The Wildcat mountain bike shoe is the cool bigger cousin of the Livewire. Featuring cranked-up stability and ankle protection, it's a mid-height, sticky-soled, flat pedal brawler. Features: Rubber Kinetics | DST 6.0 HIGH GRIP Rubber Outsole. D3O High Impact Zone Insole Technology. Durable, synthetic upper with anti-abrasion mesh. Anti-abrasion toe protection. EVA midsole provides support and shock absorption. Fully gusseted tongue prohibits intake of dirt and debris. Modern lifestyle Performance Fit. Approximate weight - 14.6 oz (418 g).
Dave Fisher, Profile’s head machinist, has created these limited edition, drilled out, Profile Mini Hubs. The Cats Eye Hubs have the same internals and hardware options as the Mini Hubs. Hand made in the USA! The Profile Mini cassette sets the benchmark for cassette hubs and was the first BMX cassette hub. Refined over the years the hub features a heat treated 6061 aluminium Shell which houses a heat treated Chromoly internal axle and precision sealed bearings. The hub uses the bullet proof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. ###section### Product Specs HUB TYPE: Cassette AXLE: Male DRIVER: 9T DRIVE SIDE: Right Side Drive SPOKE HOLES: 36h WEIGHT: TBC
Dave Fisher, Profile’s head machinist, has created these limited edition, drilled out, Profile Mini Hubs. The Cats Eye Hubs have the same internals and hardware options as the Mini Hubs. Hand made in the USA! The Profile Mini cassette sets the benchmark for cassette hubs and was the first BMX cassette hub. Refined over the years the hub features a heat treated 6061 aluminium Shell which houses a heat treated Aluminium internal axle and precision sealed bearings. The hub uses the bullet proof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. ###section### Product Specs HUB TYPE: Cassette AXLE: Male DRIVER: 9T DRIVE SIDE: Left Side Drive SPOKE HOLES: 36h WEIGHT: TBC
Dave Fisher, Profile’s head machinist, has created these limited edition, drilled out, Profile Mini Hubs. The Cats Eye Hubs have the same internals and hardware options as the Mini Hubs. Made in the USA, the Profile Mini hub features a low flange hub shell machined from heat treated 6061 aluminium spinning on two precision sealed bearings. The hub features a 7075 aluminium centre axle and steel capped cone washers to grip this hub in your forks better. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36 BEARINGS: Sealed WEIGHT: TBC
Prime Road Chain CatcherThis chain catcher is specifically designed for the demands of modern road cycling. It features a hard-wearing alloy construction, which makes it durable and reliable on every mile of road. Prime has also equipped this model with an anodised finish for additional protection against corrosion when cycling in all-weather conditions. This makes it a strong choice of upgrade for preventing your chain falling off on a double road crankset and getting stuck between your inner chain ring and frame. Perfect for protecting your frame as well as giving you a confidence boost, it weighs in at only 6g for lightweight and dependable performance.Features: Material: Alloy 6061 Finish: Anodised Use: Road Weight: 6g (including 7075 Aluminium bolt)Manufacturer's Part Numbers: Black: PRCCB Gold: PRCCG Red: PRCCRBuy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Road Chain CatcherThis chain catcher is specifically designed for the demands of modern road cycling. It features a hard-wearing alloy construction, which makes it durable and reliable on every mile of road. Prime has also equipped this model with an anodised finish for additional protection against corrosion when cycling in all-weather conditions. This makes it a strong choice of upgrade for preventing your chain falling off on a double road crankset and getting stuck between your inner chain ring and frame. Perfect for protecting your frame as well as giving you a confidence boost, it weighs in at only 6g for lightweight and dependable performance.Features: Material: Alloy 6061 Finish: Anodised Use: Road Weight: 6g (including 7075 Aluminium bolt)Manufacturer's Part Numbers: Black: PRCCB Gold: PRCCG Red: PRCCRBuy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Road Chain CatcherThis chain catcher is specifically designed for the demands of modern road cycling. It features a hard-wearing alloy construction, which makes it durable and reliable on every mile of road. Prime has also equipped this model with an anodised finish for additional protection against corrosion when cycling in all-weather conditions. This makes it a strong choice of upgrade for preventing your chain falling off on a double road crankset and getting stuck between your inner chain ring and frame. Perfect for protecting your frame as well as giving you a confidence boost, it weighs in at only 6g for lightweight and dependable performance.Features: Material: Alloy 6061 Finish: Anodised Use: Road Weight: 6g (including 7075 Aluminium bolt)Manufacturer's Part Numbers: Black: PRCCB Gold: PRCCG Red: PRCCRBuy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This chain catcher is developed for the rigours of modern road cycling. It features a hard-wearing alloy construction, which makes it durable and reliable on every mile of road. Prime has also equipped this model with an anodised finish for additional protection against corrosion when cycling in all-weather conditions. This makes it a strong choice of upgrade for preventing your chain from falling off on a double road crankset and getting stuck between your inner chainring and your bike's frame. It's perfect for protecting your frame as well as giving you a confidence boost, plus it weighs in at only 6g for lightweight and dependable performance. This component is recommended for use with "braze-on" type front derailleurs (or Braze-On Front derailleurs when used with a Band-On front derailleur adapter). It is installed between the front derailleur and your frame's seat tube. Manufacturer's Part Numbers: Black: PRCCB Gold: PRCCG Red: PRCCR
Get your filthy ride race ready with this starter pack containing 1 Litre of LoamFoam, 500ml of Foaming Drivetrain Degreaser and 120ml of LinkLube chain lube. Representing a saving over buying each of the separate items individually, there's no easier way to get started with the basics!LoamFoam Bike Cleaner - Peaty's LoamFoam is a minty fresh, professional-grade, biodegradable cleaner that is tough on dirt yet safe to use on all bike surfaces including carbon, brake pads and disks. LoamFoam s unique cleaning formulation is blended with organic gelling agents, allowing the active cleaning compounds to cling to your bike for longer. The result is a shiny clean steed with minimal effort.Foaming Drivetrain Degreaser - Peaty's Foaming Drivetrain Degreaser is the ultimate bike specific, high strength foaming drivetrain degreaser. Our powerful biodegradable formula has been designed to be tough on grime for fast and powerful drivetrain degreasing, while remaining kind to the rest of your bike and the environment.LinkLube Dry Weather - LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions.Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain.The Packaging - All Peaty s cardboard is uncoated (no glossy polymer coatings here) and made from a minimum of 70% recycled material. Some virgin material is always required to give the papers the strength. The packaging company is FSC certified which means all the virgin materials are sourced from sustainable and managed forests. We use single black print to make recycling as easy as possible once disposed of.
Key Features: The DT-3i.2 Dial Indicator Set bolts directly to the DT-3 allowing for greater accuracy and a way to measure results,Now includes an elongated, cylindrical tip that is large enough to work around voids in most rotors.
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fastIf the 1% side fits into the chain, the chain is worn out and should be replaced immediatelyMade from precision, laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
Optional add on for TS-2.2 and TS 2 truing stand to offer incredible accuracy for building and truing wheelsMeasures a wheel's lateral and radial run-out to .01 mmMounts easily to any TS-2 or TS-2.2 Truing StandEnables user to set and follow tolerances for each wheelIncludes two dials mounting brackets and specially designed tips