The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
Sidi Wire 2 Carbon Matt Road ShoesEnsure your footwear becomes the shining light of your road ride with the Wire 2 Carbon Matt Road Shoes from Sidi. Kitting you out in cycling’s latest revolution, the impressive finish on these shoes guarantees you stand out from the crowd and their style, grace and outstanding technology revolutionise the way you ride.Wire Yourself InOffering a look into the future of road cycling, the Wire 2 Carbon Matt Road Shoes have been crafted with a vent carbon sole that adjusts the intake of air to suit your foot’s every need. They keep things cool when the intensity rises and work in tandem with a microfibre tech-pro upper to take comfort to a whole new level. Unrivalled when it comes to how they feel, the upper’s fabric is made in Italy and is eco-friendly for those that like doing their bit for the environment. Resistant, stable and ever so lightweight, speed and performance certainly aren’t compromised in order to lavish comfort on your ride.Unrivalled ComfortIf the vent carbon sole and microfibre tech-pro fabric wasn’t enough, Sidi have gone one step further with the addition of the techno 3 push closure system. Fitted in two different locations, adjustable fittings on the side and tongue of the foot welcome customisable comfort to the table, securing your foot firmly in place while at the same time removing hot spots. Allowing for on-the-fly edits, there is now no need to pull over and lose precious seconds from your time.Technology:Vent Carbon SoleA replaceable polyurethane heel pad and adjustable air intake give your shoe excellent breathability. The lightweight and stiff properties of the Vent Carbon Sole allow for high performing power transfers and it is designed with integrated vent and air channels to dissipate heat and improve air flow.If that wasn't enough, the weave pattern carbon fibre construction maximises the soles stiffness while allowing for a small degree of flex in the toes. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. To ensure you select the right option, the sole is 3 bolt fitting only.Techno-3 PushDialling in your fit to the entire length of your shoe, Sidi’s outstanding Techno-3 push system adapts to your upper shape of the foot to provide adjustable comfort 24/7. The brand’s famously reliable and replaceable closures welcome a new proprietary wire material that eliminates binding to deliver on-the-fly adjustments, while a push buckle is both serviceable and replaceable. Offering an innovative push button, lifting your buckle and adjusting your fit quickly and efficiently will revolutionise the way you ride.Adjustable Heel Retention DeviceThere’s nothing better than being able to adjust your retention device to suit your fitting. Sidi’s creation reinforces the top of the heel cup to improve your fit at the rear. It secures the heel with a tightened top and stability is guaranteed to keep your cadence explosive without compromising your fitting. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Lightweight, easy to use, and replaceable.Features:Please Note: Sidi recommend purchasing one whole size up from your usual fitMatt finishMicrofibre Tech-Pro matt fabric upperVent carbon sole with adjustable air intakeSoft Instep 4Techno 3 Push closureAdjustable heel retention deviceReplaceable heel padComfort fit insoleBuy Sidi from Chain Reaction Cycles, the World's Largest Online Bike Store.
Sidi Wire 2 Carbon Matt Road ShoesEnsure your footwear becomes the shining light of your road ride with the Wire 2 Carbon Matt Road Shoes from Sidi. Kitting you out in cycling’s latest revolution, the impressive finish on these shoes guarantees you stand out from the crowd and their style, grace and outstanding technology revolutionise the way you ride.Wire Yourself InOffering a look into the future of road cycling, the Wire 2 Carbon Matt Road Shoes have been crafted with a vent carbon sole that adjusts the intake of air to suit your foot’s every need. They keep things cool when the intensity rises and work in tandem with a microfibre tech-pro upper to take comfort to a whole new level. Unrivalled when it comes to how they feel, the upper’s fabric is made in Italy and is eco-friendly for those that like doing their bit for the environment. Resistant, stable and ever so lightweight, speed and performance certainly aren’t compromised in order to lavish comfort on your ride.Unrivalled ComfortIf the vent carbon sole and microfibre tech-pro fabric wasn’t enough, Sidi have gone one step further with the addition of the techno 3 push closure system. Fitted in two different locations, adjustable fittings on the side and tongue of the foot welcome customisable comfort to the table, securing your foot firmly in place while at the same time removing hot spots. Allowing for on-the-fly edits, there is now no need to pull over and lose precious seconds from your time.Technology:Vent Carbon SoleA replaceable polyurethane heel pad and adjustable air intake give your shoe excellent breathability. The lightweight and stiff properties of the Vent Carbon Sole allow for high performing power transfers and it is designed with integrated vent and air channels to dissipate heat and improve air flow.If that wasn't enough, the weave pattern carbon fibre construction maximises the soles stiffness while allowing for a small degree of flex in the toes. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. To ensure you select the right option, the sole is 3 bolt fitting only.Techno-3 PushDialling in your fit to the entire length of your shoe, Sidi’s outstanding Techno-3 push system adapts to your upper shape of the foot to provide adjustable comfort 24/7. The brand’s famously reliable and replaceable closures welcome a new proprietary wire material that eliminates binding to deliver on-the-fly adjustments, while a push buckle is both serviceable and replaceable. Offering an innovative push button, lifting your buckle and adjusting your fit quickly and efficiently will revolutionise the way you ride.Adjustable Heel Retention DeviceThere’s nothing better than being able to adjust your retention device to suit your fitting. Sidi’s creation reinforces the top of the heel cup to improve your fit at the rear. It secures the heel with a tightened top and stability is guaranteed to keep your cadence explosive without compromising your fitting. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Lightweight, easy to use, and replaceable.Features:Please Note: Sidi recommend purchasing one whole size up from your usual fitMatt finishMicrofibre Tech-Pro matt fabric upperVent carbon sole with adjustable air intakeSoft Instep 4Techno 3 Push closureAdjustable heel retention deviceReplaceable heel padComfort fit insoleBuy Sidi from Chain Reaction Cycles, the World's Largest Online Bike Store.
Keep it low and aero without sacrificing comfort. The carbon-railed ultra lightweight S-Works Romin EVO is a high-performance road saddle that's contoured to put you in a position for optimal power transfer and comfort as you put pressure on your competition. The Body Geometry channel is designed to maximize blood flow while the saddle allows you to maintain comfort easily even while in a competitive more aerodynamic position. And when you add in a FACT carbon fibre shell our medium density Level Two padding and oversized carbon rails you have a saddle that's ready for anything. Patented Body Geometry design is lab-tested to assure blood flow to sensitive arteries. FACT carbon fibre shell is flex-tuned for support and ride compliance. Ultra-light strong and oversized FACT carbon rails. Level 2 padding: Medium density foam for bike feel with additional cushioning. Size 143mm / Weight 134g Size 155mm / Weight 137g NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.