crankbrothers Shoe ShieldsReduces shoe tread interface and protects carbon soled shoes. Features: Weight: 4g each Kit Interface: 2 shims Material: Stainless steel Compatible With: crankbrothers mnt cleats Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 11 Ti MTB PedalsTake a sweet ride with the Eggbeater 11 Ti pedal. Weighing in at only 174g per pair, the 11 Ti features all titanium construction with Eggbeater's four-sided entry.The choice of mountain bike pros worldwide, these pedals shed mud like water off a duck. Super easy to service, making them an viable investment for seasons to come.Features: Titanium body, inner wing, sleeve and spindle for ultimate weight savings Low-profile design keeps the sole close to the spindle for a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15° or 20° release angle gives you a customized fit for all terrain 10mm needle bearing inner and cartridge bearing outer Brass cleat and mounting hardware included WEIGHT: 174g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 2 MTB PedalsThe Eggbeater 2 pedal is slightly lighter than its brother the Eggbeater 3. Features Crank Brother's exclusive, four-sided entry, mud shedding design, and weight saving minimalism.Features: Cast stainless body and spring with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and cartridge bearing outer Plastic end caps Brass cleat and mounting hardware included Weight: 272g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet 2 MTB PedalsDual material pedal DH/Race with stamped steel wings. Adjustable pins for custom traction control.Features:Weight: 495g per pairSpindle: forged scm435 chromoly steelPlatform: two piece aluminum nylon bodyWings: stamped steelSpring: 300 series stainless steelSpindle: forged scm435 chromoly steelInner bearing: bushingOuter bearing: cartridgeRelease angle: 15° - 20°Cleats: premium brassManufacturers Warranty: 5 years Warning: Polycarbonate is incompatible with anaerobic liquids. Do NOT use any non-Polycarbonate approved thread locking solvent (such as Loctite 242) on any part of this pedal or cracking could occur. Loctite 380 or 401 is approved for use on all bolts and pins. Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Tread Contact Sleeve Customize the fit of the new generation candy and eggbeater pedals. Material: Eggbeater: 65D urethane - Candy: 30% glass filled nylon. Sizes: 3 pairs included. Thicknesses: 1mm, 2mm, 3mm. Weight: 2 to 5 grams per pair, depending on thickness. Durometer eggbeater: 65D - candy: n/a. Compatibility: Eggbeater: 11, 3, 2 - Candy: 11, 3, 2. Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet Speedlace MTB Clipless ShoesRight out of the box, the Crankbrothers Mallet Speedlace MTB Clipless Shoes are ready to hit the dirt of your favourite downhill and enduro mountain bike trails. A pre-installed Crankbrothers cleat means you can be get clipped in and riding in no time. Just as with their highly regarded pedal systems, attention to detail and innovative engineering are the hallmarks of the Mallet Speedlace MTB Clipless Cycling Shoes. Whichever MTB clip-in pedal system you prefer, the exclusive Match System sole design delivers smooth and no-nonsense cleat engagement, letting you clip in easily and get in your trail-shredding flow without delay. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free LacingWhen you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Downhill/Enduro ShoeSpeed lace & strap for fast and secure adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet Lace MTB Clipless Cycling ShoesFrom steep and rocky downhill mountain bike trails to fast and flowing singletrack, the Crankbrothers Mallet Lace MTB Clipless Cycling Shoes keep you firmly clipped in and in control. The Mallet Lace MTB Clipless Cycling Shoes get the same engineered excellence and attention to detail as their renowned mountain bike pedal systems. As soon as you pull them on you'll enjoy a snug comfortable fit while the innovative Match System sole makes clipping into your pedals such an easy action. Stomp on the pedals and kick up some dirt. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Lace and Go.When it comes to securing your shoes, the Stamp's use ever-reliable laces. The round laces offer smooth adjustment and a firm hold once tied. And they work in all weathers. No fuss. No hassle. A lace pocket keeps them tucked out of the way of your cranks and keeps the shoe sleek and stylish. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Downhill/Enduro ShoeRound laces for secure closure and lace pocket for safety and styleVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet Lace MTB Clipless Cycling ShoesFrom steep and rocky downhill mountain bike trails to fast and flowing singletrack, the Crankbrothers Mallet Lace MTB Clipless Cycling Shoes keep you firmly clipped in and in control. The Mallet Lace MTB Clipless Cycling Shoes get the same engineered excellence and attention to detail as their renowned mountain bike pedal systems. As soon as you pull them on you'll enjoy a snug comfortable fit while the innovative Match System sole makes clipping into your pedals such an easy action. Stomp on the pedals and kick up some dirt. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Lace and Go.When it comes to securing your shoes, the Stamp's use ever-reliable laces. The round laces offer smooth adjustment and a firm hold once tied. And they work in all weathers. No fuss. No hassle. A lace pocket keeps them tucked out of the way of your cranks and keeps the shoe sleek and stylish. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Downhill/Enduro ShoeRound laces for secure closure and lace pocket for safety and styleVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet Boa MTB Clipless Cycling ShoesClip-in and go shred, the Crankbrothers Mallet Boa MTB Clipless Cycling Shoes come fitted with a Crankbrothers pedal cleat so you can be enjoying the comfort and performance of these trail-slayers in no time. Packed with features to make your mountain biking more comfortable and more assured, the Mallet Boa MTB Clipless Cycling Shoes benefit from the same attention to detail that Crankbrothers apply to their pedals. The innovative Match System optimizes cleat engagement for any MTB clip-in system, keeping you confidently in control when flying over technical terrain.The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Twist and Go. Making adjustment super-quick and super-easy, the BOA® Fit System lets you dial in the fit of your shoes just right every time. A simple twist of the dial offers micrometric adjustment, so your shoes are never too tight and never too loose. Plus it's easy to adjust on-the-fly and it's light too. Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Downhill/Enduro ShoeBOA® Fit System & strap for micro-adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet Lace MTB Clipless Cycling ShoesFrom steep and rocky downhill mountain bike trails to fast and flowing singletrack, the Crankbrothers Mallet Lace MTB Clipless Cycling Shoes keep you firmly clipped in and in control. The Mallet Lace MTB Clipless Cycling Shoes get the same engineered excellence and attention to detail as their renowned mountain bike pedal systems. As soon as you pull them on you'll enjoy a snug comfortable fit while the innovative Match System sole makes clipping into your pedals such an easy action. Stomp on the pedals and kick up some dirt. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Lace and Go.When it comes to securing your shoes, the Stamp's use ever-reliable laces. The round laces offer smooth adjustment and a firm hold once tied. And they work in all weathers. No fuss. No hassle. A lace pocket keeps them tucked out of the way of your cranks and keeps the shoe sleek and stylish. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Downhill/Enduro ShoeRound laces for secure closure and lace pocket for safety and styleVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet E Speedlace MTB Clipless Cycling ShoesWith their innovative Match System sole unit, the Crankbrothers Mallet E Speedlace MTB Clipless Cycling Shoes offer super quick and easy engagement of pedal cleats to pedal. Less time hunting for the clip in point and more time enjoying your e-mountain bike riding trail riding. Crankbrothers are renowned for their beautifully engineered mountain bike pedal systems and that same know how and attention to excellence comes to the Mallet E Speedlace MTB Clipless Cycling Shoes. They're designed for the demands of EMTB riders with a tough but comfortable upper matched to a responsive sole unit. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside, ensuring you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while oversize TPU reinforcements to the sides, toe and heel add abrasion resistance in more vulnerable areas. A padded tongue also adds an extra layer of comfort and protection.Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free LacingWhen you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:E-MTB Enduro/Trail ShoeSpeed lace & strap for fast and secure adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet Speedlace MTB Clipless ShoesRight out of the box, the Crankbrothers Mallet Speedlace MTB Clipless Shoes are ready to hit the dirt of your favourite downhill and enduro mountain bike trails. A pre-installed Crankbrothers cleat means you can be get clipped in and riding in no time. Just as with their highly regarded pedal systems, attention to detail and innovative engineering are the hallmarks of the Mallet Speedlace MTB Clipless Cycling Shoes. Whichever MTB clip-in pedal system you prefer, the exclusive Match System sole design delivers smooth and no-nonsense cleat engagement, letting you clip in easily and get in your trail-shredding flow without delay. The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Fuss Free LacingWhen you want to get your shoes on and riding, the Speed Lacing system makes it a straightforward affair. A quick pull and you can get the fit just right, and there's a lace pocket to keep the lace end safe and the shoes streamlined. An upper strap gives an extra level of security and a solid fit that won't let you down. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Downhill/Enduro ShoeSpeed lace & strap for fast and secure adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.