Genuine DVO spare parts.Compatible with: Diamond, Diamond Boost, Beryl
The Effetto Mariposa Mangiacatena Chain Cleaner is for quick and effective chain cleaning without the need to remove the chain from the bike, use a chain cleaning tool rather than simple brushes.Effective chain cleaning toolSix rotating brushes clean deep in to chainSturdy handleDual direction design, great on e-bikesReplacement brush kit availableWorks on 5 speed chains, up to 13 speedsMaximum chain width 9mmAlso suitable for single speed transmissionsThe Mangiacatena (Translation: Chain Eater) will thoroughly de-grease and clean the whole chain. It is the tool of its type to be equipped with lamellar (finned) elements at both ends, meaning the degreaser is contained when the chain is moved in either direction. This saves on degreaser, is less messy and very useful on many ebikes where only pedalling forwards moves the chain.Once the tool is assembled around the chain, degreaser is added to the fill level (Effetto Allpine Extra recommended). The chain follows a simple, low resistance path straight through Mangiacatena. First it is squeezed at both ends by the plastic fins then scrubbed clean by six rotating brushes which get soaked in the degreaser.For best results move the chain ten times through Mangiacatena with the tool installed below the Chainstay then repeat with it mounted above the Chainstay. Dispose of the dirty degreaser correctly then repeat the first stage but with water to rinse the chain and brushes. Finally dry the chain with a clean cloth before re-lubrication.
The Mangiacatena Replacement Kit is a genuine replacement parts kit for refreshing the internal parts on the Mangiacatena chain cleaner. It includes all brushes and the two lamellar elements, and it is easy to assemble for prolonged service life. This kit allows you to replace the parts subject to normal wear of Mangiacatena, extending its lifespan. Replacing the brushes inside the Mangiacatena is very simple. For lamellar elements, which are glued, it may be necessary to use a cutter or flathead screwdriver to remove the old elements. To glue the new ones, Effetto Mariposa recommends using normal hobby glue or glue for repairing inner tubes. Leave to dry for a few hours before using Mangiacatena.
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
Effetto Mariposa Mangiacatena Replacement KitThe Mangiacatena Replacement Kit from Effetto Mariposa is a direct replacement parts kit for refreshing the internal parts on the Mangiacatena chain cleaner. It includes all brushes and the two lamellar elements, and it is easy to assemble for prolonged service life.This kit allows you to replace the parts subject to normal wear of Mangiacatena, extending its lifespan.Replacing the brushes inside the Mangiacatena is very simple. For lamellar elements, which are glued, it may be necessary to use a cutter or flathead screwdriver to remove the old elements. To glue the new ones, Effetto Mariposa recommend using normal hobby glue or glue for repairing inner tubes. Leave to dry for a few hours before using Mangiacatena.Features: Contains all brushes and two lamellar elements Easy to assembleBuy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Mangiacatena Chain CleanerThe Mangiacatena Chain Cleaner from Effetto Mariposa is a durable, efficient and fast acting chain cleaning device that scrubs deep into chain links. This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains.If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle.Chain Cleaning with Minimum WasteThere is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvent is wasted without getting to a deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike.Please Note: Reducing the amount of solvent used doesn't mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside.Deep Cleaning FormulaThe chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively remove dirt on each side, pushing the solvent inside the chain.Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it's perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended keeping the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. At the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa have selected Mangiacatena materials and construction for a long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistanceFor Single-Speed Transmissions and 5 to 13 Speed ShainsThe chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.Features: The best way to clean the chain with minimum consumption of degreasing liquid The lamellar elements at both ends retain dirt and liquid inside Mangiacatena, while the six rotating brushes - continuously wet with degreaser - also act mechanically on the chain It can be used both on the lower and upper part of the chain, pedaling in both directions Degreasing liquid or water can be added from above, without the need to open Mangiacatena Made of shockproof and solvent resistant plastic. It can be refurbished with the appropriate replacement brush kit It works with single-speed transmissions (maximum chain width: 9 mm) and 5 to 13 speed chains Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The essential items needed to keep your bike looking good and running smoothly.Kit Contents:Bike Cleaner 1 litre.Concentrated Bike Cleaner 95ml.Chain Lube 100ml.Fenwick’s “ready to use” biodegradable Bike Cleaner comes in a 1 litre ergonomically designed trigger bottle and works by attraction to dirt molecules, surrounding them, and making them easy to rinse away. Fenwick’s Bike Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use across all types of frame finishes eg matt, carbon or gloss, leaving a clean, contaminant-free surface.The Concentrated Bike Cleaner (95ml) can be diluted to make another 1 litre of Bike Cleaner when you’ve run out, or can be used neat in chain baths for efficient, safe degreasing.Best applied to a chain that has been degreased with Fenwick’s products, the environmentally friendly Fenwick’s Chain Lube will give great performance no matter what the weather. It’s designed not to pick up dust in dry conditions nor dirt in wet conditions, making it a great chain lube for everyday use.Please note: the Fenwick’s Essential Bike Cleaning & Lubrication Kit is aerosol-free, making it ideal for sending via mail as a gift.Box Dimensions:231mm wide x 225mm tall x 65mm deep.
When you drop into any mountain bike trail the Hellcat Pro MTB Cycling Shoes have all the sure-footed grip and support you need to inspire fast-riding confidence. Starting with the sole, this is the renowned Stealth® Marathon™ with Dotty tread pattern, giving you an unrivalled grip of the pedals. They also offer easy entry with clipless pedals so you can clip-in with no fuss and get up to speed without delay. Perfect for use with larger platform clipless pedals, a bigger cleat box aids with locating the cleat and clipping in and also when staying on the pedal while clipped out. Ideal for those moments flying into the roughest sections of trail if you haven't managed to clip back in yet. Cushioning and comfort are provided by the Boost™ Mid-sole, balancing pedalling efficiency with reducing feedback from the trail and impact energy transfer to the foot, reducing fatigue. A Poron® toe box keeps your toes safe from rock or stump strikes or those unplanned dabs at speed. No more bumps and bruises wreaking havoc with your feet. The fast-drying synthetic upper is instantly comfortable and gives improved turnaround times between wet rides, getting you back riding with dry shoes quicker. The lace closure with hook and loop strap makes getting a supportive and comfortable fit quick and easy. And it's reliable in all weathers. The choice of serious gravity racers everywhere, the Hellcat Pro are a World Cup ready shoe to let you get rowdy on any trail. Cleat Guidance These shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
To keep you confident and in control across any terrain, the Hellcat MTB Cycling Shoes feature the signature Stealth® C4™ rubber sole, with the instantly recognisable Dotty tread pattern, for all of the unsurpassed grip that Five Ten is renowned for. The clipless-pedal-friendly format makes for easy pedal entry and exit too. A larger cleat box ensures rapid clipping in with quicker cleat location, and plenty of room to keep your foot on the pedal when the trail gets rough and you hit a section clipped out. Secure and comfortable fitting is provided by the lace closure with hook and loop strap to keep you firmly fitted in the shoe and the laces out of the way. Cushioning and support are provided by the Boost™ Mid-sole and EVA insole, reducing buzz and taking the sting out of riding impacts. All-weather riding is possible with the coated leather upper shedding water and drying out fast for a quicker turnaround between rides. A superb shoe for the clipped-in gravity racer and rider. Cleat Guidance These shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
When you drop into any mountain bike trail the Women's Hellcat Pro MTB Cycling Shoes have all the sure-footed grip and support you need to inspire fast-riding confidence. Starting with the sole, this is Five Ten's well-proven Stealth® Marathon™ with Dotty™ tread. The combined efforts of the super-grippy compound and dot tread give you an unrivalled grip of any pedal body. Clip In. Clip out. Easy. The sole design also offers incredibly easy entry with clipless pedals. You can clip in with no fuss and get up to speed without delay - perfect for use with larger platform clipless pedals. A bigger cleat box aids with locating the cleat and clipping in and also when staying on the pedal while clipped out; ideal for those moments flying into the roughest sections of the trail if you haven't managed to clip back in yet. Soak up the Bumps Cushioning and comfort are provided by the Boost™ Mid-sole, balancing pedalling efficiency with reducing feedback from the trail and impact energy transfer to the foot, reducing fatigue. A Poron® toe box keeps your toes safe from rock or stump strikes or those unplanned dabs at speed. No more bumps and bruises wreaking havoc with your feet. Trail-Ready The fast-drying synthetic upper is instantly comfortable and gives improved turnaround times between wet rides, getting you back riding with dry shoes quicker. The lace closure with hook and loop strap makes getting a supportive and comfortable fit quick and easy. And it's reliable in all weathers. Lastly, in their ambitious efforts to end plastic waste, Five Ten have made the Women's Hellcat Pro with recycled materials. 20% of the pieces used to make the uppers are made with a minimum of 50% recycled content. A small but vital step, or pedal revolution, in the right direction for MTB sustainability. The choice of serious gravity racers everywhere, the Women's Hellcat Pro are a World Cup ready shoe to let you get rowdy on any trail. Cleat Guidance These shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
To keep you confident and in control across any terrain, the Women's Hellcat MTB Cycling Shoes feature the signature Five Ten Stealth® Marathon rubber outsole. In combination with the classic Dotty™ tread pattern, they offer a reassuring feel on all types of wide pedal bodies, even when you're not clipped in right away. The clipless-pedal-friendly format also makes for easy pedal entry and exit too. A larger cleat box ensures rapid clipping in with quicker cleat location, and plenty of room to keep your foot on the pedal when the trail gets rough and you hit a section clipped out. Secure and comfortable fitting is provided by the lace closure with hook and loop strap to keep you firmly fitted in the shoe and the laces out of the way. Cushioning and support are provided by the Boost™ Mid-sole and EVA insole, reducing buzz and taking the sting out of riding impacts. All-weather riding is possible with the coated leather upper shedding water and drying out fast for a quicker turnaround between rides. Lastly, in their ambitious efforts to end plastic waste, Five Ten have made the Women's Hellcat with recycled materials. 20% of the pieces used to make the uppers are made with a minimum of 50% recycled content. A small but vital step, or pedal revolution, in the right direction for MTB sustainability. Cleat Guidance These shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
Five Ten Hellcat Pro MTB Cycling ShoesIf you don't hold back on the trail and love to ride hard in downhill and enduro races, the tough and grippy Five Ten Hellcat Pro MTB Cycling Shoes will fill you with confidence as you fly down the trails. When you're on the pedals, the renowned Stealth® Marathon™, with the famous Dotty tread pattern, ensures you enjoy the very best level of grip and security on your pedals and when hiking up to session a trail section. With their larger than standard cleat box, you'll also find clipping in is quick and easy. The grippy sole also keeps you in control if you need to ride clipped out for a moment. Ideal for those moments flying into the roughest sections of trail, taking a quick dap before you clip back in. The fast-drying synthetic upper gives improved turnaround times between wet rides. Maximum fit, security and support are provided by the lace closure with hook and loop strap. Cushioning and comfort are provided by the Boost™ Mid-sole, balancing pedalling efficiency with reducing feedback from the trail and impact energy transfer to the foot, reducing fatigue. A Poron® toe box keeps toes safe from rock or stump strikes or those unplanned dabs at speed.The choice of serious gravity racers everywhere, the Hellcat Pro are a World Cup ready shoe to let you get rowdy on any trail. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Coated leather upperAbrasion-resistant upper weldings for protectionStealth® C4™ rubber for unbeatable grip and ease of entry on clipless pedalsBoost™ Mid-soleLace and hook and loop closure for added supportMoulded socklinerPerforated EVA tongue with mesh overlay2-bolt cleat compatible (cleats not supplied)Buy Five Ten Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.