Wolf Tooth EnCase Chainbreak Tyre Plug ToolThe EnCase Chainbreak Tyre Plug Tool is a versatile and durable tool that features a chainbreaker and a tyre plug tool. Plus, this tool is compatible with the EnCase system, this meaning you can store it in your bike handlebars.Durable, Convenient and Low-Profile Tool StorageFix tubeless tyres and broken chains. This multi-tool has a chain tool on one end and a tyre plug built into the handle, with inner storage for tubeless tyre plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. Features: Material: 7075-T6 Aluminium, Chromoly (CrMo) steel, butyl strips Compatible with all bicycle chains, including 12-speed Inserter tool and bacon strips plug holes in tubeless tyres Five bacon strip tyre plugs included; refills available (EnCase System Extras) Hardened steel chain pin driver for lifetime durability Store in handlebar with EnCase System Storage Sleeves (sold separately) or carry in a jersey pocket Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench Multi-Tool) Compact design of the chain tool is for removal of chain pins only. Always carry a spare master link for chain repair Fits most mountain handlebars and road handlebars when combined with the storage sleeve. Works with both carbon and aluminum handlebars. Does not fit ergonomic-style road bars with extra bends in the drops. Minimum internal bar diameter is 17.5mm Known incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, Chromag Cutlass, BMC RCB01, S-Works Hover Carbon Weight: 46gBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 104 BCD Stainless Steel ChainringReady for adventure, this solid component is compatible with 104 BCD crankset for a perfect fit. It features Wolf Tooth's patented Drop Stop technology which uses a narrow/wide tooth pattern to improve chainring life. This superb version's wide side of the tooth has maximum contact on the drive side which spreads the load while its narrow side allows for mud and debris clearance. Compatibility:These are functionally the same as the aluminium 104 BCD rings. These rings fit any 104 BCD crankset, and here are instructions on how to measure your BCD. Notes for those the plan to run a 32t chainring on a 2x Shimano crankset (XT, SLX, or Deore). 30t x 104 ring is the only Quarq power meter compatible 30t ring available.For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains. If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Chainline: Chainline (approximate as BB centering and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2xChainring bolts are required for 1x 104 x 30t - use 10mm bolts 104 x 32t uses 6mm chainring bolts If mounting a 104 BCD bashring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets. Features: Material: Hardened and electropolished 416 Stainless Steel Use: MTB BCD: 104 Tooth Pattern: Wide/Narrow Weight: 30T: 72g; 32T: 88gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth M9000 ChainringThis high-quality chainring is engineered for lawless mountain adventures as it gives you a smooth and reliable off-road performance. Designed to propel you from the top of the slopes to the forest floor, this brilliant component features a robust 7075 T6 aluminium construction. This makes it perfect at withstanding all the intensity that comes with exploring unpredictable terrain conditions while allowing you to benefit from its powerful torque properties. Wide/Narrow MTB ChainringAll set for rowdy forest runs, this sturdy warrior is kitted out with Wolf Tooth's patented wide/narrow tooth profile. On its wide side it maintains maximum contact with the drive side which spreads the load and improves chainring life. Its narrow side also allows for mud clearance and debris to pass through which reduces friction. One final highlight is its tooth pattern also prevents chain derailment, so you can ride confidently with this reliable component keeping you in control.Compatibility:These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksetsUse only the stock Shimano XTR chainring bolts (M7)You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset.For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes.Features: Body Material: 7075 T6 Aluminium BCD: 96mm Tooth Count: 32T Compatibility: Shimano XTR M9000 Tooth Profile: Wide/Narrow Weight: 50g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Chain Ring (110 BCD)This high-quality chainring is specifically designed for gravel use as it offers amazing smoothness and control with every rotation. It features a sturdy 7075-T6 aluminium construction which makes it incredibly robust when riding over mixed terrains. Whether you're pedalling around the city or exploring the countryside, this versatile component is designed to give you maximum performance. Wide Narrow MTB ChainringEquipped with a patented Drop-Stop technology, this model's wide side of the tooth has superior contact on the drive side which spreads the loads and improves chainring life. Its narrow side allows clearance for mud and debris which reduces friction, so you can benefit from a more reliable chain engagement as you move. Compatibility: - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50T are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36T chainring is NOT compatible with these cranks. - Size 42T and larger will work with the Dura Ace 9100 power meter.Features: Material: 7075-T6 Aluminium Use: MTB, Gravel, Cyclocross BCD: 110mm Bolt: 4-bolt Tooth Pattern: Wide narrowBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 104 BCD ChainringPropelling you across the forest with power and poise, this brilliant component uses Wolf Tooth's patented Drop Stop tooth design. This technology enables it to be classed as one of the best-performing and longest-lasting wide/narrow chainrings on the market. It works by using its wide side to maintain maximum contact with the drive side which spreads the loads and improves chainring life. Also, its narrow side allows for excellent mud and debris clearance which reduces friction. Compatibility:Fits any 104 BCD cranksetChainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours104 x 30t - use 10mm bolts104 x 32t, 34t, 36t, 38t use 6mm bolts. If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm)32t 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore)The 30t x 104BCD chainring is the only available ring for the QUARQTM power meterDrivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrainsCompatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chainsShimano 12-speed chains require the use of our Shimano 12-speed specific chainringsIf using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retentionFeatures: Body Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Tooth Count: 32T Bolt: 4-bolt Weight: 47g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 104 BCD ChainringPropelling you across the forest with power and poise, this brilliant component uses Wolf Tooth's patented Drop Stop tooth design. This technology enables it to be classed as one of the best-performing and longest-lasting wide/narrow chainrings on the market. It works by using its wide side to maintain maximum contact with the drive side which spreads the loads and improves chainring life. Also, its narrow side allows for excellent mud and debris clearance which reduces friction. Compatibility:Fits any 104 BCD cranksetChainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours104 x 30t - use 10mm bolts104 x 32t, 34t, 36t, 38t use 6mm bolts. If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm)32t 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore)The 30t x 104BCD chainring is the only available ring for the QUARQTM power meterDrivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrainsCompatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chainsShimano 12-speed chains require the use of our Shimano 12-speed specific chainringsIf using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retentionFeatures: Body Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Tooth Count: 32T Bolt: 4-bolt Weight: 47g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Direct Mount Mountain Bike Chain RingThis high-quality chainring is perfect for fast and rowdy MTB use as it delivers powerful torque performance as you blast across the mountains. It features a rock-solid aluminium construction which makes it exceptional at handling the increased pressure which comes with all-day epics and off-road adventures. Developed or use with your SRAM crankset which has SDM fitment, this fantastic component replaces your existing upper spider and chainring with one lightweight component.Features: Material: 7075-T6 Aluminium Use: Mountain Bike (MTB) and Road Mount: Direct Mount Compatibility: SRAM cranksets with SDM fitment Weight: 65g (32T); 90g (38T) and 111g (42T)Compatibility Information:These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.Chain Compatibility:- All 9, 10, 11 speed chains as well as 12 speed SRAM Eagle, Campagnolo, KMC and SRAM Flat Top AXS chains - They do not work with Shimano 12 speed Hyperglide+ chains.- Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings.- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano GRX 110 BCD Asymmetric ChainringCustomised to work with Shimano’s gravel bike GRX cranksets, this Wolftooth chainring is made from a tough 7075-T6 Aluminium and adopts “Drop-Stop” tooth technology. This ensures that your chain will always stay in place not matter how rough the terrain gets, increases the chainring’s durability and speeds up its mud clearing ability.Versatile Gravel Bike ChainringThe updated tooth profile works with SRAM Flattop chains in addition to other 9, 10, 11 and 12 speed chains (except the Shimano HG+ 12 speed chain).Features: Material: 7075-T6 Aluminium Speed: 9 to 12-Speed Bolt Circle Diameter (BCD): 4x110mm (Shimano asymmetric) Crank Compatibility: Shimano GRX cranksets including RX600 and RX810 Chain Compatibility: 9, 10 and 11-Speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chains (not suitable for Shimano HG+ 12-Speed chain).Chainline: 50mm (same as Shimano GRX chainrings)Made in the USA Patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability Optimised for use with drop bar bikes Sold inividually Manufacturer's Part Numbers: 38T: WTSH11038GR; 40T: WTSH11040GR; 42T: WTSH11042GR; 44T: WTSH11044GR; 46T: WTSH11046GR Weight: 38T: 72g; 40T: 84g; 42T: 89g; 44T: 92g; 46T: 102gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano GRX 110 BCD Asymmetric ChainringCustomised to work with Shimano’s gravel bike GRX cranksets, this Wolftooth chainring is made from a tough 7075-T6 Aluminium and adopts “Drop-Stop” tooth technology. This ensures that your chain will always stay in place not matter how rough the terrain gets, increases the chainring’s durability and speeds up its mud clearing ability.Versatile Gravel Bike ChainringThe updated tooth profile works with SRAM Flattop chains in addition to other 9, 10, 11 and 12 speed chains (except the Shimano HG+ 12 speed chain).Features: Material: 7075-T6 Aluminium Speed: 9 to 12-Speed Bolt Circle Diameter (BCD): 4x110mm (Shimano asymmetric) Crank Compatibility: Shimano GRX cranksets including RX600 and RX810 Chain Compatibility: 9, 10 and 11-Speed chains or 12 speed SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chains (not suitable for Shimano HG+ 12-Speed chain).Chainline: 50mm (same as Shimano GRX chainrings)Made in the USA Patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability Optimised for use with drop bar bikes Sold inividually Manufacturer's Part Numbers: 38T: WTSH11038GR; 40T: WTSH11040GR; 42T: WTSH11042GR; 44T: WTSH11044GR; 46T: WTSH11046GR Weight: 38T: 72g; 40T: 84g; 42T: 89g; 44T: 92g; 46T: 102gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.