Engineered for versatility, this innovative saddle is kitted out with a Fibra-Tek cover construction that allows it to handle all the pressure that's associated with long days on the road and in the mountains. Whether you're a road cyclist or mountain biker, this model's carbon rails deliver strong, stiff and low weight performance as you conquer every ride. Sella Italia has also equipped this version with its renowned Superflow technology, which uses its large central cut out area to relieve pressure around your sit-bones. As a result, you'll enjoy reduced fatigue, so you can go the extra mile in comfort. SLR Kit Carbonio Superflow. A Constantly Renovated Myth. The saddle most used, sold and preferred by those for whom cycling is not only a passion but also a means to test one’s limits. The use of noble materials such as carbon and the special aerodynamic profile make it an innovative example of design and without doubt one of the most reliable saddles for the road and MTB.
With a 130mm fork combined with 125mm of rear suspension, the Reactor ST combines the best of an enduro bike (long, low and slack) with the best of an XC Race bike (lightweight spec and efficient suspension) to create a sprightly yet seriously capable machine. Frame Construction: To optimise the weight, strength and stiffness, the Reactor 290 ST Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). Adjustable Geometry: The Reactor ST features a 66.8° (66.3° Low) Headangle atop a 76.3° (75.8° Low) seat angle across a 460mm reach on a Medium frame. We also offer the frame in Large and X-Large sizes. The Reactor ST frames feature the same “flip chip” design as the regular Reactor frame to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor ST into a more aggressive machine, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, we designed the four-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor ST some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor ST is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 290 Carbon, 125mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 34 Float, Factory Series, Kashima, Grip 2 Damper, 130mm, 44mm Offset, BOOST, Black • Shock: Fox Float DPS, Factory Series, Kashima, 3 Position, EVOL LV, Custom LCL, LRL, CMF tune, 210x47.5mm, Bearing End 1x 0.2 Spacer fitted. • Front Wheel: Reynolds TR309 XC Front 28h, 29", Center-Lock, 110x15mm • Rear Wheel: Reynolds TR289 XC Rear 28h, 29", Center-Lock, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Minion DHF 29”x2.3 3C MaxxTerra/EXO/TR, Rear: Maxxis Agressor 29”x2.3 MaxxTerra/EXO/TR • Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline • Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus • Chain: Shimano XT M8100 HG 12-speed Inc Quicklink • Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano XT M8100, 2 Pot Brake, Metallic Pads • Front Rotor: Shimano RT-MT800, 180mm • Rear Rotor: Shimano RT-MT800, 180mm • Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Bikeyoke Divine Stealth w Shimano SL-MT500-IL Remote lever, M:160mm drop; L/XL:185mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 130mm Axle to Crown: 537mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x47.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
This road bike rear wheel features a carbon 19mm tubeless-ready rim and a precision-crafted Industry Nine hub that lowers rolling resistance, enhances lateral stiffness and improves your overall ride. This makes it an ideal upgrade for riders who want a stronger and more dynamic back wheel, without adding any unnecessary weight to your road bike. - Industry leading aerodynamic performance and cross wind stability with the Dispersive Effect Termination (DET) rim profile - Wide, tubeless ready rim provides better fit for higher volume tires that increase grip, lower rolling resistance and provide greater comfort - Precision manufactured Reynolds hub by Industry Nine for quick engagement and efficient transfer of power - Premium Sapim CX-Ray bladed spokes offer ultimate performance in weight and ride quality paired with internal, alloy nipples - Ctg2 brake track is 30% more resistant to heat than previous models Item Top Features Continued: Pawl: 3 Type: Shimano Wheelset Size: 700c Tubeless Compatible: Yes Brake Type: Rim Brake
High-quality replacement Nukeproof spare parts.
A pack containing 10 x 5mm carbon spacers.
Unshackled from the same old routes, each ride reveals new ways ahead, like a fresh map - that bridleway to who-knows-where, the gravel track through the woods or the rougher shortcut that you know is quicker but that other bikes couldn’t handle. See, in a world obsessed with pace, sometimes we need to focus on the place, the journey and the fun that comes from a bike with the capability to seek out adventures where others wouldn’t. Whether embarking on a far-flung bikepacking adventure or simply staying light for a mixed-terrain local loop, the Substance Carbon HT is capable of adapting to suit your ride, moreso than ever before. At its core, a lightweight carbon frame and Rockshox suspension fork are tuned for comfort on long days and across varied surfaces. Aided by big volume tyres that soften the bumps and add traction over rutted or loose tracks, the build also includes a dropper post for maximum freedom of movement on the steepest terrain. With compatibility for 1X or 2X drivetrains and either 700c or 650b wheels, you can really fine-tune the setup to best fit where you are riding. And if ultra-racing or multi-day expeditions are your thing, the frame has ample mounts for luggage, waterbottles and mudguards. For those remote rides where water, food and spares might be hard to come by, you can always load up with whatever you need to reach the next supply point. This isn’t simply about the same cliches of getting off the beaten track or going in search of the road less travelled, because the Substance is more than a gravel or adventure bike. It broadens your horizons, delivering richer experiences and powerful lasting memories. It’s a bike that enables you to do more. It’s a bike that gives you options. The Substance empowers a new mindset, one that entices you to break away from routine and to ride where you want to ride, unrestricted. Key Features: Dedicated carbon adventure/gravel frameset SRAM Rival 1X groupset RockShox Rudy XPLR suspension fork and Brand-X dropper seatpost Prime Orra V2 650b aluminium disc wheelset with Maxxis tyres Full mudguard mounts Rear rack and extra water bottle mounts Full Features: Frame: Substance Carbon, UD Carbon, Internal Cable Routing, 1X Dropper Post Compatible, Mudguard Mounts, Rack Mounts, 12mm x 142mm Axle, Flat Mount Fork: Substance Carbon, UD Carbon, Tapered Steerer, 100 x 12mm, Mudguard Mounts, Flat Mount Headset: ACROS Aix-Low R3, Sealed Bearings, OD48, 1 1/8” – 1 ½”, 41.8 / 28.6 – 52 / 40 Handlebar: FSA Adventure Compact Handlebars, 6061 Aluminium, 80mm Reach, 125mm Drop, 12 Degree Flare, XS:400mm S:420mm M:420mm L:440mm XL:440mm Stem: FSA Omega 6061 Aluminium, 3D Forged, Bar Bore: 31.8mm, +/- 6 degrees, XS:80mm S:90mm M:90mm L:100mm XL:110mm Grip(Tape): Vitus Super Grip, Anti Slip, Shockproof Wheelset: Prime Orra V2 Alloy, 650b, Tubeless Ready, 100 x 12mm Front, 142 x 12mm Rear, Centre Lock, HG Freehub Front Rim: Prime Orra V2 Alloy, 650b, Tubeless Ready Rear Rim: Prime Orra V2 Alloy, 650b, Tubeless Ready Front Hub: Prime SR2D, 12x100mm, Centre Lock Rear Hub: Prime SR2D,142x12mm, Centre Lock, HG Freehub, 36T Ratchet System Front Tyre: Maxxis Rambler, 650b x 47, Tubeless Ready, EXO Casing, Tan Wall Rear Tyre: Maxxis Rambler, 650b x 47, Tubeless Ready, EXO Casing, Tan Wall Spoke: Double Butted, Black Chain: KMC X11, 11 Speed Crankset: SRAM Rival X-Sync, 40T, 11 Speed, XS:170mm S:170mm M:172.5mm L:172.5mm XL:175mm Bottom Bracket: SRAM GXP, BSA Threaded, 68mm, English F/brake Set: SRAM Rival, Hydraulic Disc, Flat Mount R/brake Set: SRAM Rival, Hydraulic Disc, Flat Mount Rotors: SRAM Centreline, Front: 160mm, Rear: 160mm Front Derailleur: N/A Rear Derailleur: SRAM Rival, 11 Speed, Long Cage Left Shifter: SRAM Rival, Hydraulic Brake Lever Right Shifter: SRAM Rival, 11 Speed Freewheel: SRAM PG 1130, 11 Speed, 11-42T Saddle: Vitus, Ti Rail Seat Post: Brand-X Ascend CX dropper post, 85mm Drop, 350mm Length, 27.2mm Diameter Seat Screw: Aluminium 31.8mm, Stainless Steel Bolt Weight: Medium: 10.1kg Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Constructed from unidirectional carbon fibre and layered with a toughened ARC covering, each rim provides a rigid and protective performance on every outing. Finley balanced thanks to the 19mm internal width, these rims give as true and consistent a roll as possible as you tear across the tarmac. Fast-Paced, Carbon and Aluminium Road Wheels The front-wheel spins on a carbon hub on the front with an aluminium one on the rear, and both come with oversized aluminium flanges and USB (Ultra Smooth Bearing) ceramic bearings for a silky-smooth rotation. They also help the aluminium aero-shaped straightpull spokes to strengthen the build for the rigours and pressures of such pacy and lengthy riding. Ideal for gravel riding as well as intense road racing, this tubeless-ready duo is made to meet the demands of the modern rider.
This wheelset is ideal for riders who want to lighten the load on their road bike or those who are seeking to gain speed through an aerodynamic advantage. It features two wide, tubeless-ready rims that match perfectly with higher volume tyres. This allows you to benefit from an increased grip, comfort as well as a lower rolling resistance as you clock up the miles. Reynolds has also equipped this model with fast-rolling TR3 hubs, which deliver a smooth rolling experience on every road. One final highlight is this version's refined rim shape that's optimised for crosswind stability, so that you can maintain your momentum in the toughest of riding conditions. - Wide, tubeless ready rim provides better fit for higher volume tyres that increase grip, lower rolling resistance and provide greater comfort - Refined, wider rim shapes have been optimised for crosswind stability at a variety of yaw angles - Features Sapim Sprint spokes and durable brass nipples - Equipped with fast rolling and smooth Reynolds TR3 hubs Item Top Features Continued: Engagement: 10 degrees Pawl: 4 Included: Front & Rear QR Skewers; 2x75mm Tubeless Valve Stems; Cryo-Blue Power Pads; 22mm Tubeless Tape installed; Reynolds Owner's Manual Weight: 1700g
This road bike wheelset features a tubeless-ready carbon rim profile, which makes it suitable for adding bigger modern tyres for increased stability, comfort and as well as a reduced weight. Reynolds has also kitted out this version with rim brake compatibility, so you can enjoy the benefits of its Ctg2 brake track that is 30% more resistant to heat than previous models. - Wide, tubeless ready rim provides better fit for higher volume tyres that increase grip, lower rolling resistance and provide greater comfort - Refined, wider rim shapes have been optimized for crosswind stability at a variety of yaw angles - Features Sapim CX-Sprint bladed spokes with lightweight alloy nipples - Premium graphics offer ultra clean and subtle appearance - Equipped with fast rolling and smooth reynolds allroads hubs - Ctg2 brake track is 30% more resistant to heat than previous models Item Top Features Continued: Pawl: 4 Type: Shimano Brake Type: Rim Brake Wheelset Size: 700c Tubeless Compatible: Yes Weight: 1635g
Compressive swimwear doesn’t have to feel restrictive or uncomfortable, and nowhere is that clearly than with the Arena Women’s Powerskin Carbon Air2 Fastback Short Leg Open Back one-piece swimsuit. The trick is the intelligent design of the carbon bands that compress in all the right places, keeping fatigue and lactic acid at bay while still allowing you to move freely, supported by an open back that helps you make every stroke count like never before. You won’t want to swim in anything else and the good news is, the water repellency and durability of the suit means that you never have to!
Maximise speed by making every muscle movement work for you when you wear Arena’s brilliantly designed Powerskin Carbon Air2 Jammer. Completely seam free to boost comfort and do away with both drag and chafing, the ultra-lightweight fabric that goes into its construction smooths the body into the most streamlined shape possible with complete freedom of movement. Muscles work harder too thanks to the horizontal carbon bands built in adding light compression to your time in the water to keep fatigue at bay for longer.
The way you feel in the water has a huge impact on your race. The Arena Powerskin Carbon Core FX Jammers are engineered for a sensation of maximum strength. This men’s tech suit intensely compresses, oxygenating specific muscle groups called into action when swimming. It’s cut from Carbon Cage fabric with horizontal and vertical bands locking onto the body. Parallel lines of dual taping on the back of the legs help maintain a horizontal, lifted position in the water, even when you’re tired. Feel powerful support and core stability on the inside with the internal taping system. Locked-in, lifted and ready to go. Care Instructions Rinse immediately after use, in non-chlorinated water. Do not leave the wet swimsuit in a bag or other container for a long time. Do not expose the wet swimsuit in a bag or other container to direct sunlight. Wash with detergents suitable for delicate clothes, Air-dry away from heat sources. Hand wash only. Do not dry clean. Do not bleach. Do not machine dry. Do not iron.