Proprietary bracket design helps keep fender stable on the bike Adjustable angle
Developed with Professional Riders, including the Polygon Hutchinson UR Team, the Deflector FM20 front mudguard is adapterd for DH, Enduro or XC use. Both discreet and efficient, it is designed in technopolymer resin to perfectly maintain it on the bike, even on extreme conditions. It's comes with 3 stickers to customise it to suit you.Key Features:Compatible with 26", 27.5" and 29" wheels and the majority of forks currently available on the market.,2 Mounting systems inclued; Snap-On by Velcro or Rilsan Clamps.,Weight: 80g.
The Multiclip Plus gives extra handlebar space for computers, lights, mapholders or gps units.You do not need any tools for mounting.AL5310 handlebar adaptor required in addition to this Multiclip Plus..