Made from tough, durable rubber, the Rapide Chainstay Protector from Vitus is designed to fit the Rapide FS frame perfectly to protect from chain slap and provide a quieter ride.
This 9 speed MTB chain features a hardened alloy steel construction, which makes it more than capable of handling every challenge that you're met with on the mountains. Classed as Box's best performing chain, this model is also equipped with a durable dual-coating with nickel-plating for protection against corrosion. This makes it suitable for use in all-weather conditions, while its durable hardened solid pins give it extra durability on the most demanding of trails. The Box One chain is protected by our dual-coating. We start with Nickel plating which aids in corrosion resistance and then top it off with the "Diamond-Like Carbon" layer. The DLC is as fancy as it sounds; a synthetic diamond nano-coating that turns up the volume on hardness, wear-resistance, and slickness. All Prime 9 chains have chamfered shifting edges, solid plates and solid pins to safeguard durability. Our unique inner link spacing is engineered to grab those modern wide/narrow chainrings. We chose to modernize the 9-speed platform due to the chain's spirited reputation. Compatibility: • Box One Prime 9 11-50T Cassette Black • Box Two Prime 9 11-50T Cassette Black • Box Three Prime 9 Cassette Black • Box One Prime 9 Rear Derailleur • Box Two Prime 9 X-Wide Rear Derailleur Black • Box Three Prime 9 X-Wide Rear Derailleur Black • Box One Prime 9 Shifter Black • Box Two Prime 9 Shifter Black • Box Three Prime 9 Shifter Black FAQ: Is the Box One Prime 9 Chain compatible with other 9 speed drivetrains? Yes, All Box prime 9 chains have standard external geometry that will work with most existing 9 speed drivetrains. Is the Box One Prime 9 Chain Compatible with any wide narrow chainring? No, Box Prime 9 chains are compatible with most 11-speed wide narrow chainrings but there are some chainrings that can result in poor performance. We recommend the following 11 speed wide/narrow chainrings for best performance, Wolftooth Components, Raceface, One Up Components, Absolute Black. How should I clean my Box One Prime 9 Chain? We suggest removing the chain from the bike and using a soft bristle brush or rag with soapy water or a mild de-greaser. We do not recommend pressure washing, strong solvents or de-greasers as they could degrade the surface coating.
Designed for Nukeproof Reactor Alloy 290 model, this genuine Nukeproof chain stay protector features a durable moulded silicone construction. Plus, it attaches to your frame's chain stay via the 3M adhesive backing and is a superb barrier against bangs, dings and dirt.
Engineered for the demands of mountain bike (MTB) trail riding, this chainguide comes equipped with a robust aluminium backplate for a fantastic balance of strength and durability on the more demanding of terrains. E Thirteen has also given the backplate an anodised finish for extra wear resistance and protection against corrosion during wetter riding conditions. The TRS Plus Bash-Only Chainguide is engineered to deliver maximum drivetrain protection from rock strikes and logs. A modular assembly allows riders to choose from one of two sizes of bash guards (28-30t, 32-34t included). All polycarbonate parts are solvent resistant, and E Thirteen's tool-free compact upper slider is co-moulded to cut down on noise. Manufacturer's Part Number: E13CG2005 Black 28-34t
This high-quality KMC e11 EPT chain features 136 links with reinforced riveted joined that are optimised for 1/2x11 speed shifting systems, so riders can benefit from smoother and more dependable shifting performance thanks to its X-Bridge design. Boasting a construction that's 25% stronger than KMC's standard chains, this model is also equipped with a EcoProTeQ technology (EPT) anti-rust coating, which gives it additional protection against rust and corrosion. Coming complete with an oversized, reinforced pin design and diamond level durability, this is a great choice of upgrade for reliable shifting on every E-bike adventure. Technologies: EPT: Rust Protection Redefined: The non-toxic, environmentally friendly EcoProTeQ technology EPT from KMC protects chains against corrosion (only after 650 hours of salt spray test the first traces of rust develop) for twice as long as conventional rust protection and thus sets new standards. Each component of every chain link is treated separately with EPT. This means a 100% coating that offers the lowest possible attack by water, salt and air humidity. Another characteristic of EPT is its very smooth surface gives chains excellent running qualities. Dirt build-up is minimised in the long term, which means that chain maintenance is significantly relieved. - Optimised for KMC E-chainrings. - 25% stronger than KMC's standard chains. - Oversized reinforced pin design. - Diamond level durability. Manufacturer's Part Number: BE11TEP36
The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP’s Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles’ Heels” of narrow/wide designs. Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium. Wave Chainring Technology Advancements The MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability. - 50mm (standard). - Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth. - Alternating lateral force to each chain link to actively retain links to the ring. - Less surface contact between chainring and chain creating minimal friction and maximum retention. - Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance. - Tooth design allows for reduced weight chainrings over competitor technology. Manufacturer's Part Numbers: CRMRWR28 Black 28T 9/10/11 Speed CRMRWR30 Black 30T 9/10/11 Speed CRMRWR32 Black 32T 9/10/11 Speed CRMRWR34 Black 34T 9/10/11 Speed CRMRWR36 Black 36T 9/10/11 Speed
The Park Tool Chain Gang chain cleaning system contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. It contains a CM-5.3 Cyclone Chain Scrubber, GSC-1 GearClean Brush and 8 oz. bottle of Bio ChainBrite.
The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP’s Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles’ Heels” of narrow/wide designs. Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium. Wave Chainring Technology Advancements The MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability. Technological features and benefits include the following: - 49mm (standard) chainline - Tooth faces displaced from nominal centerline to provide active and positive lateral engagement of every chain link with a chainring tooth. - Alternating lateral force to each chain link to actively retain links to the ring. - Less surface contact between chainring and chain creating minimal friction and maximum retention. - Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance. - Tooth design allows for reduced weight chainrings over competitor technology. Manufacturer's Part Numbers: CRMRWG28 Black 28T 9/10/11 Speed CRMRWG30 Black 30T 9/10/11 Speed CRMRWG32 Black 32T 9/10/11 Speed CRMRWG34 Black 34T 9/10/11 Speed CRMRWG36 Black 36T 9/10/11 Speed
The universal design of the Park Tool crank puller has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive™, Octalink®) crank arms. Also fits BNI cranks on Bosch® electric bikes (E-Bikes). The CWP-7 is made for the 22 x 1mm threading in common cranks.
This chain scrubber cleans bicycle chain quickly, easily, and effectively - without the hassle and mess of removing the chain from the bike. The Park Tool Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts.
The fine thread, special "V"-shaped handle, and super strong replaceable pin make chain removal and installation a breeze. The Park Tools CT-5 works on any bicycle chain (including Hyperglide®) and has a "shelf" for loosening tight links. At only 77 grams, it's the perfect take-along chain tool. Also works on 9 speed chains as well.
Ditch your single ring and fall back into the loving embrace of two-by technology. The TRS Dual Guide will keep your 2X system silently secure on the most demanding rides. Run with the included standard lower slider, it's perfect for those riders who want the lightest dual ring chain retention possible.