Fenwicks Foaming Chain CleanerA genuine innovation in how bike chains are cleaned and looked after, the highly effective Foaming Chain Cleaner from bike maintenance experts Fenwicks speeds up this normally time-consuming process. This means you can combine cleaning your chain along with washing your bike, rather than having to go back and do the chain separately.With its simple mess-free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use.To make the process even easier just use Fenwick's Chain Cleaning Sponge to scrub the chain and its Gear Brush (both sold separately) to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces.Features:Quickly degreases chains & gears with minimal messSimple to useSolvent & acid freeBiodegradable Directions For Use:1) Place the chain in middle gear for ease of use2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s Bike Cleaner4) For best results run the chain through the Fenwick’s Chain Cleaning Sponge, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean5) Rinse thoroughly with clean waterTop Tip: As a water-soluble degreaser, Foaming Chain Cleaner can be used on delicate partsBuy Fenwicks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwicks Beaded Hand CleanerFenwick’s HC-1 hand cleaner has a solvent free, non-abrasive polybead formula. It is highly effective at removing workshop grime and grease and can be applied to wet or dry hands. Features Aids removal of grease and grime Solvent free Biodegradable Kind to skin Can even be used as a carbon paste to prevent seatposts slipping in carbon framesBuy Fenwicks Lubes & Cleaning from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwicks Bike Cleaner (FS-10)From the minute you start using FS-10, you’ll know that something is very different. Not only do the natural ingredients smell nice, but they also enhance the performance of FS-10. Formulated to encourage maintenance, FS-10 not only cleans deeply, but also makes the whole process of cleaning more enjoyable.Features Free from: Caustics, acids, solvents, metasilicates, abrasives or silicone Safe to use on: Shock units, disc brakes, aluminium, steel, carbon fibre, composites, plastics, decals, rubber and leather Using only the most biodegradable raw materials available, FS-10 is a true everyday cleanser for your bikeBuy Fenwicks Lubes & Cleaning from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwick's Disc Brake Cleaner’s triple solvent formula is designed to clean a wide range of contaminants. The product has been engineered to give a slightly slower evaporation time, thus allowing for a better, deeper clean, resulting in a dry, fully degreased finish. May improve braking performance and reduce brake squeal. Directions for use: 1) Initially, spray from a distance of 20cm to wet down the surface to be cleaned – use short blasts 2) Leave for 10 seconds 3) After surfaces have been wetted, blast away contaminants by moving the aerosol closer and using prolonged bursts. Catch residue with an absorbent cloth Top tip: If used as a chain degreaser re-lube using a Fenwick’s chain lube
From the minute you start using FS-10, you’ll know that something is very different. Not only do the natural ingredients smell nice, but they also enhance the performance of FS-10.
This Cleaner is also multi-purpose, as it can even be used as a carbon paste to prevent seatposts slipping in carbon frames.
Fenwick's Concentrated Bike Cleaner is a complex mixture of surfactants and sequestrants. It may be diluted using 10 parts water to create a “ready to use” Bike Cleaner or used neat in chain baths. Concentrated Bike Cleaner works by attracting dirt, surrounding it and making it easy to rinse away. Fenwick’s Concentrated Bike Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. This simple concept works across all types of finishes, be it, matt, carbon or gloss, leaving a clean, contaminate free surface. The Concentrated Bike Cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use as a Bike Cleaner 1) Using the fill level mark on a Fenwick’s spray bottle, dilute 1 part Concentrated Bike Cleaner to 10 parts water. 2) Spray bike thoroughly with the diluted mixture 3)Allow to soak in for a couple of minutes. 4) Agitate dirt with brush or sponge. 5) Rinse thoroughly with clean water. Directions for use as a Degreaser 1) Apply to drivetrain or parts that need degreasing – can be used in any chain bath and allow to soak in for a couple of minutes 2) Agitate with brush or sponge 3) Rinse thoroughly with clean water
Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
Here at Endura not only do we love being outdoors but we're also passionate about protecting the environment that’s why our latest generation of fabrics are all PFC free. As a result in order to retain the performance benefits of your favourite apparel you'll need to keep your garments re-proofed with more regular applications of products that are gentler on the planet than previously. Show some love for both the planet and your most cherished kit with the brand new collection of Endura Cleaners and Re-Proofers. Eco Care CredentialsSaving time and energy one wash cycle provides powerful cleaning and re-proofing the perfect way to regularly maintain your technical waterproof clothing. Endura Apparel Cleaner and Re-proofer is suitable for use on all outdoor and technical fabrics and is perfect for restoring the water-repellent finishes found on Exoshell fabrics. Safe to use in all domestic washing machines it requires heat activation to work - ideally via low-temperature tumble drying. If a tumble dryer is not available ironing or blow-drying will also work. Based on an environmentally responsible fluorocarbon-free technology and designed to work at low temperatures Endura Cleaner and Re-proofer cleans and restores the Durable Water Repellent (DWR) finish to your garments leaving you fully protected. Single wash cycle clean and re-proof saves time and energy Formulated to clean and restore the Durable Water-Repellent (DWR) finish found on technical waterproof clothing Fluorocarbon-free and environmentally responsible Requires heat activation – ideally via a tumble dryer. Ironing or gentle hairdryer will also work Suitable for use on all ExoShell™ garments
Effetto Mariposa Mangiacatena Chain CleanerThe Mangiacatena Chain Cleaner from Effetto Mariposa is a durable, efficient and fast acting chain cleaning device that scrubs deep into chain links. This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains.If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle.Chain Cleaning with Minimum WasteThere is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvent is wasted without getting to a deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike.Please Note: Reducing the amount of solvent used doesn't mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside.Deep Cleaning FormulaThe chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively remove dirt on each side, pushing the solvent inside the chain.Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it's perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended keeping the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. At the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa have selected Mangiacatena materials and construction for a long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistanceFor Single-Speed Transmissions and 5 to 13 Speed ShainsThe chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.Features: The best way to clean the chain with minimum consumption of degreasing liquid The lamellar elements at both ends retain dirt and liquid inside Mangiacatena, while the six rotating brushes - continuously wet with degreaser - also act mechanically on the chain It can be used both on the lower and upper part of the chain, pedaling in both directions Degreasing liquid or water can be added from above, without the need to open Mangiacatena Made of shockproof and solvent resistant plastic. It can be refurbished with the appropriate replacement brush kit It works with single-speed transmissions (maximum chain width: 9 mm) and 5 to 13 speed chains Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Allpine Light Eco Bike Cleaner (1 Litre)The Allpine Light Eco Bike Cleaner from Effetto Mariposa is a deep-cleaning, highly efficient and biodegradable bike cleaner. Formulated using pine oil, this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards.With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes).Biodegradable Pine Oil Eco Bike CleanerAllpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning.There are times when you are in a hurry and a quick cleaning is sufficient, or - especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water.Use Without Rinsing: Spray Allpine Light on a clean rag and wipe the entire frame After cleaning, the surface will be shiny, with an anti-water and antistatic effect As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning When the going gets tough, it doesn't hold back If the bike is very dirty and / or muddy, you have to perform a serious cleaningUse With Rinsing: Generously spray Allpine Light all over the bike Wait a few minutes to let the product act Rinse with plenty of water. A sponge or brush is recommended for an optimal result Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaningFeatures: Rapidly biodegradable, pine scented and extremely effective against dirt Ideal for E-Bikes, it can be used without rinsing with water in case of slight dirt, drying it with a cloth In presence of mud or on a very dirty bicycle, spray the product abundantly and leave it to act for a few minutes before rinsing with water It doesn't contain silicones but leaves the surface shiny, with an anti-water and dirt-repellent effect It doesn't remove lubricant from the chain Harmless to chrome, painted parts and carbon It doesn't require special disposal precautions (if in doubt, refer to the legislation in force)Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.