Simply spray the Rain Shield Re-Proofer on a garment and you'll enjoy restored factory-level waterproof performance within 24 hours of application. The waterproofing technology reduces surface tension, letting water bead and roll off the surface. You'll also find it protects against mud and ground-in stains. And not only that, but it won't compromise the breathability of your garment either. It achieves all this protection while being safe for the environment, thanks to a water-based and PPCF-free formula. How To: 1. Shake the bottle well before use to activate the formula. 2. Spray all over a clean, damp garment from 10-15cm away until the garment is fully treated. (Recommended using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). Muc-Off recommends spraying in a well-ventilated, dry area. 3. Remove any excess treatment with a clean cloth. 4. Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. 5. The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so it's recommended to refresh the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with a re-proofer. Best applied to a clean, damp garment for optimum results.
Your outdoor activities, be it mountain biking, road biking, running or hiking, are tough on your technical kit, what with all the muck and grime. But Technical Wash (300ml) is perfect for refreshing those garments and extending the life of your outdoor kit. It's ideal for use on any waterproof/water-repellent fabric, including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing. Shake it up and use 25ml (5 x 5ml/0.16oz capfuls) per wash load for best results to keep your garments fresh, made with a biological PPC-free formula that's safe for the planet and your garments. How To: 1. Place garments to be washed into your washing machine. 2. Shake the bottle well to activate the formula. 3. Use 25ml (5 x 5ml/0.16oz capfuls) per wash load.4. Dispense Technical Wash for Apparel directly into the detergent drawer of your washing machine, in place of normal washing detergent. 4. Wash on a full cycle at 30°C/86°F or according to care label instructions. 5. Allow garments to air-dry. Top Tip If washing water-repellent/waterproof garments It's recommended to re-treating with Muc-Off Wash-In or Spray-On Rain Shield ReProofer after the wash to restore the water-repellent finish. Follow the directions for use on the bottle for application details.
Waterproof garments will, over time, lose some of the effectiveness of their water-repellent surface finishes. However, the Wash-in Rain Shield Re-Proofer (300ml) is an advanced Durable Water Repellent treatment that creates a new, tough barrier of weatherproof protection. Water will simply bead on the surface and roll off. And Rain Shield won't compromise the fabric's breathability either. Not only that, but it will also protect against mud and stains. It achieves all this protection while being safe for the environment, thanks to a water-based and PPCF-free formula. Protection is fully restored within 24 hours of treatment. Shake to Activate Use 100ml per large item (20 x 5ml caps) on a 30°C/86°F washing cycle for best results to help restore waterproofing performance on technical garments. How to: 1. Muc-Off recommends cleaning your technical apparel with their Technical Wash before treating with Wash-In Rain Sheild Re-Proofer for the best results. 2. Shake the bottle well to activate the formula. 3. For best results we recommend reproofing garments separately. 4. Use 20 x 5ml caps per large item, or two smaller items. Use 5 x capfuls if hand washing. 5. Pour the product directly into the detergent drawer of your washing machine 6. Wash on a full cycle at 30°C/86°F or according to the care label instructions. 7. Air-dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. Or tumble dry if the care label inside your garment permits. Top Tip For an even more durable treatment, you can apply our Rain Shield Re-Proofer spray as a second treatment after using the wash-in formula. This will build a secondary water-repellent coating on garments used in very harsh/wet conditions. N.B The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so it's recommended to refresh the coating every 3 months depending on wear and washing frequency. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellence, due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with Re-proofer.
Morgan Blue Chain Cleaner (250ml)Chain Cleaner is an active cleaner/degreaser suitable for the chain and drivetrain components.Application: Apply the Chain Cleaner on the chain, the front and rear derailleurs. Let the cleaner soak in for about 5 minutes then rinse off with soapy water. Then dry and re-lubricate the chain and drivetrain parts. Always re-lubricate the chain after cleaning.Features: Regular application prevents the deterioration of the chain and the drivetrain components. This ensures higher performance, smoother shifts and longer drivetrain life The chain doesn’t creak, even with heavy useBuy Morgan Blue Cleaner from Chain Reaction Cycles, the World's Largest Online Bike Store.
Morgan Blue Chain Cleaner & Pump ApplicatorAn efficient and easy to use bike-specific solution, this Morgan Blue drivetrain and chain cleaner is fast-acting and strips away dirt and grime, degreasing your components ready for new lube to be applied. It comes with a convenient spray head for quick application and easily accessing hard to reach areas.Application: Apply the Chain Cleaner on the chain, the front and rear derailleurs. Let the cleaner soak in for about 5 minutes then rinse off with soapy water. Then dry and re-lubricate the chain and drivetrain parts. Always re-lubricate the chain after cleaning.Features: Includes spray head for quick application and accessing awkward areas Regular application prevents the deterioration of the chain and the drivetrain components Ensures higher performance, smoother shifts and longer drivetrain life The chain doesn’t creak, even with heavy useBuy Morgan Blue Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Super Bike WashEasy & Fast Clean Up! Super Bike Wash will quickly clean dirt, clay, road grime and chain soils off your bike with little to no scrubbing. Five different cleaning agents work together to create a high speed cleaning system. Two different rust and oxidation inhibitors protect metal surfaces and prevent flash rusting. Super Bike Wash is a complex bio-cleaning compound. It is not a soap or detergent and it does not contain chlorinated solvents, phosphates, benzenes, or napthas, which can damage bicycle components and/or the environment. Features: Safe for all surfaces of a bike. 38oz to 1Ltr Bottle Buy Finish Line Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwicks Bike Cleaner (FS-10)From the minute you start using FS-10, you’ll know that something is very different. Not only do the natural ingredients smell nice, but they also enhance the performance of FS-10. Formulated to encourage maintenance, FS-10 not only cleans deeply, but also makes the whole process of cleaning more enjoyable.Features Free from: Caustics, acids, solvents, metasilicates, abrasives or silicone Safe to use on: Shock units, disc brakes, aluminium, steel, carbon fibre, composites, plastics, decals, rubber and leather Using only the most biodegradable raw materials available, FS-10 is a true everyday cleanser for your bikeBuy Fenwicks Lubes & Cleaning from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwicks Beaded Hand CleanerFenwick’s HC-1 hand cleaner has a solvent free, non-abrasive polybead formula. It is highly effective at removing workshop grime and grease and can be applied to wet or dry hands. Features Aids removal of grease and grime Solvent free Biodegradable Kind to skin Can even be used as a carbon paste to prevent seatposts slipping in carbon framesBuy Fenwicks Lubes & Cleaning from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Bottle Cleaner BrushLifeLine's Bottle Cleaner Brush is perfect for helping you to thoroughly clean out your water bottles, keeping them fresh and hygienic and removing old flavours.Features: Easy Grip handle Sponge head Bristled neck Lifeline graphicBuy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwicks Foaming Chain CleanerA genuine innovation in how bike chains are cleaned and looked after, the highly effective Foaming Chain Cleaner from bike maintenance experts Fenwicks speeds up this normally time-consuming process. This means you can combine cleaning your chain along with washing your bike, rather than having to go back and do the chain separately.With its simple mess-free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use.To make the process even easier just use Fenwick's Chain Cleaning Sponge to scrub the chain and its Gear Brush (both sold separately) to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces.Features:Quickly degreases chains & gears with minimal messSimple to useSolvent & acid freeBiodegradable Directions For Use:1) Place the chain in middle gear for ease of use2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s Bike Cleaner4) For best results run the chain through the Fenwick’s Chain Cleaning Sponge, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean5) Rinse thoroughly with clean waterTop Tip: As a water-soluble degreaser, Foaming Chain Cleaner can be used on delicate partsBuy Fenwicks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwicks Disc Brake CleanerFast and efficient, this disc-brake specific cleaning fluid keeps your rotors spick and span thanks to its evaporating, triple solvent formula. Fit for use on a variety of contaminants, it gives a thorough clean and a dry finish while reducing brake squeal and improving overall performance. Features:Formula: Triple SolventSuitability: Disc brakesInstructions for use: Step 1: Initially, spray from a distance of 20cm to wet down the surface to be cleaned - use short blastsStep 2: Leave for 10 secondsStep 3: After surfaces have been wetted, blast away contaminants by moving the aerosol closer and using prolonged bursts. Catch residue with an absorbent clothTop Tip: If used as a chain degreaser re-lube using a Fenwick's chain lubeBuy Fenwicks Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.