Featuring an ultra-strong T700/800 monocoque carbon fibre construction, this mountain bike (MTB) frame offers fantastic stiffness and durability without weighing down your ride with unnecessary excess grams. Nukeproof has also equipped it with a Factory Series Fox Float X rear shock for smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing, which allows you to benefit from trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is a perfect choice of upgrade for completing your full suspension MTB bike build. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.5Kgs/7.7lbs (Medium option)
This high-quality wheelset is Fast Forward's first-ever dedicated model for gravel bike riding and offers durable, agile and lightweight performance as you conquer every adventure. It features a full carbon rim construction, which gives it exceptional stiffness and versatility without adding any unnecessary grams to your ride. Fast Forward has also equipped it with Centrelock disc brake compatibility, so riders can enjoy powerful and consistent braking operation wherever their ride takes them. Another highlight is its tubeless-ready technology, which means that you'll benefit from lower rolling resistance, increased comfort and stability, as well as fewer chances of flats or punctures. Adventure-Ready Carbon Gravel Wheelset While weight is normally one of the most interesting specifications to check, Fast Forward takes a different approach when it comes to producing top-quality wheels. In the brand's choices, weight is important but should not compromise other areas such as durability and agility. For the Drift, it was even more important as they need to last and cope with whatever comes on your gravel paths. You will find this in the DT Swiss Aerocomp spokes and brass nipples for example which - when put together with the updated DT240 EXP hubs - make a fantastic set. The thicker spokes also offer more rigidity and durability and can take some hits. Agility is brought together by the rim's height of 36mm combined with the Aerocomp spokes. These ingredients bring you stiffness and more power transmission when you put the wheels in motion. All your energy will result in more and easy miles off-road and thus more time to enjoy your ride! Hookless Design for Tubeless This wheelset's hookless rim design features an internal width of 24mm only to be used with tubeless tyres. A special carbon layup is chosen to deal with higher impacts when riding on low tyre pressure on more heavy gravel roads. It offers the possibility for a broad range of tyre options from 30mm up to 60mm and with that no excuse for the terrain you will attack. The set puts merely 1515 grams on the scale and comes as a complete package with tubeless tape and valves packed nicely in a protective FFWD wheel bag. Drift is the first dedicated gravel wheelset that marks the start of this category for Fast Forward. Additional Top Features: Type: Clincher with Hookless design Disc Brake Compatible: Yes Rim Brake Compatible: No Inner Tube Compatible: Yes Tubeless Compatible: Yes Tubular Compatible: No Hub Type: DT Swiss 240 EXP (2:1) Bearings: Cartridge; Stainless Steel Spoke Type: DT Aerocomp Spoke Style: Straight-pull Spoke Count: Front: 24; Rear: 24 Nipples: DT Pro Lock Brass 15mm Rim Tape: Tubeless tape; 27mm Single or Pair: Pair Included: Wheelset, pre-installed tubeless tape, pair of alloy tubeless valves, tubeless instructions and a high quality padded wheel bag Manufacturer's Part Numbers: ASDRIFT36FCC240S Black 700c Shimano 9/10/11sp ASDRIFT36FC240XD Black 700c SRAM XDR
This road bike wheelset features two wide, tubeless-ready rims that provide a better fit for higher volume tyres. This allows you to benefit from an increased grip, lower rolling resistance and greater comfort wherever your ride takes you. Reynolds has also equipped this model with a refined, wider rim shape that is optimised for crosswind stability. This means that you'll benefit from an aerodynamic advantage that will confidently carry you and keep your momentum flowing during challenging course or road conditions. - Wide, tubeless ready rim provides better fit for higher volume tyres that increase grip, lower rolling resistance and provide greater comfort - Refined, wider rim shapes have been optimised for crosswind stability at a variety of yaw angles - Features Sapim Sprint spokes and durable brass nipples - Equipped with fast rolling and smooth Reynolds TR3 hubs Item Top Features Continued: Engagement: 10 degrees Pawl: 3 Includes: 2x55mm Tubeless Valve Stems; End Caps (12TA/12x142 installed 15TA included); 25mm Tubeless Tape installed; Reynolds Owner's Manual Weight: 1630g
This road bike front wheel features a carbon 19mm tubeless-ready rim and a precision-crafted Industry Nine hub that lowers rolling resistance, enhances lateral stiffness and improves your overall ride. This makes it an ideal upgrade for riders who want a stronger and more dynamic front wheel, without adding any unnecessary weight to your road bike. - Industry leading aerodynamic performance and cross wind stability with the Dispersive Effect Termination (DET) rim profile - Wide, tubeless ready rim provides better fit for higher volume tyres that increase grip, lower rolling resistance and provide greater comfort - Precision manufactured Reynolds hub by Industry Nine for quick engagement and efficient transfer of power - Premium Sapim CX-Ray bladed spokes offer ultimate performance in weight and ride quality paired with internal, alloy nipples - Ctg2 brake track is 30% more resistant to heat than previous models Item Top Features Continued: Pawl: 3 Wheelset Size: 700c Tubeless Compatible: Yes Brake Type: Rim Brake
Constructed from 3K high modulus carbon fibre, these lightweight spacers will match your Deda stem and bars perfectly. Plus, with their subtle UD carbon finish, they’ll suit any frame colour scheme.
Benefitting from Deda’s well-known and race-proven RHM (rapid hand movement) philosophy isn’t the only plus point with these bars. A must-have bar for those who want to give their bike some lass and to increase its performance, the Superleggera 35 adopts the larger 35mm bar clamping standard. Used in conjunction with 35mm bars, this system offers ultra-precise steering and optimised power transfer when you’re giving it your all.
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to a SRAM Road GXP carbon fibre non-drive side crank arm, it is individually calibrated to ensure its accuracy. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust. Reliable Readings In All Conditions To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data. Stable Connection Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance. Compatibility: · Compatible with all SRAM GXP road drivetrains · Frame Compatibility: Most frames · Device Compatibility: ANT+, Bluetooth Smart ready · Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others In The Box: · Power meter · High-quality CR2032 coin cell battery · Product identification card with serial number and ANT+ I.D. · Number user guide
These bars have been completely redesigned from the previous model to offer superior stiffness-to-weight ratio, enhancing both power delivery and steering precision. They also have a 130mm wide clamping section, giving you plenty of position options for your extension bars. Engineered to help you to shave seconds off your PB times, the Tribar Carbon Aero Bars are fully UCI and ITU compliant and compatible with Shimano Di2 or Campagnolo EPS internal cable routing.
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to a non-drive-side Stages Carbon crank arm, it is individually calibrated to ensure its accuracy. This particular Stages crank arm is built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust. Reliable Readings In All Conditions To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data. Stable Connection Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance. Compatibility: · Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold separately) · Frame Compatibility: Most frames · Device Compatibility: ANT+, Bluetooth Smart ready · Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others Stages Cycling spindles for 30mm are available in five options to purchase separately: · For SRAM Red 22 BB30 · For SRAM Force 22, Rival 22, Force/Rival CX1 · For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer · For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacer · Race Face Next SL In The Box: · Power meter · High-quality CR2032 coin cell battery · Product identification card with serial number and ANT+ I.D. · Number user guide
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to a SRAM GXP MTB carbon fibre non-drive side crank arm, it is individually calibrated to ensure its accuracy. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust. Reliable Readings In All Conditions To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data. Stable Connection Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance. Compatibility: · Compatible with all SRAM GXP MTB drivetrains · Frame Compatibility: Most frames · Device Compatibility: ANT+, Bluetooth Smart ready · Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others In The Box: · Power meter · High-quality CR2032 coin cell battery · Product identification card with serial number and ANT+ I.D. · Number user guide
This high-quality Nukeproof Mega 275 Carbon Downtube Protector is ideal for keeping your downtube in pristine condition from stones and dirt as you rip through the trails. Ideal for keeping your bike protected against harsh elements on a regular basis, this downtube protector is a great shield against all dirt that the rough terrain throws at you. Specially designed to fit 2018 Mega Carbon 275 models, this genuine Nukeproof protector is made from robust silicone construction. Easy to install to your downtube thanks to the 3M adhesive backing, the Mega Carbon - Downtube Protector is the perfect addition to your bike for maximum protection ride after ride.
This Mathieu Van der Poel (MVDP) signature saddle features a high-quality fibra-tek cover, which allows it to handle all of the pressure and intensity associated with road racing and endurance riding. Selle Italia has also equipped it with carbon rails for a superior combination of stiffness, durability and low weight performance as you conquer every mile of road. Another highlight is it comes race-ready with a Superflow channel that runs down its middle section for relieving pressure from around your sit-bones and reducing numbness and fatigue. Weighing in at only 162g, this is a lightweight choice of upgrade for staying comfortable and supported without adding any unnecessary weight to your ride. A Never Ending Tradition Thanks to the collaboration with an undisputed champion, like Mathieu Van der Poel, the tradition is continuing in the best way; and it is from this partnership that the Flite Boost Kit Carbonio Superflow “MVDP edition” is born. Dedicated Logo Made in white, like the Flite Boost usually used by Mathieu during the race, it features a logo with the word MVDP created “ad hoc” for the athlete. Manufacturer's Part Number: 017A920ICA007 White L3