Clearly Visible, Daytime and Night - With 3 high lumen CREE XP-E2 red LEDs, TR300 provides larger viewing angle and max 300 LED lumens on flashing modes to keep the rider clearly visible in both daytime and night riding. The light also comes with an optional Auto on-off function under which the light will turn on automatically when sensing a motion and switch off after staying still for 2 mins. Key Features: Flashing modes with max 300 LED lumens, providing great visibility for daytime riding,Internal side reflecting stripes, enhancing the side visibility and increasing the rider’s safety,Auto on-off mode for convenient use,Solid and lightweight anodized aluminum body,Compatible with round and aero seatposts,Micro USB charging port, compatible with most phone chargers,Intelligent memory circuit remembers the last used brightness level and mode when turned on again,.Specifications: LED: 3*CREE XP-E2 red LED,Battery: 1600mAh/3.7V rechargeable Li-ion battery,Dimensions (light unit): 41mm (L)*33mm (W)*62mm (H),Weight (light unit): 77g,Design and specifications are subject to change without notice..
Control and synchroniseKey Features:The heart of the SYNC lighting system,Premium textured polycarbonate body,500 Lm output for maximum visibility,Superior side-on visibility for added safety,Customise modes via the SYNC app,Power button communicates pairing & battery infoGREEN ON – other lights are paired,OFF – paired light(s) disconnected,GREEN FLASH – low battery on rear light(s),RED FLASH – low battery on Core headlight,.,Mode: Output, Runtime,High: 500 Lm, 2 hrs,Middle: 150 Lm, 9 hrs,Low: 100 Lm, 15 hrs,Daytime HyperConstant: 500 / 100 Lm, 18 hrs,Flashing: 100 Lm, 130 hrs,Charging Time: 3-6 hrs (USB 2.0),Weight: 94g incl. Flextight bracketGenuine Innovation From The Market Leader - A Smarter Solution For AllCatEye SYNC is an easier, quicker and safer lighting solution for all types of cyclists, from commuters to enthusiast riders. CatEye SYNC offers:,Multiple lights in SYNC,Just one touch SYNCs all,Smarter visibility, day or night,All angles, covered,Be seen all-round, year roundRoad Safety ResearchCatEye’s utilises data from the Institute for Traffic Accident Research and Data Analysis in Japan. This important data is relevant to all modern cities with commuting cyclists across the globe.,78% of all fatal accidents occur in the daytime.,Crossing collisions are most frequent, but rear-end and left / right turn collisions are also common.,87% of human-factor accidents are caused by a delay in noticing the cyclist.CatEye SYNC means:Synchronised:,CatEye SYNC is an easier, quicker and safer lighting solution for many types of cyclists, from commuters to enthusiast riders.,CatEye SYNC means easy on/off – all lights can be turned on/off through one switch on the front light. No separate remote required.,CatEye SYNC makes you stand out – synchronise the flash timing of rear lights for improved visibility to other vehicles on the road, day or night.Customisable:,CatEye SYNC is compatible with Smartphones, using the CatEye SYNC app to set up and monitor up to 7 SYNC lights.,Exclude modes you’re not going to use on the front SYNC Core light,Synchronise the SYNC rear lights so that they flash in unison.,Synchronise the SYNC rear lights to all activate in Kinetic mode.Communicative:,The CatEye SYNC app includes battery level information for all SYNC lights, all communicated through the SYNC Core front light switch.,The SYNC Core monitors power levels and connectivity, eliminating any worries over whether your rear lights are still illuminated and synced while riding. No more checking behind you!,The CatEye SYNC app’s “Find Me” mode identifies which rear lights need charging if you are using multiple numbers of the same rear light..
Front LightSafety first, the AMPP400 comes with maximum side visibility, securely held in place with our adjustable FlexTight™ bracket.Key Features: Rechargeable headlight (400 lm), Wide beam with OptiCube™ lens technology, Excellent side visibility, Low battery indicator (Illuminates in red with less than 20% battery remaining), USB rechargeable (Micro-USB cable included), Mode memory function, Four light modes (High / Low / Daytime HyperConstant / Flashing), Turns on High mode with double-click of power button, FlexTight™ bracket, Improved release button has made it easy to remove the light unit from the bracket,.Rear LightLook no further than the ORB rear light. It's compact, lighweight and neat. With varying flashing modes, the ORB Rechargeable helps you to be seen out on the road.Key Features: Lens functions as push-button, USB rechargeable (Micro-USB cable included), 3 modes *Charging time: 3.5h, Robust aluminum body, Versatile rubber strap mount.
The Nike SB Charge Suede is a skate staple with a sleek, low look. Its flexible design pairs plush foam with soft suede for comfort right out of the box. ###shogun-image-section###
RockShox Charger Damper Bleed KitThis Charger Damper bleed kit is specifically designed for use with RockShox Charger/RaceDay dampers. It includes one RockShox syringe, two RockShox High Performance Suspension Fluid (120ml) bottles and one RockShox Charger1/Standard fitting.Use only RockShox parts with RockShox components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury.Compatibility:This bleed kit is compatible with the following suspension fork part numbers:FS-BXR-RC-B1, FS-BXR-RC-B2, FS-BXR-RC-C1, FS-BXR-SEL-C2, FS-BXR-TEAM-A1, FS-BXR-TEAM-A2, FS-BXR-ULT-C2, FS-BXR-WC-B1, FS-BXR-WC-B2, FS-BXR-WC-C1, FS-LYRK-SEL-C3, FS-LYRK-ULT-C3, FS-PIKE-DJ-A2, FS-PIKE-DJ-A3, FS-PIKE-DJ-A4, FS-PIKE-RCT3-A2, FS-PIKE-RCT3-B1, FS-PIKE-RCT3-B2, FS-PIKE-SEL-B3, FS-PIKE-SEL-B4, FS-PIKE-ULT-B3, FS-PIKE-ULT-B4, FS-RVL-RC-A1, FS-RVL-RC-A2, FS-RVL-RC-A3, FS-RVL-RCT3-A3, FS-RVL-RCT3-A4, FS-RVL-RCT3-A5, FS-SID-RCT3-A4, FS-SID-RL-A4, FS-SID-RL-B1, FS-SID-RL-B2, FS-SID-RL-B3, FS-SID-RLC-A1, FS-SID-RLC-A2, FS-SID-RLC-B1, FS-SID-SEL-B4, FS-SID-SEL-C1, FS-SID-ULT-B4, FS-SID-ULT-C1, FS-SID-ULTC-B4, FS-SID-WC-B1, FS-SID-WC-B2, FS-SID-WC-B3, FS-SID-XX-A4, FS-SID-XX-B1, FS-SID-XXWC-A4, FS-SIDS-SEL-C1, FS-SIDS-ULT-C1, FS-YARI-RC-A1, FS-YARI-RC-B1, FS-YARI-RC-B2, FS-YARI-RC-B3, FS-ZEB-R-A1, FS-ZEB-SEL-A1, FS-ZEB-ULT-A1Features: Type: RockShox Charger Damper Bleed Kit Use: Mountain Bike (MTB) Compatibility: RockShox Pike/BoXXer and more Included: 1x RockShox syringe, 2x RockShox High Performance Suspension Fluid (120ml), x1 RockShox Charger1/Standard fitting for Charger/RaceDay dampers Genuine RockShox spare partsManufacturer's Part Number: 00.4318.007.000 Pink Pike/BoXXerBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Blinder ROAD 250 is a specifically designed hi-powered road light for the discerning rider. With incredible power / weight ratio and dual + constant flash modes, you won't find another light like this.Using two of the latest high-intensity LUMILEDS LEDs and incorporating both wide and narrow angle beams, the Blinder Road 250 floods any street in light, giving cyclists total night vision whilst being visible to others at over 1000m.SpecificationDimensions: 53x30x63mm,Weight: 105g,Materials: UV-resistant industrial grade silicone rubber body and strap. Polycarbonate housing. PMMA Lens. Anodised aluminium heat sink. Anodised aluminium fascia and solid stainless steel MIM latch.,LEDs: 2 x Lumileds Luxeon Z ES,Battery: Integrated rechargeable Lithium Polymer.,Peak brightness: 250 Lumens,8 Light modes: 1. Narrow Low Beam, 2. Narrow High Beam, 3. Wide Low Beam, 4. Wide High Beam, 5. Dual Low Beam, 6. Dual High Beam, 7. Alternating LEDs Flashing, 8. Alternate flashing, eco flash,Run-time (steady): Narrow low - 2hrs, Narrow high - 1.5hrs, Wide low - 2hrs, Wide high - 1.5hrs, Dual low - 2.7hrs, Dual high - 2.2hrs,Run-time (flash): One flash, one constant - 3.5hrs, Alternating flash, eco flash - 5.5hrs,Waterproof: 100% Waterproof and Dustproof to IP67.,Beam angles (degrees): Narrow - 15°, Wide - 22°, Dual - 15°/22°.FeaturesLens: Two high precision, injection moulded TIR collimating lenses give a balanced ratio of beam width and distance to safely illuminate you and the path ahead.Visible to 1000+ metresIntegrated lithium polymer battery with on board battery protection circuit. Rechargeable via built in USB plug and extension cable (included). This saves using about 600 AAA Alkaline batteries during the light's lifetime.Constant current drive technology maintains consistent brightness throughout specified run-time.Integrated USB plug is waterproof and designed not be damaged by exposure.5 hour charge timeReplaceable straps for tool-less attachment, 1 x Short (for ø22-28mm) 1 x Long (for ø29-35mm)Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec).Low battery indicatorThermal management automatically regulates the light output for optimum performance when the bike is stationary and in motion.Accessories: USB Extension Cord, Helmet Mount Kit.Tested against dropping, corrosion, UV, electrical shock and static, vibration and impact, temperature and humidity, as well as cycle testing and CE certification.
PWR Commuter is a 450 lumen LED bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; is USB rechargeable, and has 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two Charger lights come with 5 pre-programmed modes, just in case you haven't yet discovered the ModeMaker app. The optimum steady mode for the PWR Commuter is the aptly named Commute mode. It runs for 2 hours at 200 lumens, but there is always the option to crank it up to the 450-lumen Ride mode. Elliptical beam - Elliptical beam for wide view works with spot beam for intense light in front of front wheel. Programs your modes - The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes.Charge your devices - Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @250 lumens means you can top up charge your iPhone by 10%. Charge time 3.5 hours. Specification: Light output: 450 Lumens.,Power Bank: 850 mAh.,Dimensions: 98 x 30mm Ø.,Weight: 85g.,Battery indicator.,CNC Machined.,Programmable modes.,USB rechargable.,Water resistant when cap is on.,. Mode Lumens Runtime Ride 450 40 mins Commuter 190 2.5 hrs Stamina 50 7.0 hrs Pulse 320 2.5 hrs Strobe Flash 190 3.5 hrs Eco Flash 50 35.0 hrs
Hecto Drive 500XLCompact, durable cycling light with a machined aluminium body. It features built-in cooling fins and cut-outs for side visibility. Its single LED design provides up to an impressive 500 lumens of output and eight output modes - including a Daytime Flash mode. Runtime has increased by 2.5 hours for up to 20 hours. Charging is simple with an integrated cable-free USB stick. It’s available in five colours (Black, Silver, Red, Blue, Purple) and securely straps to a variety of handlebar shapes and sizes. Key Features:Max Lumens: 500 lumens.,Weight: 84g.,Max Runtime: 20 hours.,Recharge Time: 2.5 hours.,Colours: Black, Silver, Red, Blue and Purple..
The Blinder Road R70 is the rear bike light for the discerning rider. With side illumination, dual and constant flash modes, and super power, you won’t find another bike taillight with as much brains and beauty. Specification: Dimensions: 27x75x35mm,Weight: 75g,Materials: UV-resistant industrial grade silicone rubber body and strap. Polycarbonate housing. PMMA Lens. Anodised aluminium heat sink. Anodised aluminium fascia and solid stainless steel MIM latch.,LEDs: 1 x CREE XB-D, 3 x Super bright LEDs,Battery: Integrated rechargeable Lithium Polymer.,Peak brightness: 70 Lumens,5 Light modes: 1. Steady, 2. Fast flash, 3. Linear flash, 4. Steady 2 LEDs, 5, Eco flash,Waterproof: 100% Waterproof and Dustproof to IP67.,Beam angles (degrees): Narrow - 22°, Wide - 80°,Visible to 1000+ metres,Integrated lithium polymer battery with on board battery protection circuit. Rechargeable via built in USB plug and extension cable (included). This saves using about 600 AAA Alkaline batteries during the light's lifetime.,Constant current drive technology maintains consistent brightness throughout specified run-time.,Integrated USB plug is waterproof and designed not be damaged by exposure.,5 hour charge time,Replaceable straps for tool-less attachment, 1 x Short (for ø22-27mm) 1 x Med (for ø27-32mm) 1 x Long (for ø32mm+).,Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec).,Low battery indicator, Tested against dropping, corrosion, UV, electrical shock and static, vibration and impact, temperature and humidity, as well as cycle testing and CE certification.,. Mode Runtime Steady 3.5 hrs Fast Flash 4.0 hrs Chaser Flash 5.0 hrs Peloton 13.0 hrs Eco Flash 20.0 hrs
This electric bike charger adaptor connects to the BT-E8035 battery so that you can charge the battery with your E6000/E6002/E8004 charger.
Shimano STEPS SM-BTE80 Battery Charger AdapterThis electric bike charger adaptor connects to the BT-E8035 battery, so that you can charge the battery with your E6000/E6002/E8004 charger. The Shimano STEPS SM-BTE80 Battery Charger Adapter is required for when you are charging your STePS battery off your bike.Features: Material: Plastic Colour: Black Charger Compatibility: Shimano EC-E6000/E6002/E8004 For charging Shimano BT-E8035 battery Manufacturer's Part Number: SMBTE80A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Keep your SRAM Red eTap system going with the SRAM eTap Battery Charger.To remove the battery from your derailleur simply flip the tool-free battery latch and slide out the battery. Then snap the battery into the USB powered charger and away you go. A full charge takes just 45 minutes to complete.Compatibility: SRAM Red eTapUSB Port can be plugged into a computer or A/C to USB plugCharge Time: 45 minutesBattery not included