Each seat-post employs 24 individual ‘plies’ of carbon, pre-impregnated with a highly toughened epoxy resin system, designed to ensure a safe and rugged unit. The bulk of the laminate comprises Unidirectional T700 fibre – the highest strength Standard Modulus fibre available. (Unidirectional fibres provide the maximum tensile strength and stiffness with minimum weight.) This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
Measuring 800mm wide, and featuring cut guide marks if you prefer a narrower cockpit, this carbon-constructed riser is a stiff and lightweight addition to your front-end, ideal for weaving your way downhill with utmost control. With increased diameters at the bar bends and a highly durable lamination, the bar is further strengthened against the stress and impacts caused by rough and ready riding. With a 20mm rise and a brilliant sweep range, this Hope handlebar is all set to steer you with composure and confidence.
Hope Carbon Riser BarsDesigned to tackle the toughest of terrains, this Carbon Riser Bar by Hope is ready to steer you through whatever challenge you meet on the trail. Featuring a maximum length of 780mm, you have a versatile sweep range and 20mm rise for enhanced balance and stability. Hard-Wearing, Carbon-Built Mountain Bike BarDurably built to withstand the rough and tumble nature of enduro riding, it is finished with a robust lamination to fend off scuffs and other damage. This riser bar is an excellent addition to any downhill steering column.Features:Material: CarbonUse: Trail / All MountainWidth: 780mmDiameter: 31.8mmRise: 20mmUpsweep: 5°Backsweep: 7°Weight: 225gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Carbon Bike SeatpostDesigned, constructed and extensively tested in the United Kingdom (UK), Hope has packed its very best construction techniques into its Carbon Bike Seatpost. It brings you the strength and performance needed to ride your bike at its limit. Lightweight and stiff enough for cross country (XC) racing and tough enough for riding aggressive downhill (DH) trails, it also has super-fine angle adjustment for obtaining the perfect saddle position.Each seat-post employs 24 individual "plies" of carbon, pre-impregnated with a highly toughened epoxy resin system, designed to ensure a safe and rugged unit. The bulk of the laminate comprises Unidirectional T700 fibre - the highest strength Standard Modulus fibre available. (Unidirectional fibres provide the maximum tensile strength and stiffness with minimum weight.) The strategically positioned plies of 3K twill woven fabric, add hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply also contributes in this respect, together with a super smooth finish and striking visual aesthetic.Features: Material: High strength Carbon Fibre with aircraft grade aluminium seat rail clamps Layback/Offset: 15mm Use: Road, Mountain Bike Smooth internal surface finish removes any unnecessary resin-rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on the Eternity Seatpost 100% designed, tested and manufactured in Barnoldswick, EnglandWeight: 27.2mm: 185g; 30.9mm and 31.6mm: 220gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Carbon Bike SeatpostDesigned, constructed and extensively tested in the United Kingdom (UK), Hope has packed its very best construction techniques into its Carbon Bike Seatpost. It brings you the strength and performance needed to ride your bike at its limit. Lightweight and stiff enough for cross country (XC) racing and tough enough for riding aggressive downhill (DH) trails, it also has super-fine angle adjustment for obtaining the perfect saddle position.Each seat-post employs 24 individual "plies" of carbon, pre-impregnated with a highly toughened epoxy resin system, designed to ensure a safe and rugged unit. The bulk of the laminate comprises Unidirectional T700 fibre - the highest strength Standard Modulus fibre available. (Unidirectional fibres provide the maximum tensile strength and stiffness with minimum weight.) The strategically positioned plies of 3K twill woven fabric, add hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply also contributes in this respect, together with a super smooth finish and striking visual aesthetic.Features: Material: High strength Carbon Fibre with aircraft grade aluminium seat rail clamps Layback/Offset: 15mm Use: Road, Mountain Bike Smooth internal surface finish removes any unnecessary resin-rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on the Eternity Seatpost 100% designed, tested and manufactured in Barnoldswick, EnglandWeight: 27.2mm: 185g; 30.9mm and 31.6mm: 220gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Carbon 35 HandlebarComing equipped with a stiff carbon build, this mountain bike (MTB) riser handlebar offers excellent strength and durability while also keeping its weight to a minimum. Coming kitted out with five degrees upsweep and seven degrees backsweep, this model delivers increased comfort and control as you weave from trail to trail. Developed as a perfect all-rounder, this is a great choice of upgrade for confident and precise steering performance on your favourite local trails.All Mountain Carbon Riser HandlebarHope might be a little late to the 35mm handlebar party, but its updated riser bar should prove to be worth the wait. After much time and thought, the brand opted on using a completely new carbon laminate construction with a genuinely revolutionary manufacturing technique. The end result is a bar that minimises vibrations, maximises feel, and is even more compliant than Hope's existing 31.8mm model, without sacrificing strength. It's designed for 'all mountain' use but Hope is pleased to say that it turned out stronger than a lot of downhill (DH) bars that they tested during development.Available 800mm wide with a 20mm rise, the Hope Carbon 35 Handlebar is designed, tested and manufactured in Barnoldswick, UK.Features: Material: Carbon Use: Mountain Bike (MTB) Width: 800mm Diameter: 35mm Rise: 20mm Upsweep: 5 degrees Backsweep: 7 degrees 100% designed, tested and manufactured in Barnoldswick, UK Weight: 225gManufacturer's Part Number: HHB008SBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Hope Carbon Handlebar has finally arrived! 100% designed, tested and manufactured in Barnoldswick UK for unbeatable riding performance.Full Carbon ConstructionWidth: 780mmRise: 20mmUpsweep: 5 degBacksweep: 7 degDiameter: 31.8mmRecommended Use: Trail / All MountainWeight: 225g
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Carbon Seatpost from Hope Technology is light but extremely strong making it suitable for most cycling disciplines. From cross country racing to downhill and road bikes, this UK manufactured seatpost is ready for anything. 100% designed, tested and manufactured in Barnoldswick, EnglandSmooth internal surface finish removes any unnecessary resin rich areas to minimise weightVarying wall sections to optimise weight and areas of high stress concentrationsSame ultra-fine seat rail adjustment as tried and proven on our previous Eternity Seatpost15mm layback / Weight: 27.2mm 185g, 30.9mm & 31.6 220gThese seatposts have been built using 24 individual piles of carbon with highly toughened epoxy resin system that delivers a safe, strong and rugged seatpost. The laminate comprises unidirectional T700 fibre which is the highest strength standard fibre available. This provides maximum tensile strength whilst keeping weight to a minimum. This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.