The CNW-2 makes chain ring bolt installation and removal easyIt securely holds the slotted nut to prevent spinning when tightening or loosening the boltDouble-ended to fit most slotted-type nuts
Park Tool Chainring Nut Wrench (CNW-2)Install and remove chainrings with ease thanks to the Chainring Nut Wrench from Park Tool. Benefiting from a double-ended design to fit most slotted-type nuts, its design prevents spinning when tightening. The ideal tool for your cycle workshop. Features:The outer width of both ends of the CNW-2 are nominally 12mm wideOne end has a two outer tips nominally 2.7mm wide each, and the other end has tips of 3.8mm eachCompatibility: Double-ended to fit most slotted-type nutsBlade Thickness: 1.35mmNote: The CNW-2 replaces the CNW-1Weight: 19.6gBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool chainring wrench tool is very simple to use and can save valuable time during chainring changes.
The Park Tool LRT-4 is designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900 and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminium for a perfect fit and to prevent marring expensive parts.Machined flat face for optimal lockring engagementFor lockrings with 41mm outside diameter and 16 notches36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque6061 aluminium construction
The Park Tool CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts.
OneUp Components Switch ChainringThe OneUp Components Switch Carrier design was developed to reduce the cost of replacement chainrings, make changing chainrings much easier and to make compatibility with many direct mount crank standards and bike offsets a breeze.Switch a Chainring in Under a MinuteOneUp Components have designed the Switch Chainring in conjunction with the Switch Chainring Carrier. Not only does this mean that the chainring can be used with any direct mount crankset standard when using the correct carrier, it also makes it possible for the chainring to be changed in less than a minute without having to remove the crank from the bottom bracket.Easy Interchangeable Gear RatioThe Switch Chainring Carrier interface means that when running a single ring (1x drivetrain); you now have the option to carry a number of different chainring sizes that can easily be switched depending on your intended terrain. For example, if you have a day consisting mainly of climbing followed by a day of descending, you can plan ahead and pick your chainring sizes for the trip based on the chainrings you would like to use.Features:Material: 7075-T6 AluminiumCompatibility: All Switch ChainringsCrankset Interface: Direct MountWeight: 31g (SRAM Mount)Buy OneUp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
OneUp Components Narrow Wide Single ChainringCompatible with a wide range of SRAM and Shimano cranksets, this hard-wearing Narrow Wide Single Chainring from mountain bike (MTB) component specialists OneUp Components provides ultra-efficient chain grip as you ride over the roughest terrain. Made from tough yet lightweight 7075-T6 Aluminium, plus featuring reinforced teeth and mud clearing chamfers, this chainring delivers the performance and strength you need and a long usage life.Features: Material: 7075-T6 Aluminium Speed: 9,10,11 and 12-Speed Chainline: 48-50mm Bolt Circle Diameter (BCD): 4x94/96mm Compatibility: 94/96mm - all symmetrical 4 arm 94mm bolt circle diameter (BCD) cranks (SRAM X01, X1, GX), all symmetrical 4 arm 96mm BCD cranks (Shimano compact triple M782, M672, M622, M612); 104mm - all 104mm BCD cranks Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit Perfect 49mm chainline with 2mm Shims included for a quieter drivetrain, improved chainring wear and best no drop performance Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms Reuse your existing 8-10mm long ring hardware - no new bolt packs required Aggressive crud chamfers for awesome mud shedding performance and extended ring life Reinforced wide tooth design provides maximum ring durability when run without a bash guard 104-30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible Weight: 94mm - 43g (30T), 49g (32T), 58g (34T); 96mm - 43g (30T), 49g (32T), 58g (34T); 104mm - 40g (30T), 44g (32T), 54g (34T), 2g (4x shims) Please Note: NOT compatible with 10-Speed Shimano XT armsets and also NOT compatible with 12 Speed Shimano/Hyperglide Chains.Please Note: Shims are included with ring. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware.Buy OneUp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Cinch Oval Boost Chainring Race FaceThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its Boost chainline and Race Face CINCH Direct Mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: Race Face CINCH Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline (Boost): 52mm with RXC and RF134 spindles, 53mm with RF134 spindle Compatibility: SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Number: MR-23-1-251 Black 30T RaceFaceBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Cinch Oval Chainring Race FaceThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its 49mm chainline and Race Face CINCH Direct Mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: Race Face CINCH Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline: 49mm with RXC and RF134 spindles, 50mm with RF134 spindle Compatibility: Shimano 9/10/11 speed and SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Numbers: MR-23-1-241 Black 30T RaceFace MR-23-1-242 Black 32T RaceFaceBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Cinch Oval Chainring Race FaceThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its 49mm chainline and Race Face CINCH Direct Mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: Race Face CINCH Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline: 49mm with RXC and RF134 spindles, 50mm with RF134 spindle Compatibility: Shimano 9/10/11 speed and SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Numbers: MR-23-1-241 Black 30T RaceFace MR-23-1-242 Black 32T RaceFaceBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Boost Oval Chainring SRAMThis high-quality mountain bike (MTB) chainring features standard teeth with an Oval chainring shape, which allows you to benefit from increased power with less effort. This makes it ideal for all-day epics on your favourite mountain routes and beyond. Another highlight is its Boost 52mm chainline and SRAM direct mount design, which makes it simple to integrate into your existing setup. Made in the USA, this is an excellent choice of upgrade for dependable chain retention and performance as you hit the trails.The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP's Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles' Heels” of narrow/wide designs.Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium.Wave Chainring Technology AdvancementsThe MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability.- Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth.- Alternating lateral force to each chain link to actively retain links to the ring.- Less surface contact between chainring and chain creating minimal friction and maximum retention.- Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance.- Tooth design allows for reduced weight chainrings over competitor technology.Features: Material: CNC-machined 7075 Aluminium Use: Mountain Bike (MTB) Mount Type: SRAM Direct Mount Teeth Type: Standard teeth Chainring Shape: Oval Chainline: 52mm (Boost) with GXP and DUB cranksets Compatibility: Shimano 9/10/11 speed and SRAM 9/10/11/12 speed compatible (not compatible with 12 speed) Number of Chainrings: Single Designed for x1 drivetrains Not reversibleManufacturer's Part Number: MR-23-1-231 Black 30T SRAM MR-23-1-232 Black 32T SRAMBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Wave Chainring GXP - DMThe Wave chainring is an evolution in narrow/wide chainring designs. The wider spacing ensures that mud is cleared more efficiently whilst still maintaining a tight grip on chain security.Features:Compatible with SRAM XX1, X01, X0, X9, 2200, 1400 and Truvativ AKA cranksAvailable in 28-42t even sizesSingle Ring 1x 8, 9, 10 or 11-speed drivetrainsMade from CNC 7075 AluminiumBuy MRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.