The Stealth Superlight's state-of-the-art construction sees a one-piece design seamlessly integrating saddle and rails, resulting in a 15% weight reduction. Unique structure sheds 27g over the standard carbon version, tipping the scales at only 145gKey Features:Cutting-edge carbon weave pattern and precision fibre lay-up construction increases both stiffness and compliance,With increased compliance in the base, the padding and cover material have been upgraded to support sitbone comfort and alleviate pressure points in three main positions - on the hoods, drops and tops,The polyurethane cover, which sits over lightweight EVA foam, was tested with a variety of bib short materials to find the lowest friction rates between rider and saddle,The Stealth Superlight retains the original shape, a wide cut-out channel in the middle, offering extra comfort for riders on the edge,To retain saddle stiffness and power transfer the base includes horizontal reinforcement bridges, all part of the unique one-piece carbon reinforced base,Weight - 145g.
Key Features:Light enough? Think again.,The ultimate full carbon monocoque handlebar, as used by the pro peloton, just got lighter,The new VIBE Superlight Handlebar is 15% lighter than the standard VIBE bar,Full one piece T800 UD carbon fibre monocoque construction gives a lightweight and stiff handlebar,Ergonomic, 31.8 mm, oversized top section design further increases strength, stiffness and comfort,Fully internal cable routing options for brake and shift, perfect for Di2,Innegra™ fibres woven into the carbon layup add extra security to the construction,Weight - 40cm, 175g / 42cm, 180g / 44cm, 185g.
For all-terrain adventurers who are looking to travel light without compromising performance, control or comfort. Lightweight and robust carbon fibre layup for stiffness and compliance in all the right areasKey Features:Ergonomically designed top-section, 20° flare and 5° backsweep for comfortable all-day cruising,Engineered to fully integrate either mechanical or Di2 groupsets,Optimised mid-section for lights, GPS mounts or GRX Sub-Brake Levers,Weight from 195g,Drop 110mm,Reach 75mm,Available in 40, 42 and 44cm widths.
Key Features:Light enough? Think again.,The ultimate full carbon monocoque aero handlebar, as used by the pro peloton, just got lighter,The new VIBE Superlight Aero Handlebar is 45g lighter than the VIBE Carbon Aero Handlebar,Full one piece T800 UD carbon fibre monocoque construction gives a lightweight and stiff handlebar,Aerodynamic top section design cuts through the wind without sacrificing strength, stiffness or comfort,Fully internal cable routing options for brake and shift, perfect for Di2,Innegra™ fibres woven into the carbon lay up to add extra security to the construction,Weight - 40cm, 200g / 42cm, 205g.
It positions the saddle further forward, in the same way as a steeper seat tube angle, making for a more powerful aerodynamic position.
This carbon post is the go to conversion part to allow a change in body position on the bike to suit time trailing or triathlon riding effortsThe saddle is pushed further forward moving the centre over the bottom bracket in the same way as a steeper seat tube angle on a specific TT bikeA more powerful aerodynamic position can be achievedTraditional 73 degree seat tube angles are increased to 78 degrees with a physical move forward of up to 38 mmMulti-layer multi-directional carbon fibre weave to soak up road shock and deliver aerodynamicsForged 6061-T6 aluminium head construction for strength where it's needed27.2 mm diameter300 mm longWeight is just 210 grams
The Supersonic/Ergo Plus Range of aerobars offers the simplest and most comprehensive adjustment range on the market. As the premium level of our new generation clip on aerobars they represent the culmination of a significant investment in advancing the state of the art. Features: ARMREST: The Ergo Plus Armrest takes the shape of our popular Ergo armrest and lengthens it to 124mm to increase the contact surface for your arms, thus lowering the pressure on your skin even further. Additionally, we've developed a new surface pattern that helps to increase grip and wick away sweat, EXTENSIONS: The SLC extensions help make our carbon clip on bar one of the lightest on the market. They are drilled for rear-exit cable routing and come in a variety of moulded extension shapes, BRACKETS: The Supersonic bracket is the first and premier model of the new generation Profile Design brackets. It offers easier adjustment and a greater fit range than anything that came before it, ADJUSTABILITY: The extension length and rotation can be easily adjusted using the top bolt. There are 80 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1360 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip on bar on the market (and in history), WEIGHT: Approx 673g total weight, FIT: Armrest Offset: 70mm to -2.5mm in 7.5mm steps, Armrest Width: 124mm to 290mm in 18.5mm steps, Armrest Stack: 140mm - 80mm (with spacer kit) in 5mm increments,ACCESSORIES: UCM Aerobridge to mount your Garmin between the bars.
Ready for the most demanding of terrains, this MTB riser bar features a carbon construction that makes it more than cable of enduring all the challenges that are associated with gravity riding. Using Plastic Foam Lamination (PFL) manufacturing processes, this trail-ready model utilises tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. The process uses less excess resin and fewer ply's, resulting in a 15% lighter bar. ProTaper has also equipped this model with an 810mm width as well as cut marks for riders who want to cut it to suit their riding style. Coming complete with a Textured Grit Grip finish in its clamping areas, this riser bar eliminates the over-tightening of components. Manufacturer's Part Numbers: 301-36182-C301 Black/Silver 31.8 x 810mm 1 1/2" 301-36182-C302 Black/Silver 31.8 x 810mm 1"
This mountain bike (MTB) riser handlebar is kitted out with a carbon construction, which offers a fantastic balance of stiffness and strength as well as an impressively low weight. ProTaper has also put this model through its Plastic Foam Lamination (PFL) manufacturing process, which uses tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. As a result, it uses less excess resin and fewer plys, resulting in a 15% lighter bar. Carbon MTB Riser Bar with Comfortable Geometry Engineered for wherever the trail leads you, this model is equipped with four degrees upsweep and eight degrees backsweep for comfortable and precise steering in demanding terrain conditions. Weighing in at only 190g, this is a great choice of upgrade for strong steering performance without any weight penalty. Technologies: - ProTaper Carbon bars feature PFL (Plastic Foam Lamination) manufacturing. PFL utilises tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. The process uses less excess resin and fewer plys, resulting in a 15% lighter bar. - Cut marks provide a range of width options. - Textured Grit Grip finish in clamp areas eliminates over-tightening of components. Manufacturer's Part Numbers: 301-36182-C102 Black/Black Stealth 31.8mm 810mm 25.4mm Rise 301-36183-C101 Black/Black Stealth 35mm 810mm 25.4mm Rise 301-36182-C101 Black/Black Stealth 31.8mm 810mm 12.7mm Rise
ProTaper MTB Carbon HandlebarOffering a fantastic balance of stiffness and strength as well as an impressively low weight, this mountain bike (MTB) riser handlebar is kitted out with a carbon construction. ProTaper has also put this model through its Plastic Foam Lamination (PFL) manufacturing process, which uses tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. As a result, it uses less excess resin and fewer plys, resulting in a 15% lighter bar.Carbon MTB Riser Bar with Comfortable GeometryEngineered for wherever the trail leads you, this model is equipped with four degrees upsweep and eight degrees backsweep for comfortable and precise steering in demanding terrain conditions. Weighing in at only 190g, this is a great choice of upgrade for strong steering performance without any weight penalty.Features: Material: Carbon Use: MTB Width: 810mm Upsweep: 4 degrees Backsweep: 8 degrees Diameter: Multiple options available to select Rise: Multiple options available to select Weight: 190gTechnologies: ProTaper Carbon bars feature PFL (Plastic Foam Lamination) manufacturing. PFL utilises tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. The process uses less excess resin and fewer plys, resulting in a 15% lighter bar. Cut marks provide a range of width options. Textured Grit Grip finish in clamp areas eliminates over-tightening of components.Manufacturer's Part Numbers: 301-36182-C102 Black/Black Stealth 31.8mm 810mm 25.4mm Rise 301-36183-C101 Black/Black Stealth 35mm 810mm 25.4mm Rise 301-36182-C101 Black/Black Stealth 31.8mm 810mm 12.7mm RiseBuy ProTaper Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ProTaper MTB Carbon HandlebarOffering a fantastic balance of stiffness and strength as well as an impressively low weight, this mountain bike (MTB) riser handlebar is kitted out with a carbon construction. ProTaper has also put this model through its Plastic Foam Lamination (PFL) manufacturing process, which uses tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. As a result, it uses less excess resin and fewer plys, resulting in a 15% lighter bar.Carbon MTB Riser Bar with Comfortable GeometryEngineered for wherever the trail leads you, this model is equipped with four degrees upsweep and eight degrees backsweep for comfortable and precise steering in demanding terrain conditions. Weighing in at only 190g, this is a great choice of upgrade for strong steering performance without any weight penalty.Features: Material: Carbon Use: MTB Width: 810mm Upsweep: 4 degrees Backsweep: 8 degrees Diameter: Multiple options available to select Rise: Multiple options available to select Weight: 190gTechnologies: ProTaper Carbon bars feature PFL (Plastic Foam Lamination) manufacturing. PFL utilises tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. The process uses less excess resin and fewer plys, resulting in a 15% lighter bar. Cut marks provide a range of width options. Textured Grit Grip finish in clamp areas eliminates over-tightening of components.Manufacturer's Part Numbers: 301-36182-C102 Black/Black Stealth 31.8mm 810mm 25.4mm Rise 301-36183-C101 Black/Black Stealth 35mm 810mm 25.4mm Rise 301-36182-C101 Black/Black Stealth 31.8mm 810mm 12.7mm RiseBuy ProTaper Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ProTaper Carbon Team Issue BarPrepared for the most demanding of downhill (DH), enduro and all-mountain terrains, this mountain bike (MTB) riser bar features a carbon construction that makes it more than cable of enduring all the challenges that are associated with gravity riding. Using Plastic Foam Lamination (PFL) manufacturing processes, this trail-ready model utilises tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. The process uses less excess resin and fewer ply's, resulting in a 15% lighter bar. ProTaper has also equipped this model with an 810mm width as well as cut marks for riders who want to cut it to suit their riding style. Coming complete with a Textured Grit Grip finish in its clamping areas, this riser bar eliminates the over-tightening of components.Features: Material: Carbon Finish: Textured Grit Grip finish in clamp areas Use: MTB, Downhill and Enduro Width: 810mm, cut marks also provide a range of width options Clamp Diameter: 31.8mm Up Sweep: 4 degrees Back Sweep: 8 degrees Rise: 1" Version: 25.4mm; 1 1/2" Version: 12.7mm Weight: 190gManufacturer's Part Numbers: 301-36182-C301 Black/Silver 31.8 x 810mm 1 1/2" 301-36182-C302 Black/Silver 31.8 x 810mm 1"Buy ProTaper Components from Chain Reaction Cycles, the World's Largest Online Bike Store.