A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The CG-2.4 contains everything needed to quickly and easily clean the chain cogs and chainrings: CM-5.3 CYCLONE™ CHAIN SCRUBBER Clean bicycle chains quickly easily and effectively without the hassle and mess of removing the chain from the bike. The CM-5.3 uses an extra-large solvent reservoir and a series of four rotating brushes to get chains sparkling clean inside and out. A magnet at the bottom of the CM-5.3's solvent reservoir draws away particles scrubbed from the chain effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the CM-5.3 reducing drips and mess. The CM-5.3 can handle any bike-specific chain from wide 3/16' single-speed* to narrow 12 and 13-speed. A reversible handle allows the chain to pass through forwards or backwards for compatibility with center drive e-bikes. CB-4 BIO CHAINBRITE Park Tool CB-4 is a 100% biodegradable natural plant-based degreaser formulated for use in the CM-5.3 Cyclone Chain Scrubber CM-25 Professional Chain Scrubber or with a scrubbing brush as a general purpose degreaser. When used with a chain cleaner CB-4 gets bicycle chains clean inside and out so they're good as new. Will not harm alloy plastic rubber or carbon fiber parts so it's safe to use for cleaning cassettes chainrings pulleys or any other component that accumulates muck and grime. GSC-1 GEARCLEAN™ BRUSH The GSC-1 is specially designed to free your bicycle drivetrain from muck and grime. The comfortable handle features a contoured toothed end to reach dirt deep between the gears and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and cassette. Also works great on derailleur pulleys brakes or other places where dirt collects. CG-2.4 FEATURES The Chain and Drivetrain Cleaning Kit includes: CM-5.3 Cyclone™ Chain Scrubber GSC-1 GearClean™ Brush 8 oz. bottle of Bio ChainBrite™ The CG-2.4 works on nearly any bike including multi-speed single-speed and e-bikes. INCLUDES: CM-5.3 Cyclone™ Chain Scrubber — Instructions GSC-1 GearClean™ Brush CB-4 Bio ChainBrite™ — Instructions
Park Tool Chainring Nut Wrench (CNW-2)Install and remove chainrings with ease thanks to the Chainring Nut Wrench from Park Tool. Benefiting from a double-ended design to fit most slotted-type nuts, its design prevents spinning when tightening. The ideal tool for your cycle workshop. Features:The outer width of both ends of the CNW-2 are nominally 12mm wideOne end has a two outer tips nominally 2.7mm wide each, and the other end has tips of 3.8mm eachCompatibility: Double-ended to fit most slotted-type nutsBlade Thickness: 1.35mmNote: The CNW-2 replaces the CNW-1Weight: 19.6gBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool chainring wrench tool is very simple to use and can save valuable time during chainring changes.
A chain lube from Park Tool, the leader in bicycle maintenance productsUsing PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditionsIt penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosionCan also be used to good effect on cables, spoke nipples, and derailleur and brake pivots4 oz. / 120 mm Bottle
The Park Tool CL1 is a chain lube from Park Tool, the leader in bicycle maintenance products. Using PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Also works great on cables, spoke nipples, and derailleur and brake pivots.Chain Lube from Park ToolPTFE and a Proprietary Blend of OilsWorks Great in Wet or Dry ConditionsPenetrates, Reduces Friction, Prolongs Component LifeProtects Parts from Rust and CorrosionSuitable for Cables, Spoke Nipples, Derailleurs and Brake Pivots
Key Features: Cleans bicycle chain quickly, easily, and effectively without the hassle and mess of removing the chain from the bike, The Cyclone™ uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts, Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes, The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes, Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain, Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess, Sturdy handle makes the Cyclone™ easy to use and control, Holds 2 fluid ounces (59ml) of solve.
Cleans bicycle chain quickly easily and effectively without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir hundreds of rotating bristles and a two-step cleaning process to get chains really clean improve shifting performance and extend the life of the chain and other expensive drivetrain parts. Works with all multi-speed bikes (5 6 7 8 9 10 11 and 12-speed) as well as some single-speed models and e-bikes The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain Special wicking sponge draws solvent from the chain as it exits minimizing drips and mess Sturdy handle makes the Cyclone™ easy to use and control Holds 2 fluid ounces (59ml) of solvent
The new CM-5.3 Cyclone Chain Scrubber from Park Tool cleans your bicycle chain quickly, easily and effectively without the hassle and mess of removing the chain from the bike.Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikesStrong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chainSpecial wicking sponge draws solvent from the chain as it exits, minimizing drips and messSturdy handle makes the Cyclone easy to use and controlHolds 2 fluid ounces (59ml) of solventThe Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. It works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes.Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain and a special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess. The sturdy handle makes the Cyclone easy to use and control.
The Park Tool CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts.
The CNW-2 makes chain ring bolt installation and removal easyIt securely holds the slotted nut to prevent spinning when tightening or loosening the boltDouble-ended to fit most slotted-type nuts
The Park Tool CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. The unique "floating tip" ensures smooth operation and long life. As with most Park Tool products, it also features a hole specifically designed for hanging on a tool wall.
This crank wrench will be of benefit to any profession or amatuer mechanics toolbox.