From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 36 Float, Performance Elite Series, Grip 2 Damper, 150mm, 44mm Offset, BOOST, Black • Shock: Fox Float X, Performance Elite Series, 2 Position, LV EVOL, Custom CM+, RM, Rezi LM tune, 210x50mm, Bearing End, 1x 0.2 spacer fitted. • Front Wheel: Nukeproof Horizon V2 29", 6 Bolt, 110x15mm • Rear Wheel: Nukeproof Horizon V2 29", 6 Bolt, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Assegai 29x2.5" WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29x2.4" WT 3C MaxxTerra/EXO+/TR • Crankset: Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline • Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus • Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink • Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads • Front Rotor: Brakco, 203mm • Rear Rotor: Brakco, 180mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Brand-X Ascend internal with Brand-X Remote lever, M:150mm drop; L:170mm drop; XL:200mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: 14.66kg (Medium, Tubeless) Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 557mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Nukeproof Reactor 290 Elite Carbon Bike (SLX - 2022)Bringing you a smooth and responsive ride whilst also keeping the weight down, Reactor 290 Elite Carbon will have you dominating even the most difficult trails like a pro. Whether you’re attacking a technical climb or blasting through a rock garden, the Fox Float performance suspension and the Shimano SLX 12-Speed components will ensure you hold your line and maintain your speed.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Frame Construction:To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable Geometry:All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension Design:To ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Fork: Fox 36 Float, Performance Elite Series, Grip 2 Damper, 150mm, 44mm Offset, BOOST, Black Shock: Fox Float X, Performance Elite Series, 2 Position, LV EVOL, Custom CM+, RM, Rezi LM tune, 210x50mm, Bearing End, 1x 0.2 spacer fitted. Front Wheel: Nukeproof Horizon V2 29", 6 Bolt, 110x15mm Rear Wheel: Nukeproof Horizon V2 29", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29x2.5" WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29x2.4" WT 3C MaxxTerra/EXO+/TR Crankset: Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco, 203mm Rear Rotor: Brakco, 180mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand-X Ascend internal with Brand-X Remote lever, M:150mm drop; L:170mm drop; XL:200mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 14.66kg (Medium, Tubeless) Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information.Key Specifications:Material: Ultra Strong T700/800 Monocoque Carbon FibreFork Travel: 150mmAxle to Crown: 557mmFork Offset: 44mmRear Travel: 130mmWheels Size: 29"Max Tyre Size: 2.6"Recommended Shock Sag (Measured seated): 30%Shock Size: 210x50mmShock Hardware F: 25x8mmShock Hardware R: 30x8mmSizing: M/L/XLHeadtube: 44-56mm Tapered Semi-IntegratedHeadset: ZS44-28.6 - T2 / ZS56/40 - B8Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS)Seatpost: 31.6mm (Internal Routing for Dropper Seatpost)Seat Clamp: 36.4mmBB: Threaded 73mm BSARear Hub: Boost 148x12mmRear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm)Chain Guide: ISCG05Brake Mount: 180mm Direct PostProtection: 3D Contoured Rubber Frame Protection for DT/SS/CSTechnologies: Flip Chip Adjustable Suspension Geometry: All models of the Reactor feature a "flip-chip", so that the bike geometry can be easily adjusted from "Trail" to "Rail" mode without having to custom tune your suspension setup. The Trail setting is best suited for pumping and carving your rhythm and style into the mountainside and still caters for rides who love the climb as much as the descent. On the other hand, the Rail setting turns the Reactor into an adrenaline-fuelled gravity tamer. Dropping the bottom bracket height by 6mm and slackening the head angle by half a degree, these changes give this Reactor greater stability and control when the trail leans downhill towards vertical Nukeproof 4-Bar Horst Linkage Suspension Design: Ensuring the bike can climb as well as it descends, Nukeproof focussed on fine-tuning their 4-Bar Horst linkage suspension setup to give higher levels of anti-squat performance when higher up the cassette in the climbing gears, but also to deliver greater trail-gobbling performance when you drop down the cassette and begin descending the mountain. This means that the bike behaves itself on the climbs and grips with unprecedented traction and efficiency when making your way back towards sea-level. When you get it up to speed and drop a few gears to carry momentum, this bike turns into a trail hooligan and helps you carve the trail with style. The combination of low anti-squat and progressive suspension-rate give it the ultimate in small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. With balanced anti-rise suspension performance, the Reactor provides some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure stability and traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any rideEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for kids’ bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is kids’ bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
With seven wins at Paris-Roubaix our Roubaix has proven that Smoother is Faster. Until this moment however smooth has admittedly come with some compromises. But not anymore. The all-new Roubaix Expert now delivers compliance without compromise by introducing a radical new Future Shock 1.5 that gives you more control on rough roads a new Pavé seatpost that creates our most balanced Roubaix to date aerodynamics that equal the Tarmac and a Rider-First Engineered™ frame that’s shed some serious weight. Is it still comfortable? Sure but don’t call it a comfort bike because performance was behind every engineering decision we made. This is the new Roubaix. This Roubaix Sport provides a tremendous value but like the frame itself this value doesn’t come with any compromises. We spec’d it with Shimano’s 105 11-speed groupset for its crisp shifts and powerful hydraulic disc brakes as well as smooth and sturdy DT R470 Disc wheels the all-new S-Works Pavé seatpost 28mm Turbo Pro tires and our fan-favorite Power Sport saddle. The new frame delivers compliance without compromise via the perfect balance of aerodynamics light overall weight via a FACT 10r carbon construction compliance and Rider-First Engineering. With tube shapes that were born in our FreeFoil Shape Library and validated in the Win Tunnel the new Roubaix is more aero than the Tarmac SL6. Meanwhile to ensure the weight and ride quality we turned to a Rider-First Engineered™ design to deliver optimal stiffness and compliance across all sizes from 44 to 64cm. Of course the frame has shed some serious weight in the process. And to prep you for your own Hell of the North we’ve made room for 33mm tires. To go along with the new frame we’ve also developed a totally-new S-Works Pavé seatpost. Not only is it the first compliant seatpost that’s also aerodynamic it does so without any additional weight or finicky contraptions. Starting with the same D-shape design found on the Tarmac we took its compliance a step further by building additional flex into the upper and developing a new drop-clamp design in the frame. This provides plenty of compliance while staying perfectly balanced with the front-end so you get a smooth balanced ride no matter how rough the road. With 20mm of rough-road-taming travel the Future Shock 1.5 not only delivers a smoother more comfortable ride but it also reduces fatigue and increases speed over harsh terrain. The new Smooth Boot meanwhile enhances the aesthetics to bring a clean transition from the head tube to the stem Roubaix Sport Technical Specifications FRAMESET Frame FACT 10R Rider First Engineered™ (RFE) FreeFoil Shape Library tubes threaded BB 12x142mm thru-axle flat-mount disc Suspension Fork Future Shock 1.5 w/ Smooth Boot 12x100mm thru-axle flat-mount disc COCKPIT Handlebars Specialized Hover Comp Alloy 125mm Drop 75mm Reach w/Di2 Hole Stem Future Stem Comp Tape Roubaix S-Wrap Saddle Body Geometry Power Sport steel rails SeatPost S-Works Pave Seat Binder Hidden drop clamp BRAKES Front Brake Shimano 105 Hydraulic disc Rear Brake Shimano 105 Hydraulic disc DRIVETRAIN Shift Levers Shimano 105 R7020 hydraulic disc Front Derailleur Shimano 105 R7000 braze-on Rear Derailleur Shimano 105 R7000 GS medium cage 11-speed Cassette Shimano 105 11-speed 11-34t Crankset Shimano 105 R7000 HollowTech 2 11-speed Chainrings 50/34T Bottom Bracket Shimano Threaded BSA BB Chain KMC X11 Extra Lightweight 11-speed WHEELS & TIRES Front Wheel DT Swiss R470 rim 20mm internal width tubeless ready 24h Specialized full sealed bearing thru axle hub centerlock disc DT Swiss Champion 14G stainless steel spokes DT Swiss brass nipples. Rear Wheel DT Swiss R470 rim 20mm internal width tubeless ready 24h Specialized full sealed bearing thru axle hub centerlock disc alloy freehub body DT Swiss Champion 14G stainless steel spokes DT Swiss brass nipples. WHEELS Front Tire Specialized Turbo Pro 700x30mm Rear Tire Specialized Turbo Pro 700x30mm Inner Tubes Presta valve 48mm * Specifications are subject to change without notice
Unrivaled suspension kinematics sublime handling perfectly-tuned frame stiffness—the Stumpjumper Comp is our fully featured fully affordable full-carbon definitive trail bike. All-new geometry all-new suspension thoughtfully spec’d—it’s ready to take you wherever the trail may lead. THE TRAIL BENCHMARK — When we set out to design the all-new Stumpjumper we pursued some hefty goals. It had to excel on any kind of trail for every style of rider. To achieve that we went after serious weight reduction without sacrificing durability a stiff responsive chassis that still rides light and lively geometry that improves everyone’s riding and the best suspension kinematics we know how to design. Turns out you can have your cake and eat it too with the new Stumpjumper. THE SWEETEST 130MM OF TRAVEL YOU’LL EVER RIDE — We massaged the kinematics of the Stumpjumper suspension to bring out the very best all-round performance possible in a 130mm package. Countless hours of suspension lab development and field testing created a refined mid-travel ripper that eats big terrain like a gravity fed beast handles like a dream everywhere and climbs like it has a motor. PROGRESSIVE GEOMETRY — The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. It’s long low and slack with a short offset fork and a steeper seat tube angle. These numbers combine to make your ride more stable more carvealicious more comfortable climbing more better everywhere. With FlipChip adjustability you’re able to further fine-tune your fit ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose. RIDER-FIRST ENGINEERED™ — Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1 or a DH-fiend giant in need of the lengthy S6 you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight And by light we mean real light: 2250 grams (S-Works S-3 size with rear shock). SWAT™ — When we introduced the SWAT™ door on the Stumpjumper in 2016 we increased pocket space and added room for those “oh s**t” pumps and flat accessories. With the new Stumpjumper we’ve kept those same design hallmarks that you know and love. FRAMESET Frame FACT 11m carbon chassis and rear-end asymmetrical design 29 Trail Geometry SWAT™ Door integration flip chip Head Tube/Bottom Bracket adjustment threaded BB fully enclosed internal cable routing 12x148mm dropouts sealed cartridge bearing pivots replaceable derailleur hanger 130mm of travel Seat Binder Alloy 38.6mm Suspension Rear Shock FOX FLOAT DPS Performance Rx Trail Tune rebound and 3-position compression adjust 190x45mm Fork FOX FLOAT 34 Rhythm GRIP damper two position Sweep adjustment 15x110mm axle 44mm offset 140mm of travel COCKPIT Stem Alloy Trail Stem 35mm bar bore Handlebars Specialized 6061 alloy 6-degree upsweep 8-degree backsweep 30mm rise 780mm width Tape Specialized Trail Grips Saddle Bridge Comp Hollow Cr-mo rails 155/143mm SeatPost X-Fusion Manic infinite adjustable two-bolt head bottom mount cable routing remote SLR LE lever 34.9 S1: 100mm S2: 125mm S3: 150mm S4/S5: 175mm S6: 190mm BRAKES Front Brake Shimano SLX M7120 4-piston caliper hydraulic disc 200mm Rear Brake Shimano SLX M7120 4-piston caliper hydraulic disc 180mm DRIVETRAIN Rear Derailleur Shimano SLX M7100 SGS 12-speed Shift Levers Shimano SLX M7100 12spd Cassette Shimano SLX CS-M7100 12-speed 10-51t Chain Shimano SLX M7100 12-speed Crankset Shimano SLX S1:165mm S2-S5: 170mm S6: 175mm Chainrings 30T Bottom Bracket Shimano BB-MT800 Threaded WHEELS Rims Specialized 29 hookless alloy 30mm inner width tubeless ready Front Hub Shimano MT400-B Centerlock 28h 15x110 Boost Rear Hub Shimano MT510-B Centerlock 28h 12x148 Boost Microspline Spokes DT Swiss Industry Front Tire Butcher GRID casing GRIPTON® T7 compound 29x2.3' Rear Tire Purgatory GRID casing GRIPTON® T7 compound 29x2.3' Inner Tubes Standard Presta valve * Specifications are subject to change without notice
When we developed the Tarmac Disc we didn't just want it to be fast. We wanted it to be fast everywhere. Long climbs windy flats Grand Tour stages local fondos—we built a race bike to be the most complete out there. How’d we do it? We started with our Rider-First Engineered™ frame with a perfectly-tuned ride quality for every size added in some serious aero tech that makes it 30 seconds faster over 40 kilometers than the Tarmac SL5 and then made it 20% lighter. Nothing is lighter faster and better handling. This Tarmac comes with a reliable spec that includes Shimano 105 mechanical shifting and quick-stopping hydraulic disc brakes durable DT R470 Disc wheels and our fan-favorite Power saddle. For the construction of the Tarmac we utilized advanced aerospace composite optimization software to revolutionize the construction and layup of our new FACT 9r carbon. 500 pieces creating 7 different sizes with the same tuned ride–that’s Rider-First Engineered™. We examine every ply of carbon on every frame size to ensure that all of our performance targets come through. To make sure you get the perfect ride every frame gets a unique layup schedule with different ply arrangements orientations quantities of material in specific areas and sometimes even exclusive thicknesses and types of carbon itself. Aerodynamics is the most important thing we can do to make you faster but with the Tarmac we added aero features without any cost to weight. Through development areas were discovered where we could add aero for free—a new fork shape and dropped seatstays with aero tubes. The result? A Tarmac that’s approximately 30 seconds faster over 40 kilometers. The updated the geometry is based on countless Retül data points and professional rider input. This enabled us to develop a Performance Road Geometry that perfects the combination of a responsive front-end and short wheelbase which delivers instantaneous response and optimal power transfer. Tarmac SL6 Sport Technical Specifications FRAMESET Frame Tarmac SL6 FACT 9r carbon Rider-First Engineered™ threaded BB clean routing 12x142mm thru-axle flat-mount disc Seat Binder Specialized Alloy 30.8mm Suspension Fork FACT carbon 12x100mm thru-axle flat-mount disc COCKPIT Handlebars Specialized Shallow Drop 6061 70x125mm 31.8mm clamp Stem Specialized Pro SL alloy 4-bolt Tape Roubaix S-Wrap Saddle Body Geometry Power Sport steel rails SeatPost S-Works FACT carbon 27.2mm 20mm offset BRAKES Front Brake Shimano 105 Hydraulic disc Rear Brake Shimano 105 Hydraulic disc DRIVETRAIN Shift Levers Shimano 105 R7020 hydraulic disc Front Derailleur Shimano 105 R7000 braze-on Rear Derailleur Shimano 105 R7000-GS medium cage Cassette Shimano 105 R7000 11-speed 11-30t Crankset Shimano 105 R7000 HollowTech 2 11-speed Chainrings 50/34T Bottom Bracket Shimano Threaded BSA BB Chain KMC X11 Extra Lightweight 11-speed WHEELS & TIRES Front Wheel DT Swiss R470 rim 20mm internal width tubeless ready 24h Specialized full sealed bearing thru axle hub centerlock disc DT Swiss Champion 14G stainless steel spokes DT Swiss brass nipples. Rear Wheel DT Swiss R470 rim 20mm internal width tubeless ready 24h Specialized full sealed bearing thru axle hub centerlock disc alloy freehub body DT Swiss Champion 14G stainless steel spokes DT Swiss brass nipples. Front Tire Turbo Pro 60 TPI folding bead BlackBelt protection 700x26mm Rear Tire Turbo Pro 60 TPI folding bead BlackBelt protection 700x26mm Inner Tubes Presta 48mm valve * Specifications are subject to change without notice
The New Cutting Edge.Scalpel SE is the ultimate marathon racer and high-speed trail slayer. World Cup fast and all-mountain fierce – this is next-level cross-country mountain bike performance.HighlightsLightweight carbon FlexPivot frame / RockShox SID 120mm fork,Shimano Deore/XT 12-speed shifting / Shimano MT501 hydro disc brakes,Stan's NoTubes Crest D tubeless-ready rims / Cannondale DownLow dropper postSuperior suspension. Superior traction.,Scalpel SE’s patented FlexPivot suspension results in more grip, more control, and more speed. 120mm of plush travel works so well that it feels like so much more – meaning all-day singletrack sessions are a gas..Big trail capabilityScalpel’s progressive XC attitude has evolved even further with a slack and stable 67° headtube angle – combined with shorter stems, bigger tires, dropper posts and bigger travel: if you love riding trails fast, precise and in full control, then this is the bike for you.Light. Stiff. Fast.Don’t settle for just two. Pick all three. With its full carbon frame and new 4-bar FlexPivot suspension, the Scalpel is one of the lightest and stiffest full-suspension mountain bikes available. Built light to go fast = built right to have a blast.
The rougher the ride, the smoother it stays. Lap after lap, the Force Carbon Pro proves that it s comfortable whether you opt for creative or questionable line choices. The balanced geometry on this redesigned long-travel, idler-enhanced Enduro bike feeds your need for gravity and big terrain, with efficient climbing capabilities that ll leave you stoked, not smoked, at the top. Pin it, punch it, plow through it: you ll find plenty of reasons to push it harder with RockShox suspension, SRAM GX/NX Eagle drivetrain and an adjustable rear centre for better stability and agility.Force Carbon 29" Frame, High Pivot LTS SuspensionRockShox Zeb Select+ 170mm travelRockShox Super Deluxe Select+ shockSRAM GX/NX 12-Speed Eagle DrivetrainMaxxis Assegai 29" 3C MaxTerra EXO+ Front tyreMaxxis Minion DHR II 29" 3C MaxTerra EXO+ Rear TyreSRAM Code R 4-piston brakesSize Chart:
A whole new breed of XC Hardtail, purpose built to hurt ‘em on the ups, drop ‘em on the downs and propel you straight to the top step.Confidence on edgeNo hesitant, fistful-of-brakes descending here. The ultra slack, 66.5° front end gives you the stability and control you need to really open it up on the downhills. Brake later. Corner harder. Pass on the descents.Stay Centered Scalpel HT’s Proportional Response sizespecific chainstays and steep seat angle keep you balanced between the wheels for better traction and power on the ups, and more confident control on the downs.Drop the chatterSculpted flex zones in the chainstays partner with dropped seatstays to eat up the chatter from rowdy terrain, boosting control, smoothing the ride, minimizing fatigue. Go harder. Go faster. Go farther.
Fast just got faster.A pure road bike. Light smooth and ultra fast. The evolution of the classic race machine. Where it thrives In competition the open road up and down hills What it's built for Speed agility handling Highlights Lightweight low-drag carbon frameset SRAM Rival AXS wireless shifting DT Swiss R470 wheelset / carbon SAVE SystemBar Specs DRIVETRAIN Bottom Bracket SRAM DUB PF30A Road 73mm Chain SRAM Rival 12-speed Crank SRAM Rival DUB X-Range 48/35 Front Derailleur SRAM Rival eTap AXS braze-on Rear Cogs SRAM Rival XG-1250 10-36 12-speed Rear Derailleur SRAM Rival eTap AXS Shifters SRAM Rival eTap AXS HRD FRAMESET Fork SuperSix EVO Carbon SAVE integrated crown race 12x100mm Speed Release thru-axle flat mount disc internal routing 1-1/8' to 1-1/4' steerer and 55mm offset (44-54cm) 1-1/8' to 1-3/8” steerer and 45mm offset (56-62cm) Frame SuperSix EVO Carbon integrated cable routing w/ Switchplate 12x142 Speed Release thru-axle SAVE PF30a flat mount disc integrated seat binder Headset Integrated 1-1/8' - 1-1/4' (44-54cm) 1-1/8' - 1-3/8' (56-62cm) WHEELS Front Tire Vittoria Rubino Pro Bright Black 700 x 25c Hubs (F) Formula CL-712 12x100mm centerlock / (R) Formula RXC-400 12x142mm centerlock Rear Tire Vittoria Rubino Pro Bright Black 700 x 25c Rims DT Swiss R470 db 28h Spokes Stainless Steel 14g Tire Size 25 Tires Vittoria Rubino Pro Bright Black 700 x 25c Wheel Size 700c BRAKES Brake Levers SRAM Rival eTap AXS HRD Brakes SRAM Rival hydraulic disc 160/160mm Paceline rotors COMPONENTS Grips Cannondale Bar Tape 3.5mm Handlebar HollowGram SAVE SystemBar Carbon 8 deg. pitch adjust Saddle Fizik Aliante Delta S-alloy rails Seatpost HollowGram 27 SL KNØT Carbon 2 bolt clamp 330mm 0mm offset (44-48cm) 15mm offset (51-62cm) Stem HollowGram KNØT Alloy w/ cable cover -6°
FEATURESWhether your goal is to escape on gravel back roads, far from cars and crowds, or drop the hammer at the front of your favorite gravel race, no bike does it better than the new Diverge. It's quite simply the fastest, most capable - and just maybe the most fun - bike we've ever made, delivering a ride that's quick and lively under power, but stable and confidence inspiring when the terrain gets rough. From Future Shock 1.5 and all-new gravel geometry, to category leading tire clearance, the new Diverge represents everything we've learned over more than 40 years of riding road, gravel and dirt. The Diverge writes an entirely new chapter in the gravel bike category, so you can dream up entirely new rides. It's the ultimate getaway vehicleGravel riding may be a ‘new’ sport, but our Diverge Sport Carbon has been developed thanks to over four decades of experience. It’s got our Future Shock 1.5 and a FACT 8r carbon frame for a fast, confident and comfortable ride on road, in the dirt, and over thick gravel. With gravel-inspired SRAM Apex 1 1x11 shifting and DT Swiss G540 wheels the Diverge Sport’s as capable as it is versatile. With Kanza winning Pathfinder Pro 38mm tires, the same rubber we spec on the S-Works Diverge, you’re ready to ride as fast and as far as you want.With a FACT 8r carbon frame, the Diverge Sport frame is incredible capable and race bike light. Pin it for your local dirt climb KOM, or grind up a giant back country peak, the light and lively Diverge will get you there faster.,Speed, control and confidence - Future Shock 1.5 is ideal technology for the gravel rider. With 20mm of axial compliance, Future Shock 1.5 is progressively tuned specifically for gravel riding. This keeps you confident and in control, able to keep the power down and stay off the brakes over rough dirt roads and in thick loose gravel, all while keeping your hands, arms and neck fresh.,We tossed gravel geometry ‘status-quo’ out the window. The new Diverge has the most progressive geometry we’ve ever created for a drop bar bike, giving riders a capable and stable bike in the dirt, that still feels responsive and nimble on the road. We’ve increased the frame’s reach, introduced a slacker head tube and a longer offset fork. All this creates incredible confidence with a planted feeling in the dirt, while spec’ing shorter stems keeps the overall cockpit length the same and the steering lively. We’ve kept the bike’s BB low to increase stability, but high enough to utilize with 650b wheels if that’s your jam.,We’ve given the Diverge plenty of rack mounts, including fork and top tube mounts, to ensure you can take what you need, no matter how far you plan to go, or how long you plan to stay out.,Nothing unlocks a bike’s capability like tire clearance, so we gave the new Diverge a whopping 47mm of tire clearance with a 700c wheel and 2.1” with a 650b wheel. Thanks to a drive side chain stay utilizing a solid beam of carbon behind the chain rings we’ve created clearance without using a fragile dropped chain stay design or increasing chain stay length..
Nukeproof Reactor 275 Elite Carbon Bike (SLX - 2022)Strong, light and responsive, the Reactor 275 Elite Carbon is a full suspension ride that’s built to take on the harshest trails and own them. At its heart there is a unidirectional (UD) full carbon frame and it has Fox Float Performance Elite suspension to smoothly soak up the rough stuff. Plus, with a Shimano SLX 12-Speed drivetrain, you’ll be flying up the climbs and getting up to speed in an instant.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Frame Construction:To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable Geometry:All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension Design:To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Fork: Fox 36 Float, Performance Elite Series, Grip 2 Damper, 160mm, 44mm Offset, BOOST, Black Shock: Fox Float X, Performance Elite Series, 2 Position, LV EVOL, Custom CM+, RM, Rezi LM, 210x55mm, Bearing End, 1x 0.3 spacer fitted. Front Wheel: Nukeproof Horizon V2 27.5", 6 Bolt, 110x15mm Rear Wheel: Nukeproof Horizon V2 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 27.5x2.5" WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5x2.4" WT 3C MaxxTerra/EXO+/TR Crankset: Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco, 203mm Rear Rotor: Brakco, 180mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand-X Ascend internal with Brand-X Remote lever, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: TBC Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information.Key Specifications:Material: Ultra Strong T700/800 Monocoque Carbon FibreFork Travel: 160mmAxle to Crown: 549mmFork Offset: 46mmRear Travel: 140mmWheels Size: 27.5"Max Tyre Size: 2.6"Recommended Shock Sag (Measured seated): 30%Shock Size: 210x55mmShock Hardware F: 25x8mmShock Hardware R: 30x8mmSizing: S/M/L/XLHeadtube: 44-56mm Tapered Semi-IntegratedHeadset: ZS44-28.6 - T2 / ZS56/40 - B8Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS)Seatpost: 31.6mm (Internal Routing for Dropper Seatpost)Seat Clamp: 36.4mmBB: Threaded 73mm BSARear Hub: Boost 148x12mmRear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm)Chain Guide: ISCG05Brake Mount: 180mm Direct PostProtection: 3D Contoured Rubber Frame Protection for DT/SS/CSTechnologies: Flip Chip Adjustable Suspension Geometry: All models of the Reactor feature a "flip-chip", so that the bike geometry can be easily adjusted from "Trail" to "Rail" mode without having to custom tune your suspension setup. The Trail setting is best suited for pumping and carving your rhythm and style into the mountainside and still caters for rides who love the climb as much as the descent. On the other hand, the Rail setting turns the Reactor into an adrenaline-fuelled gravity tamer. Dropping the bottom bracket height by 6mm and slackening the head angle by half a degree, these changes give this Reactor greater stability and control when the trail leans downhill towards vertical Nukeproof 4-Bar Horst Linkage Suspension Design: Ensuring the bike can climb as well as it descends, Nukeproof focussed on fine-tuning their 4-Bar Horst linkage suspension setup to give higher levels of anti-squat performance when higher up the cassette in the climbing gears, but also to deliver greater trail-gobbling performance when you drop down the cassette and begin descending the mountain. This means that the bike behaves itself on the climbs and grips with unprecedented traction and efficiency when making your way back towards sea-level. When you get it up to speed and drop a few gears to carry momentum, this bike turns into a trail hooligan and helps you carve the trail with style. The combination of low anti-squat and progressive suspension-rate give it the ultimate in small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. With balanced anti-rise suspension performance, the Reactor provides some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure stability and traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any rideEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for kids’ bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is kids’ bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 36 Float, Performance Elite Series, Grip 2 Damper, 160mm, 44mm Offset, BOOST, Black • Shock: Fox Float X, Performance Elite Series, 2 Position, LV EVOL, Custom CM+, RM, Rezi LM, 210x55mm, Bearing End, 1x 0.3 spacer fitted. • Front Wheel: Nukeproof Horizon V2 27.5", 6 Bolt, 110x15mm • Rear Wheel: Nukeproof Horizon V2 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Assegai 27.5x2.5" WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5x2.4" WT 3C MaxxTerra/EXO+/TR • Crankset: Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline • Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus • Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink • Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads • Front Rotor: Brakco, 203mm • Rear Rotor: Brakco, 180mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Brand-X Ascend internal with Brand-X Remote lever, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm Axle to Crown: 549mm Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.