Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
The Allpine Light Eco cleaner is a deep-cleaning, highly efficient and biodegradable bike cleaner that is formulated using pine oil - this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards. With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes). Biodegradable Pine Oil Eco Bike Cleaner Allpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning. There are times when you are in a hurry and a quick cleaning is sufficient, or – especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water. Use Without Rinsing: - Spray Allpine Light on a clean rag and wipe the entire frame - After cleaning, the surface will be shiny, with an anti-water and antistatic effect - As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water - Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning - When the going gets tough, it doesn't hold back - If the bike is very dirty and / or muddy, you have to perform a serious cleaning Use With Rinsing: - Generously spray Allpine Light all over the bike - Wait a few minutes to let the product act - Rinse with plenty of water. A sponge or brush is recommended for an optimal result - Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt - Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaning
The Mangiacatena Replacement Kit is a genuine replacement parts kit for refreshing the internal parts on the Mangiacatena chain cleaner. It includes all brushes and the two lamellar elements, and it is easy to assemble for prolonged service life. This kit allows you to replace the parts subject to normal wear of Mangiacatena, extending its lifespan. Replacing the brushes inside the Mangiacatena is very simple. For lamellar elements, which are glued, it may be necessary to use a cutter or flathead screwdriver to remove the old elements. To glue the new ones, Effetto Mariposa recommends using normal hobby glue or glue for repairing inner tubes. Leave to dry for a few hours before using Mangiacatena.
The all-in-one tool kit for faster cleaning and drying of your CamelBak Crux™ reservoir. Key Features: Two brushes and cleaning tabs keep your reservoir taste-free,Reservoir brush and Pure Flow™ tube brush,Periodic cleaning with CamelBak® Cleaning Tabs™ keeps reservoir and tube free from taste and odor .
Works with all reservoirs, includes reservoir brush and tube brush.
Camelbak Reservoir Cleaning Brush KitAn essential kit that comes with all the brushes and cleaning accessories you need to keep your hydration system clean and safe for great tasting, refreshing hydration.FeaturesCleaning kit for hydration systemsComes with Pure Flow tubeAlso includes multiple cleaning brushesBuy Camelbak Hydration Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
This high-pressure washer is a handy solution for regularly tackling dirty surfaces. The Bosch 360° Gun makes it easy to clean hard-to-reach spaces. The one-handed operation provides more freedom and manageability for faster results. Additionally, the fan jet can be adjusted from a powerful jet spray to a gentle rinse, to suit the cleaning task. The Easy Aquatak 100 can be used for cleaning cars, waste bins, garden furniture, and windows. It also has a High-Pressure Detergent Nozzle that applies detergent simultaneously with the spray for deep cleaning. Detergent Nozzle for Easy Cleaning Convenience The 450-ml High-Pressure Detergent Nozzle reduces cleaning time by applying the soap quickly. A direct connection to the lance makes it simple to use. It is the ideal solution for deep cleaning cars and garden furniture. Compatible with External Water Source Bosch High-Pressure Washers are capable of self-priming from an external water source, such as a rainwater tank. This gives increased flexibility and mobility of cleaning. Lightweight, Dependable and Stylish Lightweight design with accessory storage makes it easy to move between different cleaning areas. The high-pressure hose, gun, and detergent nozzle can be stored on the machine, perfect for storage in small homes. Features: Plugs into mains Connect external water supply using own hose (not supplied) Compact, portable design with a broad base for extra stability Perfect for bikes, cars, boats and all general home use Variable Fan Jet providing forceful wash or gentle rinsing options Pressure: 100 bar Flow Rate: 300 L/H Power: 1200 Watts Max Temp: 40°C Detergent System: High-pressure foam Motor Type: Series Pump Type: 3 cylinder Power Cable Length: 5m Hose Length: 3m Hose Type: PVC Includes: Long Lance, Easy Gun, Variable fan nozzle, 3m Hose Weight (without accessories): 3 kg
Aqua2go Pro Nozzle Head Cleaning HeadThe Aqua2go Pro Nozzle Head is a genuine replacement for Aqua2go portable pressure washers. Genuine Aqua2go replacement part.Features: Adjustable spray head for pressure washers Genuine Aqua2go replacement part Manufacturer's Part Number: AQ-GD131Buy Aqua2go Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Genuine Aqua2go replacement part.
Genuine Aqua2go replacement part.