Note: Listing is for a Front wheel only Zipp’s 303 S Tubeless Disc Brake wheelset provides today’s cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. Road bikes are more versatile than ever, no matter the road surface, but just as fast as before. The 303 S offers an entirely new rim profile and design to optimize rider performance on this new breed of bike. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. The 303 S borrows design concepts from the higher-level 303 Firecrest Tubeless Disc-brake wheelset to gain speed through increased efficiency. That is achieved by creating a wheel with reduced: Wind resistance, rolling resistance, rider fatigue, and weight. The key innovation is in the 303 S Series’ rim design. Its 45mm rim depth is the same as its predecessor, the 302 Disc brake. But its rim width is 2mm wider, at 27mm, and its tire bed is a full 7mm wider, at 23mm. That rim platform is designed to be the fastest with a 28mm tire. The wide rim optimizes tire profile to allow lower tire pressure. That helps to reduce rolling resistance and provides a more compliant ride. The result of all this is a 10 percent watt savings vs. a top peer wheel in total power required to ride 40kph on a smooth flat road with a 28mm tire, according to internal Zipp testing. This groundbreaking wheelset also features all-new cosmetics, setting the rider apart from the pack, and comes at an attractive price. Key Features: Zipp graphics and cosmetic identity that scream speed, Fastest with 28mm, fits wide gravel tires as well, 76 / 176 DB hubs with Center locking interface, XDR driver body option, Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increase grip for confident cornering, descending, and handling in wet conditions., Lower tire pressures and larger volume provides a compliant ride with fewer vibrations., Significant watt savings when running larger tires at lower pressure., Wide hookless rims create a seamless transition to the tire, reducing drag., . Specification: Orientation (wheels): Rear, Size (wheels): 700c, Rim construction: Carbon, Tire compatibility: Clincher Tubeless Ready, Rim depth: 45mm, Surface texture: Smooth, Brake compatibility: Disc (Center Lock), Rim - inside width: 23mm, Rim profile: Symmetrical, Rim finish: UD fiber / Bake-On labels / Matte clear coat, Color (Decal): Standard, Nipple material: Brass, Nipple anti-rotation: Sapim Secure-Loc, Spoke type: CX-Sprint, Spoke count: 24, Spoke pattern: 2 Cross, Hub: 176D, Color (hub): Black, Axle type (Wheels): TA 12x142, Axle material: Aluminum front & rear, Bearings: Cartridge - Stainless Steel, Driver Mechanism: 3 Pawls Leaf Spring, Driver body material: Aluminum, Max tire pressure: 73psi, Max recommended rider weight: 250lbs, .
Pro-Lite Revo A21W Centre Lock Road WheelsetThe Revo A21W Alloy Road Disc Brake Wheelset is a disc brake specific wheelset from Pro-Lite, which features the 6-Bolt hub mount for disc rotors and stylish low profile sleeved rims.Stable and Consistent Braking ResponseThese wheels offer the perfect mix of low rotational mass, strength, and lightning fast acceleration. The Pro-Lite Revo wheels are perfect for winter training, even more so when the weather is bad and will offer exceptional performance for cyclo-cross events where braking response time and consistency are crucial. These wheels offer reactive and high-performing brake output straight away, also after long and fast winding descents and likewise at the end of a muddy off-road session.Exceptional All-RounderThese hubs have been designed to be used with the 6-Bolt disc rotor setup, which provides superb performance and easy maintenance. When this is combined with the strong rim and the Sandvik aero bladed spokes, Pro-Lite have created a wheelset that features the durability and performance to withstand terrain associated with Cyclocross and bad weather. Yet when on the open road it rolls with perfect efficiency and stability, making it a truly exceptional all-rounder.Features:Rims: Rim Type: Sleeved Alloy 6061, clincher tubeless ready Rim Finish: Shot peened Rim Depth: 21mmSpokes: Spoke Count: Front: 28; Rear: 32 Spokes: Aero-bladed Sandvik Stainless Steel Lacing: 3-crossFront Hub: Bearings: 2 (Japanese EZO) Disc Brake Mount: 6-Bolt Axle Width (O.L.D.): 100mm Skewer Type: QR or 15mm with adapters (supplied) Weight: 756g (w/o skewer)Rear Hub: Bearings: 4 (Japanese EZO) Disc Brake Mount: 6-Bolt Freehub Type: Shimano 9, 10, 11-Speed Freehub Switchable: Yes Freehub Material: Alloy Axle Width (O.L.D.): 135mm Skewer Type: QR or 12mm with adapters (supplied) Weight: 888g (w/o skewer)Buy Pro-Lite Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
High performance carbon laminate road racing disc brake wheels meets the demands of today's professional and amateur riders Smooth surface carbon and alloy tubeless ready clincher rim is both light weight and rigid Easy to use Centre-Lock rotor mount for use with disc brakes Front and rear 28 mm rim height Stainless steel butted and bladed straight pull spokes for optimal balance and rigidity (OPTBAL) High lateral rigidity is improved with a wide flange spacing Labyrinth double contact sealing - low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothness Polished bearing races reduce friction and provide for smooth rotation Cold forged and machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimum 8, 9, 10 and 11-speed compatible 700C tubeless clincher compatible For 100 x 12 mm front and 142 x 12 mm rear axles Brake Type: Disc Colour: Black Rim Type: Clincher Wheel Diameter: 700c Product Type: Wheelsets
WH-R9170 TL carbon clincher disc brake wheel, designed to meet pro road race criteria. Key Features: Lightweight clincher full carbon 40 mm deep 24 mm wide rim for improved aerodynamics, increased rigidity and excellent inertia Easy to use Centre-Lock rotor mount for use with disc brakes 24 stainless steel butted (2.0-1.8-2.0) and bladed straight pull spokes Elbow-less spokes make for a strong yet compliant wheel High lateral rigidity is produced with a wide flange spacing Labyrinth double-contact sealing effectively shuts out water and dirt Alloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces friction Quick and easy to maintain bearing adjustment Cold forged, machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimum 700C clincher (tubeless compatible), 23 - 32C For 100 x 12 mm axle Average weight 707 grams
Image is for illustration purposes only.You need a road disc wheelset? Tubeless Ready and super light? CXD4 is your first choice!RIM:Designed disc only -for the latest road and cross bikes,Tubeless ready design,Sleeve joint,Offset profile – makes a stronger wheel.SPOKES:Stainless steel BLK spokes,24h front wheel – 2 cross lacing,24h rear wheel – 2 cross lacing.HUB:Lightweight AL7075 body,Lightweight aluminum axle,Low resistance sealed bearings – 2 in the front hub and 4 in the rear,Compatible with 8, 9, 10 & 11 spd,Centerlock,Front wheel thru axle 12mm 100,Rear wheel thru axle 12mm 142.WEIGHT:700C: 1536g.
Built around the traverses of the Enduro World Series our Vortex wheels redefine what Enduro wheels are.With a generous 33mm internal width Vortex wheels increase tyre volume and maximise the available grip on offer. Using an asymmetric design we have equalised spoke tensions and built a package that leaves descents in its wake, whilst cutting down weight where it isn’t needed for energy sapping climbs. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Vortex offers offset wheel benefits, without compromise.At the core of our Vortex wheels are our all new instantaneous 120 point pick up, MTC Supadrive Boost and MTC Front Boost hubs, with center lock disc mounts, sealed bearings and super wide spaced flanges for increased stiffness and durability.100% hand built and pre fitted with tubeless tape, Vortex wheels are tubeless ready from the box.
Mavic Crossmax SL Centre Lock MTB WheelsetFeaturing a high-quality maxtal aluminium rim construction, this wheelset offers exceptional strength and durability for cross country (XC) riding and racing. Each rim is made using Mavic's patented Fore technology, which uses a fully sealed upper bridge to eliminate the need for rim tape. This saves 30g per wheel as well as not having the hassle of using tape to set up tubeless tyres. This model's rims also feature a 25mm internal rim width with a robust hookless profile. Coming finished with Black Shield technology for an eye-catching appearance on your ride, its finish provides additional protection against scratches and abrasions.Cross Country Wheelset with Boost Axle SpacingDeveloped to handle the demands of modern XC disciplines, this wheelset is kitted out with Boost axle spacing that delivers stronger and stiffer rolling performance, allowing you to charge hard through rock gardens, tree roots and debris. Mavic has also equipped it when 24 straight-pull spokes for a dependable connection between each rim and hub for greater efficiency. Thanks to its Instant Drive 360 freewheel with the automatic bearing preload adjustment (QRM), it provides fast engagement and smooth performance on the toughest of rides.UST Tubeless Ready and Centre Lock Disc Brake CompatibleBoasting a tubeless-ready design, this cross country wheelset allows you to benefit from tubeless advantages such as the ability to run lower tyre pressures for greater stability on rough terrain, lower rolling resistance and fewer risks of flats or punctures. Coming complete with Centre Lock disc brake compatibility, the Mavic Crossmax SL Disc MTB Wheelset offers powerful and consistent braking as you stay focused on the finish line.Features: Rim Material: Maxtal Aluminium with Fore technology Finish: Black Shield rim protection Axle: Front: 15x110mm; Rear: 12x148mm, Boost Use: Mountain Bike (MTB), Cross Country (XC) Inner Rim Width: 25mm Rim Profile: Hookless profile ETRTO: 25-622 Wheel Size: 29" Recommended Tyre Size Optimised for tyres from 2.1" to 2.3" Tyre Compatibility: Hookless compatible tubeless tyres Spoke Type: Straight-pull Spoke Count: 24 Hubs: Infinity Bearings: Auto bearing preload technology (QRM) Freehub System: Instant Drive 360 Freehub Compatibility: Micro Spline Brake Type: Centre Lock Disc brake ASTM Category: 3 Rider Weight Limit: 120kg Tubeless Ready: Yes, UST tubeless Single or Pair: Pair Weight: 1695gManufacturer's Part Number: LP1604100 Black Black 29" 29" Micro SplineBuy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
In 1994 DT Swiss launched the original Hügi ratchet rear hub, a marvel of Swiss precision engineering that set new standards for reliability and quality in the industryDT's twin-ratchet 240 is now an established gold standard for lightweight and reliable rear hubs but time doesn't stand still and with 25 years of research, development and production experience behind them, it was time for DT Swiss's engineers to look again at the technology DT pioneered so many years agoThe result is the new generation of 240 hubs with Ratchet EXP, an even more refined and evolved ratchet system, by moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance,The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability, truly the finest hubs DT have ever made,The extensively machined hub shell, axle and end caps contribute to make these the lightest 240 hubs yet with no reduction in performance or long term durability,As with previous generations, the Ratchet EXP system is designed around a No-Tool system making servicing simple, further aided by new easy to remove, machined end caps,Custom made DT steel bearings offer the same near legendary long term durability and ease of replacement that the 240 has always been known for,Weights start at just 294 grams a pair.
Mavic Crossmax XL Centre Lock MTB WheelsetProviding speed, confidence and control on rugged terrain, this mountain bike (MTB) wheelset features a durable aluminium maxtal rim construction that's ideal for handling all the challenges that the trails have to offer. Mavic has also kitted out each rim with a special Black Shield treatment, which protects against impacts and scratches when the terrain gets tough. In addition, its 30mm wide profile is specifically optimised for running lower tyre pressures, so you can benefit from a smoother ride with superior traction and control. Coming complete with the brand's most user-friendly tubeless system as well as Centre-Lock disc brake compatibility, this wheelset is a great upgrade for riders who want increased protection against flats and dependable braking performance, wherever their next adventure takes them.Tapeless, Tubeless Fore TechnologyThis MTB wheelset's rims are made with Mavic's patented Fore technology, which features a fully sealed upper bridge that eliminates the need for rim tape. That saves 30 grams per wheel and does away with the hassle of using tape to set up tubeless tyres. The rim also has a 30mm internal width, perfect for optimising the performance of any modern trail tyre. It's engineered with a super-strong triangular shape and designed specifically to absorb impacts from the trail. Mavic's Black Shield technology gives them a distinctive finish that protects against scratches and abrasions.Stiffer and Lighter MTB WheelsetMavic uses 24 straight-pull spokes in this trail-ready wheelset to further dial in the sweet spot between lateral stiffness and vertical compliance. The Infinity hubs also feature a stiffer and lighter construction that's enhanced by the ultra-reliable ID360 double ratchet system for fast engagement. This version is set up for Centre-Lock disc mounts and is compatible with Micro Spline. Finally, the Mavic Crossmax XL Disc MTB Wheelset is available in either 27.5” or 29” and ships with UST tubeless valves, spare spokes and accessories.Features: Rim Material: S6000 Aluminum Maxtal, Asymmetrical rim design Finish: Black Shield treatment (protects against impacts and scratches) Spoke Material: Steel Use: MTB Internal Rim Width: 30mm ETRTO: 27.5": 584x30TC; 29": 622x30TC Tubeless Ready: Yes, Fore tapeless tubeless technology Tyre Compatibility: UST Tubeless and Tube type Brake Type: Disc brake, Centre-lock Recommended Tyre Sizes: 60mm to 76mm (2.35" to 3.0") Front Axle: 15x110 Boost thru-axle Rear Axle: 12x148 Boost thru-axle Freewheel: Micro Spline Hub Technologies: Infinity Hubs, Instant Drive 360 freewheel technology Spoke Count: Front and Rear: 24 Spoke Lacing: Front and Rear: Crossed 2, contactless Spoke Shape: Straight pull, flat, double-butted Spoke Nipples: Fore integrated Aluminium ASTM Category 4: Enduro and trail-riding Included: Fore adjustment wrench, 2x replacement spokes with each wheel, multi-function adjustment wrench (delivered with rear wheel), UST valve and accessories Max Rider Weight: 120kg (including bike) Weight: Pair: 27.5": 1830g (Front: 850g; Rear: 980g); 29": 1930g (Front: 900g; Rear: 1030g)Manufacturer's Part Numbers:LP1627100 Black 27.5" Micro Spline (Crossmax XL 27,5 DCL Pr Bst MS*)LP1624100 Black 29" Micro Spline (Crossmax XL 29 DCL Pr Bst MS*)Buy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)