Key Features:Engineered, manufactured, and assembled in Portland, Oregon USA,Legendary made-in-house bearings,Easily serviceable with a 2.5mm hex and pick or pen knife,Completely re-buildable with our R45 Hub Service Tool,Available with Shiamano/Sram HG or Sram XDR driveshell,Available in 28h, and 32h,Ceramic bearing upgrade available.Specification:Axle Width: 130mm,Flange Diameter DS & NDS: 51mm,Center to Flange DS: 17mm,Center to Flange NDS: 34.3mm.
Chris King DropSet 1 Headset (IS41/IS52)Made with hard-wearing, quality top quality materials, this versatile Chris King headset keeps your fork rotating with smoothly and efficiently when connected to your head tube. Combining a 41mm upper bearing and 52mm lower part, it maintains a solid yet easy grip to your fork with its patented GripLock construction, allowing for uninhibited twisting and turning as you weave your way to your destination. Compatible with Santa Cruz and Yeti frames among others, this reliable and long-lasting headset is an ideal addition to your cockpit.Features: Upper Bearing: 41mm 45x45 Lower Bearing: 52mm 36x45 Design: Patented GripLock construction Compatibility: Santa Cruz, Yeti, Alchemy frames (without baseplate) and more Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chris King DropSet 1 Headset (IS41/IS52)Made with hard-wearing, quality top quality materials, this versatile Chris King headset keeps your fork rotating with smoothly and efficiently when connected to your head tube. Combining a 41mm upper bearing and 52mm lower part, it maintains a solid yet easy grip to your fork with its patented GripLock construction, allowing for uninhibited twisting and turning as you weave your way to your destination. Compatible with Santa Cruz and Yeti frames among others, this reliable and long-lasting headset is an ideal addition to your cockpit.Features: Upper Bearing: 41mm 45x45 Lower Bearing: 52mm 36x45 Design: Patented GripLock construction Compatibility: Santa Cruz, Yeti, Alchemy frames (without baseplate) and more Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. The modular design of the headset Chris developed in 1976 served as a platform for him to transform the concept of threadless into one of the most iconic pieces in the cycling universe. The Chris King NoThreadSet™ is simple yet without limitation. It is equally appropriate on road or mountain bikes. It has been ridden to mountain bike world titles in both endurance and gravity disciplines and has crossed the finish line under yellow at the Tour de France. The NoThreadSet™ features aluminum cups, bearing cap, and stem cap built around our renowned stainless steel sealed bearings. Each NoThreadSet™ includes a stainless steel baseplate and our custom starnut with bolt. Check out the Chris King Size chartClick here to enlarge.
The InsetTM 3 is designed to fit a 1 1/8" to 1.5" tapered steerer tubed fork and a 44mm to 49mm internal diameter tapered headtube on the bike. Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. Aluminum cups in 10 available colors house our legendary bearings; all made in-house in our Portland, Oregon facility. InSet™ is the unrivaled upgrade for all riding styles. Check out the Chris King Size chartClick here to enlarge.
###section### Product Specs Rise: 9.125" Width: 29" Up Sweep: 2° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 2.40lbs ###section### ###shogun-image-section###
With design, sustainability & quality running right to the core, there's only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.Instructions:Remove valve cap, o-ring and lock nut.,Insert valve through valve hole in rim.,Push the o-ring onto valve stem.,Thread the lock nut onto valve stem.,Hand tighten lock nut until firm.,Screw on valve cap..
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.