Look Keo Blade Carbon Ceramic Road PedalsSitting at the top of Look’s road range, the Keo Blade Carbon Ceramic pedals have the construction and aerodynamics to make the most of your power output. Weighing only 290 grams for the pair, they’re the pedal of choice for multiple race-winning World Tour professionals and are ready for both aggressive racing and long-distance rides.Efficient Pedals with Ceramic BearingsLook has given them ceramic bearings to ensure the highest level of quality and performance while delivering a long lifespan. Additionally, their optimised, oversized and water-resistant spindle saves approximately two watts at 100 revolutions per minute (rpm). These pedals are perfect for gaining an edge over your competitors without sacrificing any weight.Features:Material: Body: Carbon Fibre with Stainless-Steel platform; Spindle: Chromoloy (CrMo) Steel; Bearings: Ceramic Use: Road raceAxle Size: Standard 9/16" threadTension: Pedals come installed with 12Nm carbon blades and come with additional 16Nm carbon blades (20Nm carbon blades sold separately)Cleats Included: Yes, Keo 3-bolt cleats (grey type)Float: 4.5° grey cleats included (black 0° and red 9° cleats available separately)Stack Height: 14.8mmDistance Pedal Spindle / Crank Arm (Q Factor): 53mmPlatform Width: 67mmPlatform Surface Area: 700mm2Pair or Single: Pair Weight: 110g (290g per pair with cleats and screws)Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look Keo Blade Carbon Road PedalsDesigned for road cycling, the Keo Blade Carbon Road Pedals from Look are made from lightweight carbon and feature a durable Chromoly (CrMo) axle and hard-wearing stainless-steel bearings for a winning combination to enhance your pedal power.Features: Body Material: Carbon Blade Material: Carbon Axle Material: CrMo Bearing Material: Stainless Steel Use: Road Pedal Type: Clip-in Cleat Type: Keo Cleats Platform Area: 700mm² Platform Width: 67mm Pedal Tension: 8Nm (pedals also come with 12Nm blades) Part Number: PEKBC23407 Weight: 230g (approx.)Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look Keo Blade Carbon TI Axle PedalsThese superb pedals are engineered for top-performance road cycling as they deliver unbeatable lightness and impressive aerodynamics. They feature a carbon body and blade material which has made them an excellent choice for many of the greatest riders of the World Tour peloton. This means you can also enjoy their fantastic strength to weight ratio as you soar past your competitors and towards the podium. Lightweight Carbon Clip-In PedalsDesigned for winning, these awesome components are also kitted out with ceramic bearings which transfer 100% of your pedalling power through your drivetrain. When combined with a wide contact area, you'll notice your feet becoming one with the pedals as they feel like a natural extension of your limbs. One final highlight is they weigh in at only 190g without cleats, so you won't have to worry about adding any unnecessary grams to your ride.Features: Body Material: CarbonBlade Material: Carbon Axle Material: Titanium Bearing Material: Ceramic Use: Road Type: Clip-in Platform Width: 67mm Platform Area: 700mm² Part Number: PEKBCCT22008 Weight: 190g (approx)Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Look Keo Blade Carbon Ceramic Track PedalsThese clipless pedals are specifically designed for fast-paced track cycling. They feature a stiff carbon body construction, which means that you'll benefit from their fantastic durability as well as their lightweight on your ride. Delivering the reassuring feeling of the security of a strap, these pedals use a control roller that adjusts pedal opening and also triggers the release of your foot in the event of a fall.THE EXPERTISE OF THE BEST ROAD CYCLING PEDAL, NOW AVAILABLE ON THE TRACK Maintain the feeling of being at one with your track bike, just as you would with toe straps around your feet. But with a bonus: your power transfer is greatly improved. The carbon blade and ceramic bearings are also a large part of the equation. Lighter feet, faster pedaling thanks to a total weight reduced 15% compared to pedals with straps. Be aerodynamic, and safe! The control roller, a feature hidden beneath the pedal to free the foot of straps, reduced the frontal area of the pedal and improves aerodynamic performance.Features: Spindle Material: CrMo Bearings: Ceramic Body Material: Carbon Platform Area: 700mm2 Platform Width: 67mm Q Factor: 53mm Retention: Serial installed in 16 - With track control roller Cleats: KEO CleatStack Height with Cleats: 14.8mm (8.5+6.3mm) Pedal Weight: 121g Pedals with Cleats Weight: 310gBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FEEL THE NEW X-PERIENCE LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism is resistant to the negative effects of coming into contact with various external factors (rocks roots mud…) and provides consistent and reliable performance over time. Its spindle equipped with a double weather-resistant seal has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride and therefore more fun. TECHNOLOGY THE BEST POWER TO WEIGHT RATIO All the energy you produce is transferred to your MTB through your pedals. Their role is therefore crucial. LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking the greater the contact surface the more efficiently energy is transferred. On the other hand the greater the contact surface the more the pedal will weigh. The challenge faced by our engineers was therefore to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market. LATERAL CONTACT SUPPORT Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. MECHANISM GEOMETRY The mechanism works regardless of external conditions (in the mud forces are significantly different from those encountered when dry) more space allows for the shedding of various foreign matter (mud sand…). These zones give the user a constant and stable feeling of being securely clipped in in all conditions. ADJUSTABLE TENSION An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level. FEATURESUSE: XC Competition and LeisureTENSION: 6 to 14BODY: CarbonSPINDLE: Chromoly +FLOAT: 6°PLATFORM MATERIAL: ChromolyPLATFORM AREA: 515 mm²PLATFORM WIDTH: 60 mmSTACK HEIGHT + CLEATS: 168 mm (107 + 61 mm)WEIGHT PEDAL: 170 gWEIGHT PAIR + CLEATS: 444 gGUARANTY: 2 years
Designed to win the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to the daily input from the greatest of champions. Lightweight aerodynamic powerful the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. Technology: BLADE CARBONTention: 12 or 16 or 20Body: CARBONSpindle: CHROMOLY +Platform Material: STAINLESS STEEL / INOXPlatform Area: 700mm²Platform Width: 67mmStack Height + Cleats: 148mmWeight Pedal: 110gWeight Pair + Cleat: 288g
LOOK KEO 2 MAX CARBON PEDALS WITH KEO GRIP CLEAT RIDE AT YOUR BEST THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodelled the shape of the KEO 2 MAX giving it a new slimmed down line yet a wider contact surface increasing its style and efficiency. TECHNOLOGIES OPTIMIZED CONTACT SURFACE The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep regardless of the position of your foot (depending upon the angular float you use) the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface without any additional weight gain improves the Power to Weight ratio making the product even better and allowing you to perform at your best. IMPROVED SPINDLE PROFILE The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle it is composed of an axle with an inner ball bearing and a needle roller bearing located under the contact surface to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer previously used to hold the needle roller bearing in place has been replaced with a conical spacer. This technical solution reduces friction increases fluidity and by consequence decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. SPECIFICATIONSUSAGE: Recreational to CompetitionBODY: CarbonAXLE: Chromoly +PEDAL STACK HEIGHT + CLEATS: 173 mmCONTACT SURFACE AREA: 500 mm²FLOAT: 8 or 12 adjustable springCLEATS: Kéo Grip CleatsPEDAL WEIGHT: 125 gr (312 gr per pair with cleats and screws)COLOURS: BlackACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years
Feel The New X-PerienceLook constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.The Best Power To Weight Ratio: All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial. Look’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why Look has chosen to place the weight/contact surface ratio as the primary factor when defining the product.Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed Look to engineer a pedal with the best weight / contact surface ratio on the market.Lateral Contact Support: Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.Mechanism Geometry: The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.Adjustable Tension: An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.Key Features:Usage: XC Competition and Leisure,Tension: 6 to 14,Body: Carbon,Spindle: Chromoly +,Float 6°,Platform Material: Chromoly,Platform Area: 515 mm²,Platform Width: 60 mm,Stack Height + Cleats: 16,8 mm (10,7 + 6,1 mm),Weight Pedal: 170 g,Weight Pair + Cleats: 444 g,Warranty: 2 years.
Ride At Your BestThe new KEO 2 Max is the best product that will give you the confidence you need to go beyond your personal limits.The Look design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.Optimized Contact Surface: The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.Improved Spindle Profile: The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Key Features:Usage: Recreational to Competition,Body: Carbon,Axle: Chromoly +,Pedal Stack Height + Cleats: 17,3 mm,Contact Surface Area: 500 mm² ,Float: 8 or 12 adjustable spring,Cleats: Kéo Grip Cleats,Pedal Weight: 125 gr (312 gr per pair with cleats and screws),Accessories: A pair of Grey Kéo Grip cleats + screws,Guaranty: 2 years.
Designed to win, the new KEO BLADE CARBON CERAMIC improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON CERAMIC has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON CERAMIC is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.The KEO BLADE CARBON CERAMIC has the best weight / power ratio in its class.Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon Ceramic is available in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.Every component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometer. They are then ordered according to size in perfectly-adapted rings, with the result that every bearing has a totally unique structure.The spindle of the new CARBON BLADE CERAMIC has been completely redesigned. It is built around an oversized axle and spindle that passes through internal roller and ceramic bearings located directly under the pedal platform. This new construction saves approximately 2 watts at 100 rpm.To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.The platform of the CARBON BLADE CERAMIC is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.
The Look Keo Blade Carbon improves the performance and experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to the daily input from the greatest of champions. Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours.The Keo Blade Pedals are currently being used by 7 UCI World Tour Teams including Lotto-Soudal, Astana-Premier Tech and AG2R CITROEN LA MONDIALE and more. Lightweight, aerodynamic and powerful, this pedal provides the riders with an incredible platform to keep improving and optimizing performance on the road to victory.Key Features:Technology: Blade Carbon,Tention: 12 or 16 or 20,Body: Carbon,Spindle: Chromoly +,Platform Material: Stainless Steel/INOX,Platform Area: 700mm²,Platform Width: 67mm,Stack Height + Cleats: 14,8mm,Weight Pedal: 110g,Weight Pair + Cleat: 288g,.
Look keo blade carbon ceramic bearing ti axle with keo cleat 16nm with 12nm spare.Blade carbon pedalOur elite-level, top-of-the-range weapon designed for pure racing performance. The unique, patented blade technology is combined with the unequaled properties of ceramic bearings and look’s signature power-to-weight ratio, ensuring the pedal comes straight in as a reference on the market.CeramicFaster - longerEvery component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometer. They are then ordered according to size in perfectly-adapted rings, with the result that every bearing has a totally unique structure.Longer lifeA long lifespan is the main advantage of ceramic bearings. Rounder and harder than traditional balls, they are less sensitive to dust or deposits and guarantee consistent, durable performance. Furthermore, ceramic is not subject to corrosion. These physical properties ensure the bearings have a lifespan 4 to 6 times longer than standard steel bearings.SmootherReduced friction is the best-known and most characteristic advantage of ceramic bearings. The perfectly circular shape and the hardness of the balls combined with ceramic-specific, optimized greases allows for an 18% reduction of the frictional forces applied to the bearing.SpindleIn order to meet the requirements of the most demanding cyclists, the blade carbon pedals are designed to resist the very worst weather conditions. Particular care is given to each component within the axle to ensure optimal lifespan. The axle is guaranteed waterproof by ipx7 (full immersion) and ipx6 (rotating pedal exposed to water jets) tests. The design of the outer cap and the inside nut have been revised to meet these requirementsBlade technologyLighter – aerodynamic - saferThe use of a carbon blade instead of a conventional metal spring offers numerous advantages:The “blade – lever” system is 20% lighter than a standard “spring – lever” system.The carbon blade blends fluidly into the shape and volume of the pedal, improving the overall aerodynamic properties of the product.The blade technology revolutionizes the engagement/ disengagement experience whilst offering firm and secure support. The bowing of the blade when unclipping means the required disengagement torque is reached more rapidly in the dynamic of the movement, allowing for faster cleat release. Pedaling experience is also improved thanks to a firmer lateral stop.The carbon blade is available in various stiffness options: 12, 16 or 20. The blade can be easily, intuitively and quickly (a few seconds suffice) changed depending on the rider’s clip-in / clip-out preferences.Technology: blade,Retention: serial installed in 16 + additional 12 in box 20 sold separately,Body: carbon,Traction: carbon,Spindle: titanium,Bearings: ceramic,Platform area: 700 mm²,Platform width: 67mm,Q factor: 53mm,Stack height + cleats: 14,8 mm ( 8,5 + 6,3 mm ),Weight (pedal): 95g,Weight pair + cleats: 260g,.