Vitus ZX-1 EVO RED eTap Road BikeEquipped with SRAM’s top of the range Red Etap 2x12 speed wireless groupset and built around a redesigned full carbon fibre frameset, this pro-level version of the Vitus ZX-1 road bike will fire you to the top step of the podium. It’s UCI approved and to enhance it further, it comes with an aerodynamic Reynolds AR58/62 DB Carbon wheelset.Advanced Aero Road Bike FrameVitus has done the testing and know that the EVO exhibits up to 45% less drag than the previous model. But that means nothing until you unleash it outside and feel it for yourself. In the world of aero bikes, amongst all the jargon and data, it's easy to lose sight of what really matters. That to feel fast is to be fast, and you can't feel fast in a wind tunnel. Fast Accelerating Carbon Fibre FramesetThe pleasure of speed only exists in the real world. Out there on the road. The sensation of putting power through your pedals and feeling the bike surge underneath you. And the faster you go, the easier it becomes. That's where the ZX-1 EVO excels. That's the bike working with you as the road snakes and the wind changes. That's aero. Aero Riding PositionThe performance geometry slots the rider into a naturally aerodynamic position, so whether racing flat-out, sprinting for road signs or charging on the front of the chaingang, the EVO gathers momentum quickly and holds speed with ease. Vitus has made this bike fast. They know it rides fast. The rest is up to you.Key Features: Race-Fit geometry SL UD Carbon aero frame and fork with integrated seat clamp Full internal cable routing SRAM Red eTap AXS HRD groupset Reynolds AR58/62 DB Carbon wheelset Vision Metron 5D ACR Carbon cockpit Features: Frame: ZX-1 EVO Carbon, SL UD Carbon, UCI Approved, Internal Cable Routing, 12mm x 142mm axle, Flat Mount Fork: ZX-1 EVO Carbon, SL UD Carbon, UCI Approved, Tapered Steerer, 100 x 12mm, Flat Mount, Size Specific Offset Headset: FSA/Vitus ACR, Sealed Bearings, 1.5" 36x45 degrees (FSA No.55ACR), Vitus/FSA Headset Cover Handlebar: Vision Metron 5D ACR Integrated Bar/Stem Combo, UD Carbon, XS:400mm S:400mm M:420mm L:420mm XL:420mm XXL:420mm Stem: Vision Metron 5D Acr Integrated Bar/Stem Combo, 125mm drop, - 6 degrees, XS:100mm, S:100mm, M:110mm, L:110mm, XL:120mm, XXL:120mm Grip(Tape): Vitus Super Grip, Anti Slip Wheelset: Reynolds AR58/AR62 DB Carbon Carbon Clincher Wheelset Front Rim: Reynolds AR58, Carbon, TubelessReady, Disc Brake, Rim Depth: 58mm, Inner Rim Width: 19mm, Outer Rim Width: 28mm Rear Rim: Reynolds AR62, Carbon, TubelessReady, Disc Brake, Rim Depth: 62mm, Inner Rim Width: 21mm, Outer Rim Width: 30mm Front Hub: Reynolds GW TR3, 100 x 12mm, Centre Lock Rear Hub: Reynolds GW TR3, 142 x 12mm, Centre Lock, XD-R Freehub Front Tyre: Michelin Power Cup Classic TS TLR, 700c x 25c, Tubeless Ready Rear Tyre: Michelin Power Cup Classic TS TLR, 700c x 25c, Tubeless Ready Spokes: Reynolds Sprint 2x Lacing, External Brass Nipples Chain: SRAM Force D1 Crankset: SRAM Red D1 DUB, 48/35T, XS:165mm S:170mm M:172.5mm L:172.5mm XL:175mm XXL: 175mm Bottom Bracket: SRAM DUB BB386, DUB for BB386EVO Front Brake: SRAM Red eTap AXS D1 Disc, Hydraulic Disc, Flat Mount Rear Brake: SRAM Red eTap AXS D1 Disc, Hydraulic Disc, Flat Mount Rotors: SRAM Paceline, Front:160mm, Rear:140mm Front Derailleur: SRAM Red eTap AXS, 2x12 Speed, Braze-On Rear Derailleur: SRAM Red eTap AXS, 12 Speed, Short Cage Left Shifter: SRAM Red eTap AXS, 2x12 Speed Right Shifter: SRAM Red eTap AXS, 12 Speed Freewheel: SRAM XG 1270 D1, 10-33T Saddle: Vitus Race Performance, CRN-Ti Rail, Pressure Relief Channel Seat Post: ZX-1 EVO Aero, +20mm/-2mm Offset, XS/S: 300mm M/L: 350mm XL/XXL: 400mm Seat Screw: ZX-1 EVO Integrated, Internal Wedge System Weight: Medium: 7.8kgTechnologies:Full Monocoque Frame: The ZX-1 EVO features a true monocoque frame, manufactured as a single piece. Comfort and performance go hand-in-hand, while eliminating any joins creates greater strength and results in a light weight, eye catching frame. Less aerodynamic drag, for ultimate speed when out on the open roadRace-Fit Geometry: Race-Fit geometry is reserved for Vitus' performance led race bikes. The aim is to put the rider in the most advantageous position possible, maximising power output and aerodynamic positioning, whilst maintaining comfortDual Fork Design: Vitus has introduced frame size specific fork geometry maintaining fit and handling characteristics across the full size curve. By adjusting the rake on the smaller sizes this ensures handling isn't compromised, whilst at the same time giving riders the same toe overlap versus the bigger frame sizesTyre Clearance: Performance shouldn't come about at the expense of practicality, that's why the ZX-1 EVO brings 700c x 30 tyre clearance across all sizes. For added comfort and control, without compromising on speedEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Vitus Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
With thousands of top-quality products and hundreds of big-name brands, let the cyclist, runner, triathlete or fitness fan in your life treat themselves to what they really want. How do I order a gift voucher? Simply add the gift voucher to your shopping basket like any other product, then continue to the checkout to complete your order. You can also buy other products at the same time as buying gift voucher(s). I’ve ordered a gift voucher – what happens next? You will receive a confirmation email with your voucher details. There will be a link in this email which will enable you to personalise your gift voucher with your own message and then print out to give to your friend or loved one. You will not receive anything in the post for your voucher. I’ve received a gift voucher – how do I use it? Gift vouchers can be used to purchase any product on the Wiggle site*. Select the product(s) you wish to order and add them to your basket. Enter your voucher code in the ‘Voucher Code’ box on the basket page and then click ‘Add Code’. If you’ve been lucky enough to receive multiple gift vouchers you can redeem more than one voucher against an order by repeating this process. You also don’t have to spend all your voucher at once, we keep track of the unused amount for you to redeem on any future order(s). *See the full terms and conditions.
The Zipp 202 Firecrest Tubeless Disc Brake Wheels harnesses high technology for high adventure. This wheel is tubeless ready for road riding that doesn t always stay on smooth pavement.New logo and graphics that scream speedFirecrest rim Technology provides world class handling and stabilityTo ensure compatibility with any bike, our versatile ZR1 hubs come with swappable end caps to work with QR s and thru-axlesTubeless ensuring secure performance even when ridden at lower tyre pressures.The Zipp 202 Firecrest Tubeless retains its 32mm rim depth for a classic feel with real aero benefits. The wheel s 21mm internal width is aerodynamically optimised for use with 28mm wide tyres. Its tubeless design lets you run lower tyre pressures for improved grip and rolling resistance without the risk of pinch flats. At the centre of the 202 Firecrest Tubeless Disc-brake is a durable and versatile new hub set. The ZR1 DB hub offers greater bearing durability and quicker engagement with a Centre locking brake interface.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 32mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 21mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Disc BrakeDriver body type: SRAM/Shimano Road or SRAM XDRColour (hub): BlackAxle type (Wheels): TA 12x142Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tyre pressure: 100psiMax recommended rider weight: 250lbs
ZIPP 202 Firecrest Carbon Clincher Rear WheelState-of-the-art materials and resins are incorporated into the Zipp 202 rim construction, which grants enhanced lateral rigidity for explosive power transfer. A 32mm rim profile reduces rotational weight to a minimum, meaning this wheel spins up to speed instantly while maintaining faster rolling speeds.SPECIFICATIONS Wheel Size700CRim Dimensions32mm Profile. 16mm InternalTubeless Compatible NoApprox. Weight740gHub188. OLD 100mm. Quick Release Axle. Shimano/SRAM 11-Speed. BlackRim TechnologyCarbon FibreWarrantyZipp limited lifetime
From the engineers at Zipp, comes the all-new 302 Carbon Clincher. With a 45mm deep Indianapolis-made carbon rim, optimized for low aerodynamic drag and precise handling in all riding conditions, the 302 Carbon Clincher delivers the ride that Zipp wheels are renowned for at a price that makes Zipp carbon quality and performance more attainable than ever.To keep the wheels light and easy to service we’ve used a center locking brake rotor mounting interface on our 76D/176D hubs. The 76D/176D hubset also features replaceable axle end caps for thru-axle compatibility. Add in the 302’s XDR driver body compatibility, and you have a wheelset that can meet the needs of virtually everyone. And like all of our carbon clinchers, the 302 uses the same rim bed design that makes tire removal and installation as easy as possible.The 302’s smooth carbon rim is hand assembled to Zipp’s new 76D/176D hubs using Belgian CX-Sprint spokes and brass spoke nipples to build a wheel that is both fast and reliable—tough enough to survive the Spring Classics or the road less travelled, yet light enough to tackle the steepest grades.302 rims, like all of our carbon clinchers, are proudly made in Indianapolis. Since Zipp’s inception in 1988 we’ve chosen to handcraft our carbon rims here for one reason: Precision. With complete control of the manufacturing process from start to finish, we build wheels that set the industry standard for precision. Rigorously inspected at our Indianapolis factory, we ensure that only the world’s best wheels receive the Zipp label—and we are proud to make this level of quality more attainable than ever with the 302. The 45mm rim depth provides proven aero benefits with high stability, yet the 302 remains nimble to make this a wheel for all terrain and wind conditions.To keep the wheels light and easy to service we’ve used a splined brake rotor mounting interface for quick and easy rotor installation and removal. The 76D/176D hubs also feature replaceable axle end caps for through-axle compatibility. Add in the 302’s XDR driver body compatibility, and you have a wheelset that can meet the needs of virtually everyone. And like all of our carbon clinchers, the 302 uses the same rim bed design that makes tire removal and installation as easy as possible.Experience Zipp speed with the 302 Disc-Brake.,Each 302 Disc-Brake Wheel Includes:,Zipp valve extenders,Zipp rim tape,SRAM XDR driver body for 176D hub available separately.
Zipp 302 Carbon Rim-Brake Rear WheelZipp 302 guarantees achievable speed, with a 45mm deep rim optimized for low aerodynamic drag and predictable handling in all riding conditions. The 302 achieves this at a price point that makes Zipp carbon quality and performance more attainable than ever. The 302’s Indianapolis-made smooth carbon rim is mated to Zipp's new J-bend hubs to assemble a wheel that is both fast and reliable. Assembled by hand in Indianapolis with 20 Belgian Sapim CX-Sprint spokes up front and 24 out back, the 302 is equally suited to training rides or duking it out at your local criterium series.SPECIFICATIONS Rim Dimensions45mm Profile. 16.25mm InternalTubeless Compatible NoWeight905gHubZR76 J-Bend. OLD 130mm. Quick Release Axle. Shimano 11v. BlackSpokesSapim CX-Sprint. J-BendSpoke Count24HRim TechnologyCarbon FibreMax PSI125psiRider Weight Limit115kgWarrantyZipp Limited Lifetime
*Please Note: Images for display purposes only - check description for specifications.Without LimitsRoad bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp® 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With an all-new disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fibre layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while our robust 77/177D hubset, keep the wheels stiff and responsive.Things To RememberAero, durable, Light weight, Tubeless,77/177 hubset,Thru-axle compatible,. Features And BenefitsFirecrest rim Technology provides world class handling and stability,77/177d hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed,Aero performance, durable and Light Weight,To ensure compatibility with any bike, our versatile 77/177D hubs come with swappable end caps to work with QR’s and thru-axles,ISO 4210 compliant.,. SpecificationsSize (wheels): 650B, 700c,Rim construction: Carbon,Tire compatibility: Clincher Tubeless Ready,Brake compatibility: Disc (6-bolt),Rim - inside width: 21mm,Rim profile: Symmetrical,Rim finish: UD fibre, adhesive decals,Colour (Decal): Black, Blue, White,Nipple material: Aluminium,Spoke type: CX-Ray - Black,Spoke count: 24,Spoke pattern: 2 Cross,Axle type (Wheels): Conversion Caps included,Bearings: Cartridge - Carbon Steel,.
Zipp s 303 Firecrest Tubeless Disc-brake Front Wheel is designed for the real world a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It s faster, lighter, and more capable over varied terrain, whether the surface is pavement in all its conditions or no pavement at all. New Zipp graphics and cosmetic identity that scream speedVersatile endurance wheel for the modern road bike with tubeless and hookless rim profileLighter Weight than its predecessor, making it nimble and fast.Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre.Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the roadNew 40mm rim depth makes a light and aero wheel in every situationNew ZR1 DB hub is engineered in Germany with better seal design for improved durabilityShips with 12mm front and rear end capsCentre locking rotor interface. Lock ring is included with the wheelsDeeply rooted in Zipp s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hub, the German-engineered ZR1 DB. The 303 Firecrest Tubeless Disc-brake wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Orientation (wheels): FrontSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 40mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHubZ: R1 Disc BrakeDriver body type: n/aColour (hub): BlackAxle type (Wheels): TA 12x100Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: n/aDriver body material: n/aMax tyre pressure: 73psiMax recommended rider weight: 250lbsPart Weight (g): 613Please Note: The below tyre brands have communicated to us that their tubeless models are compatible with our tubeless hookless straight side wheels. Riders wishing to run regular clincher tyres should check with the manufacturer if they are compatible with hookless rims. This is a guide and we still recommend consumers confirm compliance with their chosen tyre manufacturer: Zipp - Tangente Speed RT25, R28, and the Tangente Course G40 gravel tyreSchwalbe Rene Herse
Zipp s 303 Firecrest Tubeless Disc-brake wheel is designed for the real world a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It s faster, lighter, and more capable over varied terrain, whether the surface is pavement in all its conditions or no pavement at all. New Zipp graphics and cosmetic identity that scream speedVersatile endurance wheel for the modern road bike with tubeless and hookless rim profileLighter Weight than its predecessor, making it nimble and fast.Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre.Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the roadNew 40mm rim depth makes a light and aero wheel in every situationNew ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagementShips with 12mm front and rear end capsCentre locking rotor interface. Lock ring is included with the wheelsXDR or SRAM/Shimano driver bodiesCampagnolo driver body sold separatelyDeeply rooted in Zipp s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hub, the German-engineered ZR1 DB. This hub features 66 points of engagement for quicker response. The 303 Firecrest Tubeless Disc-brake wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 40mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Disc BrakeDriver body type: SRAM/Shimano Road or SRAM XDRColor (hub): BlackAxle type (Wheels): TA 12x142Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tire pressure: 73psiMax recommended rider weight: 250lbsPart Weight (g): 739Please Note: The below tyre brands have communicated to us that their tubeless models are compatible with our tubeless hookless straight side wheels. Riders wishing to use regular clincher tyres should check with the manufacturer if they are compatible with hookless rims. This is a guide and we still recommend consumers confirm compliance with their chosen tyre manufacturer: Zipp - Tangente Speed RT25, R28, and the Tangente Course G40 gravel tyreSchwalbe Rene Herse
Zipp s 303 Firecrest Tubeless Disc-brake wheel is designed for the real world a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It s faster, lighter, and more capable over varied terrain, whether the surface is pavement in all its conditions or no pavement at all. New Zipp graphics and cosmetic identity that scream speedVersatile endurance wheel for the modern road bike with tubeless and hookless rim profileLighter Weight than its predecessor, making it nimble and fast.Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre.Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the roadNew 40mm rim depth makes a light and aero wheel in every situationNew ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagementShips with 12mm front and rear end capsCentre locking rotor interface. Lock ring is included with the wheelsXDR or SRAM/Shimano driver bodiesCampagnolo driver body sold separatelyDeeply rooted in Zipp s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hub, the German-engineered ZR1 DB. This hub features 66 points of engagement for quicker response. The 303 Firecrest Tubeless Disc-brake wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 40mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Disc BrakeDriver body type: SRAM/Shimano Road or SRAM XDRColor (hub): BlackAxle type (Wheels): TA 12x142Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tire pressure: 73psiMax recommended rider weight: 250lbsPart Weight (g): 739Please Note: The below tyre brands have communicated to us that their tubeless models are compatible with our tubeless hookless straight side wheels. Riders wishing to use regular clincher tyres should check with the manufacturer if they are compatible with hookless rims. This is a guide and we still recommend consumers confirm compliance with their chosen tyre manufacturer: Zipp - Tangente Speed RT25, R28, and the Tangente Course G40 gravel tyreSchwalbe Rene Herse
Zipp s 303 Firecrest Tubeless rim-brake wheels are an all-around wheel for a new era of road riding. It s rich in heritage yet loaded with innovations. It s as adept in the mountains as it is on rolling hills, windswept farm lanes, or ferocious field sprints. New Zipp graphics and cosmetic identity that scream speedNew ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagementBuilt with Sapim CX Sprint J-bend spokesTubeless ensuring secure performance even when ridden at lower tyre pressuresVersatile 45mm rim profile that s fast, stable and versatileABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheelShowstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditionsXDR or SRAM/Shimano driver bodiesShips with QR end caps, quick release skewersCampagnolo driver body sold separatelyAt Zipp, they never rest on laurels. These wheels feature a 19mm internal width and is tubeless ready. That means you can run lower tyre pressure for greater cornering grip and compliance with reduced rolling resistance without the risk the pinch flats. When it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. It s lightweight with ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level NSW wheel line up. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance . Zipp s ShowStopper textured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the centre of the 303 Firecrest Tubeless rim-brake is a new versatile and durable hub, the German-engineered ZR1.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 45mmSurface texture: ABLC DimplesBrake compatibility: RimRim - inside width: 19mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Rim BrakeDriver body type: SRAM/Shimano RoadColor (hub): BlackAxle type (Wheels): QR 135Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tire pressure: 125psiMax recommended rider weight: 250lbsPart Weight (g): 842
Zipp s 303 Firecrest Tubeless rim-brake wheels are an all-around wheel for a new era of road riding. It s rich in heritage yet loaded with innovations. It s as adept in the mountains as it is on rolling hills, windswept farm lanes, or ferocious field sprints. New Zipp graphics and cosmetic identity that scream speedNew ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagementBuilt with Sapim CX Sprint J-bend spokesTubeless ensuring secure performance even when ridden at lower tyre pressuresVersatile 45mm rim profile that s fast, stable and versatileABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheelShowstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditionsXDR or SRAM/Shimano driver bodiesShips with QR end caps, quick release skewersCampagnolo driver body sold separatelyAt Zipp, they never rest on laurels. These wheels feature a 19mm internal width and is tubeless ready. That means you can run lower tyre pressure for greater cornering grip and compliance with reduced rolling resistance without the risk the pinch flats. When it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. It s lightweight with ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level NSW wheel line up. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance . Zipp s ShowStopper textured braking surface delivers unrivalled rim braking performance in wet or dry conditions. At the centre of the 303 Firecrest Tubeless rim-brake is a new versatile and durable hub, the German-engineered ZR1.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 45mmSurface texture: ABLC DimplesBrake compatibility: RimRim - inside width: 19mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Rim BrakeDriver body type: SRAM/Shimano RoadColor (hub): BlackAxle type (Wheels): QR 135Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tire pressure: 125psiMax recommended rider weight: 250lbsPart Weight (g): 842