Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
Five different cleaning agents work together to create a high speed cleaning system. Two different rust and oxidation inhibitors protect metal surfaces and prevent flash rusting. Super Bike Wash™ is a complex bio-cleaning compound. It is not a soap or detergent and it does not contain chlorinated solvents, phosphates, benzenes, or napthas, which can damage bicycle components and/or the environment.
Fenwick's Concentrated Bike Cleaner is a complex mixture of surfactants and sequestrants. It may be diluted using 10 parts water to create a “ready to use” Bike Cleaner or used neat in chain baths. Concentrated Bike Cleaner works by attracting dirt, surrounding it and making it easy to rinse away. Fenwick’s Concentrated Bike Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. This simple concept works across all types of finishes, be it, matt, carbon or gloss, leaving a clean, contaminate free surface. The Concentrated Bike Cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use as a Bike Cleaner 1) Using the fill level mark on a Fenwick’s spray bottle, dilute 1 part Concentrated Bike Cleaner to 10 parts water. 2) Spray bike thoroughly with the diluted mixture 3)Allow to soak in for a couple of minutes. 4) Agitate dirt with brush or sponge. 5) Rinse thoroughly with clean water. Directions for use as a Degreaser 1) Apply to drivetrain or parts that need degreasing – can be used in any chain bath and allow to soak in for a couple of minutes 2) Agitate with brush or sponge 3) Rinse thoroughly with clean water
It may not look much but if cleaned after every use, it will clean up chains time and time again. Step 1. Step 2. Step 3. Directions for use: 1) Apply Fenwick’s Foaming Chain Cleaner and allow to soak in 2) Insert chain into ‘V’ slot of sponge on the lower section of the chain 3) Holding sponge firmly in position, run the chain backwards through the sponge for 30 seconds 4) Rinse the chain thoroughly with clean water 5) Re-lube with any Fenwick’s chain lube 6) To clean the sponge, just apply some Fenwick's Foaming Chain CLeaner to the ‘V’ slot straight after use, rub it in and rinse thoroughly.
These bike brushes have “Sure Grip” dual density handles to ensure a positive grip even with wet hands. Each item in this Park Tool Brush Set is specially designed for a specific cleaning purpose: The "Y" brush is for large frame tubes and tyres. It will wrap around these to clean. The wire can also be bent to different shapes for different size tyre and tube shapes. The frame cleaning sponge brush is a combination scrubbing sponge/bristle bush. Very useful between spokes on the rim. Also good for rotors and under the headset, and under the fork. The tapered detail brush also called a "bottle brush" is useful for cleaning hub centres and narrow areas, such as under front derailleurs, behind brakes, etc. The GSC-1 gear brush is for rear derailleur pulleys, rear cogs and any general degreasing. Its comb section is for cleaning between cogs where the bristles cannot reach.
Environmentally friendly, easy to rinse off and highly effective, this degreaser will help you components to look and perform like new again.
This Cleaner is also multi-purpose, as it can even be used as a carbon paste to prevent seatposts slipping in carbon frames.
From the minute you start using FS-10, you’ll know that something is very different. Not only do the natural ingredients smell nice, but they also enhance the performance of FS-10.
Spray the whole bike to bring a sparkle back to the paintwork and any polished metal parts. Then rinse with clean water.
Many cleaning products contain silicon, polish or other additives which have a detrimental effect on disc brakes. Problems caused range from squealing to total loss of power. Hope realised that the only way to stop these problems would be to produce their own range of cleaners. Shifter contains no Sodium Hydroxide (caustic soda) which attacks aluminium and anodised surfaces. Shifter contains a substitute component that acts as a very effective releasing agent cutting through dirt without attacking material surfaces.
The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks.
Designed to get the maximum usage out of your chain, this fluid will remove all sorts of dirt and grease build-up from whatever terrain you have been riding. Ideal for use with the CM-5.2 Cyclone Chain Scrubber, and CM-25 Professional Chain Scrubber, or just as a general purpose degreaser, this formula is 100% biodegradable and plant-based, making it a smart and environmentally-friendly choice for getting your chain gleaming again. Safe to use on alloys, plastics and rubber parts and containing a rust inhibitor for added longevity, this Park Tool CB4 fluid will give your chain the best possible clean ahead of lubrication. Note: Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.