It’s time for road safety to run ‘round the clock. Introducing the Rapid X2 Kinetic, a movement-sensitive, day and nighttime light for your ride. The Rapid X2 Kinetic is a 50-lumen, USB rechargeable safety light that mounts easily on your seatpost. A built-in accelerometer automatically switches into a constant burst mode when it senses a sudden change in speed. Similar to daytime running lights on an automobile, the Rapid X2 Kinetic helps make your presence known as a cyclist. 180 degrees of visibility allows you to be seen from varied perspectives. A Battery Auto-Save feature makes sure you’re covered the entire ride by automatically switching to a flashing mode should the battery run low. With up to 30 hours of runtime, the Rapid X2 Kinetic ensures you’ll be drained from your ride long before your light is. Click here for The Rapid X2 Kinetic Manual. Click here for more information about Lithium-ion batteries. Specifications Dimensions 74.4 x 30.5 x 32.9mm Weight 32 grams (light unit and battery) Light Source and Mode Run Time COB LED Low Mode: 5 Hour Run Time Flashing Mode: 30 Hour Run Time Rapid Mode: 16 Hour Run Time Recharge Time 2 Hours (USB 2.0) Mount Size Rubber band mount (fits φ 12.0-32.0mm) Other Kinetic mode, Battery auto save, Low battery indicator, Light mode memory
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
Effetto Mariposa Mangiacatena Chain CleanerThe Mangiacatena Chain Cleaner from Effetto Mariposa is a durable, efficient and fast acting chain cleaning device that scrubs deep into chain links. This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains.If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle.Chain Cleaning with Minimum WasteThere is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvent is wasted without getting to a deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike.Please Note: Reducing the amount of solvent used doesn't mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside.Deep Cleaning FormulaThe chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively remove dirt on each side, pushing the solvent inside the chain.Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it's perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended keeping the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. At the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa have selected Mangiacatena materials and construction for a long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistanceFor Single-Speed Transmissions and 5 to 13 Speed ShainsThe chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.Features: The best way to clean the chain with minimum consumption of degreasing liquid The lamellar elements at both ends retain dirt and liquid inside Mangiacatena, while the six rotating brushes - continuously wet with degreaser - also act mechanically on the chain It can be used both on the lower and upper part of the chain, pedaling in both directions Degreasing liquid or water can be added from above, without the need to open Mangiacatena Made of shockproof and solvent resistant plastic. It can be refurbished with the appropriate replacement brush kit It works with single-speed transmissions (maximum chain width: 9 mm) and 5 to 13 speed chains Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
A simple precision-made component that provides valuable insurance against front derailleur malfunctionsUsed to good effect by top professional riders in the Olympic games World Championships Tour de France Giro d'Italia Paris Roubaix and many moreIt acts a ramp to guide your chain and virtually eliminates the possibility of your chain dropping off the small chainring onto the bottom bracket helping to protect your frame and keep you in gearHighly recommended to prevent structural damage to carbon and aluminium frames but also protects the finish of any other frame materialComplete with all mounting hardware and longer bolts for Shimano Campagnolo and SRAM derailleurs including a radius washer with a secure mounting interface for effective performanceFits onto braze-on frame mounts or a clamp-on front derailleur mountDesigned to work with all double chainring bikesMade from 6061 T6 heat treated aluminiumFinished with a wet-look powdercoat paintAdds only 10 grams of weightK-Edge products are proudly CNC machined in the USA and have a Lifetime warranty: you break it well replace it
'After procuring the requisite saltwater taffy/mescaline composite Mick and Keith went for a jog in the black of night and came across a river so blue they could barely believe it.' Classic shape with new levels of style and performance. We designed these shades to look good and fit comfortably on your face whether you're haulin' ass down a mountain trail or drinking beers in a Mexican cantina. No Slip: special grip coating to help eliminate slippage when sweating. No Bounce: the frame is snug and light-weight with a comfortable fit to prevent bouncing while running. All Polarized: glare-reducing polarized lenses and UV400 protection that blocks 100% of those harmful UVA and UVB rays. All Fun.
QC TESTING To underline their quality and reliability Cateye products undergo the most stringent QC tests in the industry many of which exceed the requirements of CE. Also used in the Japanese auto industry Cateye’s testing equates to a return rate of less than 0.9% across the brand. OPTICUBE LENS TECHNOLOGY Cateye maximise the best beam pattern from any LED utilising superior lens and reflector technology to emit a higher quality light and beam pattern in front of the rider even with lower Lumen amounts. LONG PRESS TO TURN ON & OFF A feature appreciated by consumers to prevent accidentally switching on lights and loosing battery power. This feature also ensures that a light is not accidentally turned off during a ride. INTEGRAL HEAT DISSIPATION Superior heat dissipation maximises the lumen power of the light for consistency of lumen output. NEVER CYCLES THROUGH THE OFF MODE Cateye were the first to introduce this feature to avoid the rider being accidentally left in complete darkness while changing beam modes. REAR LIGHT FEATURES True 180 degree visibility; battery auto-save automatically changing to flashing mode to allow more time to finish the ride as opposed to being left in the dark. WEARABLE X An ultra low profile wearable LED with amazing brightness. Double ring COB LED technology 180 degree visibility Strong 35 Lm output multiple modes Weighs only 20g USB rechargeable battery Quick & easy to attach and detach Suitable for use on luggage and clothing Includes rubber band & clasp for bike mounting Recharging time: 2 hrs Mode: Output Runtime High: 35 Lm 1 hr Low: 3 Lm 10 hrs Flashing: 35 Lm 30 hrs Rapid: 10 hrs Pulse: 10 hrs Vibration: 10 hrs
The newest great value mid-range performance safety bike light set AMP200 Features: Compact rechargeable headlight (200 lm) Up to 30 hours runtime Three light modes (High / Low / Flashing) Features - Easy to attach and remove, new & improved rubber band mount with 360° rotation. Excellent side visibility Low battery indicator Lithium-Ion USB rechargeable battery (Micro-USB cable included) Mode memory function Three light modes (High / Low / Flashing) Weight: Only 62g Designed in Japan Runtime: High (200 lumens): 1.5 hrs Low (40 lumens): 13 hrs Flashing (200 lumens): 30 hrs Charging time (From empty): 2.5 hrs AMPP200 Instruction Manual ViZ100 Features: 3 LEDs (100 lumens) Focused lens for maximum visibility Highly visible during daytime Superior 300 degree visibility Long rear beam projection OptiCube™ lens technology Lithium-ion rechargeable battery USB rechargeable (Micro-USB cable included) Low battery indicator 4 modes: Constant / Flashing / Group Ride / Daytime Hyperflash Mode memory function Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) New seat post bracket SP-15 which also fits contemporary (Kammtail) aero seat post. Snap System™ bracket. Designed in Japan. Runtime: Constant (15 lumens): 5 hrs Flashing (10 lumens): 70 hrs Group Ride (35 lumens): 11 hrs Daytime Hyperflash (100 lumens): 15 hrs Charging time (From empty): 3 hrs
THE CLASSIC CHAIN LOCK WITH THE KNOWHOW OF ABUSTradition meets innovative design: The Catena 6806 combines the principle of the successful predecessor Catena 685 with the forward-looking security technology from ABUS.Chain locks have always enjoyed great popularity among experienced cyclists. This is not surprising as they have some unique properties. Just like the Catena 6806.For one thing the lock is lightweight and easy to transport. It can be stored folded in a bag or alternatively wrapped around the seat post of the bike.On the other hand it is so flexible that it is possible to chain your bike to almost any location without any problems. The Catena 6806 can still fit in even in the tightest of spaces and can be used whenever the bike is used.Technology:6 mm thick square chain with textile sleeve that prevents damage to paintworkThe chain is made of specially hardened steelOperation and use:Good protection at low theft riskRecommended for securing entry level bicyclesTransport:Convenient compact transport by wrapping the chain around the seat post
The HL-EL160 with a waterproof construction is a great companion for your commute or leisure ride.Long runtime,3x brighter than EL135,OptiCube™ lens technology,Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter,Low battery indicator,AA alkaline battery x 2,2 light modes,Mode memory function,FlexTight™ H-34N bracket.Tech Specs:Dimension: 89 x 38 x 32mm,Weight: 83 grams (light unit and battery),Light source: White LED X1,Runtime: Constant mode 50 lumens:30hrs,Flashing mode 50 lumens:250hrs,Battery: AA alkaline battery X2,Water resistant: IPX7.
Tough genuine Shimano toolsHardened steel for longevity and durability
A great value light set from Cateye that features a 200-lumen front light with a long lasting simple to use rear light. Packed with many great features and functions to keep you visible and safer in low light conditions.AMPP200 Features:Compact rechargeable headlight (200 lumens)Up to 30 hours runtimeThree light modes (High / Low / Flashing)Features - Easy to attach and remove, new & improved rubber band mount with 360° rotation.Excellent side visibilityLow battery indicatorLithium-Ion USB rechargeable battery (Micro-USB cable included)Mode memory functionThree light modes (High / Low / Flashing)Weight: Only 62gDesigned in JapanRuntime:High (200 lumens): 1.5 hrsLow (40 lumens): 13 hrsFlashing (200 lumens): 30 hrsCharging time (From empty) : 2.5 hrsORB Rechargeable Features:Rechargeable version of the popular ORB SL-LD160 modelEasy switch operation - Lens acts as power & mode buttonExcellent side visibilityDurable and elegant polished black aluminium bodyVersatile heavy-duty rubber strap mount - Attaches to seat post, helmet or bagWeight: 25gMode: Output, RuntimeConstant: 7 Lumen, 1.5hrsFast Flashing: 7 Lumen, 3.5hrsSlow Flashing: 7 Lumen, 4hrsCharging time (From empty): 3.5 hrsTechnology:Opticube - Our proprietary OptiCube lens technology maximizes brightness for greater visibilitySide Visibility - Provides visibility from the side to increase safetyUSB Rechargeable - USB rechargeable products recharge the battery from any USB portLow Battery Indicator - Alerts when remaining battery gets lowDaytime - Can be used in the daytimeAll Weather IPX4 - Can be used in rainy weather360° Adjustable (AMPP 200) - Light turns 360° for a multitude of lighting positions
Front LightThe Volt100XC is a feather light option for commuters, or other riders looking for an affordable way to illuminate a dark street or bike path.Key Features: Compact and lightweight rechargeable headlight (100 lm), USB direct rechargeable Lithium-ion battery, Low battery indicator, 2 light modes * Charging time: 1.5h, Mode memory function, Versatile rubber strap mount,.Rear LightLook no further than the ORB rear light. It's compact, lighweight and neat. With varying flashing modes, the ORB Rechargeable helps you to be seen out on the road.Key Features: Lens functions as push-button, USB rechargeable (Micro-USB cable included), 3 modes *Charging time: 3.5h, Robust aluminum body, Versatile rubber strap mount.