Muc-Off Foam Fresh Cleaner AerosolIn between the care we give ourselves and our bike, it’s easy to forget sometimes that our gear needs a little R ‘n’ R from time to time too. Introducing the Foam Fresh from Muc-Off, which works hard to keep your helmet lining, body armour, boots and shoes fresh and clean at all times on the trails. It’s super-easy to use and foams up instantly, making it perfect to remove grime and dirt from the surface of soft materials without causing any damage. Stale smells are done away with too thanks to the Citric Burst fragrance that is contained within.Features:Easy to useUse on helmet liners and other soft materialsInstant foaming actionCitric Burst fragrance500ml aerosolBuy Muc-Off Lubricants from Chain Reaction Cycles, the World's Largest Online Bike Store.
E-Bike Snow Foam has been developed by Tru-Tension for quick and easy cleaning, leaving a polished shimmering shine. Perfect for cleaning in a garage or shed without the need to rinse with water. Ideal for all E-Bikes, Road and MTB. Simply spray on Snow Foam and watch it instantly lift dirt from the surface. Wipe away without the need for water before buffing the surface clean. The perfect E-Bike cleaner. Our all-in-one instant action foam cleaner soaks into the dirt, lifting it away from the surface for an easy clean without the need for water. Once dry it leaves a polish which is buffed in to leave a high gloss finish. Perfect for cleaning indoors and without the need for water. Ideal for removing light dirt from frames and wheels. Safe to use on plastic and painted surfaces. Spray. Soak. Wipe. Buff. How to use your E-Bike Snow Foam Cleaner: Step 1: Spray onto frame, wheels or any painted, metal or plastic surfaces. Step 2: Leave for 5 – 30 seconds. The foam will go to work lifting the dirt and grime. Step 3: Wipe dirt away with a clean cloth. Step 4: Once dirt is removed, use a separate clean cloth (microfibre suggested) to buff the surface in circles to activate the polish, leaving a gleaming finish. Important: Do not use on braking components.
Directions: Get your bike wet Spray or brush Dirt Juice onto the bike and leave it to work its magic for no longer than 2 minutes, agitating the most stubborn areas with brush or sponge. If you prefer a bit more foaming action spray directly on to a brush and get to work with that. Rinse off with fresh water.
Morgan Blue Quick and Clean Bike BrushThe Quick & Clean brush is made for easier cleaning on difficult to reach spots such as behind the drivetrain, under the saddle or the spokes in the wheelset.Features:Long and narrow nylon brushBuy Morgan Blue Cleaning Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Muc-Off Tyre & Cassette Brush is best used with Muc-Off's Nano Tech Bike Cleaner on the affected areas. Then agitate with the Tyre & Cassette Brush and rinse clean, followed by a fresh dose of chain lube.
Fenwicks Foaming Chain CleanerA genuine innovation in how bike chains are cleaned and looked after, the highly effective Foaming Chain Cleaner from bike maintenance experts Fenwicks speeds up this normally time-consuming process. This means you can combine cleaning your chain along with washing your bike, rather than having to go back and do the chain separately.With its simple mess-free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use.To make the process even easier just use Fenwick's Chain Cleaning Sponge to scrub the chain and its Gear Brush (both sold separately) to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces.Features:Quickly degreases chains & gears with minimal messSimple to useSolvent & acid freeBiodegradable Directions For Use:1) Place the chain in middle gear for ease of use2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s Bike Cleaner4) For best results run the chain through the Fenwick’s Chain Cleaning Sponge, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean5) Rinse thoroughly with clean waterTop Tip: As a water-soluble degreaser, Foaming Chain Cleaner can be used on delicate partsBuy Fenwicks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Green Oil Green Clean Low Carbon Bike Cleaner Unlike many bike cleaners, the Green Clean Low Carbon Bike Cleaner does not use nanotechnology, which can be harmful to the environment. This 1 litre bottle comes with 300ml of concentrated cleaner inside, so you can simply top it up with water and you're good to go. This means it has a lower carbon footprint. A powerful cleaner, it's safe on carbon fibre frames and will make your bike look like new again. Features: Green Clean300ml, makes 1litre Carbon fibre safe Powerful bike cleaner Powerful bike cleaner Garden safe No petrochemicals Has pistol model The World's greenest bike cleaner Nanotech free Buy Green Oil Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
Specially formulated to keep satin matt paints, matt finishes and matt vinyl wraps looking as they were intended, this premium grade formula will rid your surfaces of prints, streaks and shiny marks, leaving a non-sticky protective finish as it goes. Built to repel dirt and grime once applied, the Matt Finish Detailer is a great spray to keep blemishes away.
Tru-Tension E-Bike Brake CleanerThe E-Bike Brake Cleaner from Tru-Tension is a fast-acting brake cleaner to improve braking performance after riding in challenging conditions. Formulated to instantly lift dirt, grease and grime, this brake cleaner gives you optimum braking performance on every ride.Tru-Tension's specially formulated Brake Cleaner is designed to rapidly remove dirt, dust, carbon and oil build up on all braking components, leaving you with the optimum braking performance for your bike. Provided in a spray trigger bottle for easy and precise application. Dramatically reduces brake squeal and instantly improves braking modulation. How to use your E-Bike Brake Cleaner: Step 1: Place the bike on a stand of your choice and ensure it is secure Step 2: Apply Brake Cleaner directly onto brake components Step 3: Wipe the dirt away using a clean cloth or leave to evaporateNote: Always use in a well-ventilated area.Features: Improve Braking Performance Medium Drying Instantly Lifts Dirt Perfect for all Brake TypesBuy Tru-Tension Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Your outdoor activities, be it mountain biking, road biking, running or hiking, are tough on your technical kit, what with all the muck and grime. But Technical Wash (300ml) is perfect for refreshing those garments and extending the life of your outdoor kit. It's ideal for use on any waterproof/water-repellent fabric, including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing. Shake it up and use 25ml (5 x 5ml/0.16oz capfuls) per wash load for best results to keep your garments fresh, made with a biological PPC-free formula that's safe for the planet and your garments. How To: 1. Place garments to be washed into your washing machine. 2. Shake the bottle well to activate the formula. 3. Use 25ml (5 x 5ml/0.16oz capfuls) per wash load.4. Dispense Technical Wash for Apparel directly into the detergent drawer of your washing machine, in place of normal washing detergent. 4. Wash on a full cycle at 30°C/86°F or according to care label instructions. 5. Allow garments to air-dry. Top Tip If washing water-repellent/waterproof garments It's recommended to re-treating with Muc-Off Wash-In or Spray-On Rain Shield ReProofer after the wash to restore the water-repellent finish. Follow the directions for use on the bottle for application details.
Tru-Tension E-Bike Snow Foam Bike CleanerThe E-Bike Snow Foam Bike Cleaner from Tru-Tension is the ideal bike cleaner for your electric bike (E-Bike), road or mountain bike (MTB). This fast-acting, instant foaming bike cleaner requires no water and is perfect for use on paint and plastic.E-Bike Snow Foam has been developed by Tru-Tension for quick and easy cleaning, leaving a polished shimmering shine. Perfect for cleaning in a garage or shed without the need to rinse with water and is ideal for all E-Bikes, Road and MTB. Simply spray on Snow Foam and watch it instantly lift dirt from the surface. Wipe away without the need for water before buffing the surface clean. The perfect E-Bike cleaner. This all-in-one instant action foam cleaner soaks into the dirt, lifting it away from the surface for an easy clean without the need for water. Once dry it leaves a polish which is buffed in to leave a high gloss finish. Perfect for cleaning indoors and without the need for water. Ideal for removing light dirt from frames and wheels. Safe to use on plastic and painted surfaces. Spray. Soak. Wipe. Buff.How to use your E-Bike Snow Foam Cleaner: Step 1: Spray onto frame, wheels or any painted, metal or plastic surfaces Step 2: Leave for 5 - 30 seconds. The foam will go to work lifting the dirt and grime Step 3: Wipe dirt away with a clean cloth Step 4: Once dirt is removed, use a separate clean cloth (microfibre suggested) to buff the surface in circles to activate the polish, leaving a gleaming finishImportant: Do not use on braking components.Features: Easy to Use Indoor Cleaning Instant Foaming Action No Water Needed Perfect for Paint and PlasticBuy Tru-Tension Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.