Stay Strong V3 Carbon Pro Race Rim. Sold individually for riders wishing to run a disc setup on their bikes, no breaking surface needed on the rear so two front rims for a cleaner look. ###section### Product Specs WHEEL SIZE: 20" SEAM: Carbon ERD: 336mm HEIGHT: 30mm WIDTH: 30mm SPOKE HOLES: 36 WEIGHT: TBC
WTB CZR i23 TCS 2.0 Carbon MTB RimSpecifically developed for the demands of modern gravel bike riding, this high-quality rim features an asymmetrical carbon build that allows it to deliver minimal rotational weight and fine-tuned compliance to make you feel at one with the terrain. WTB has also put this model through a series of lab tests and found that its CZR rim is lighter overall, more impact resistant, and laterally stiffer while remaining vertically compliant. After two years of development, this durable rim offers excellent reliability wherever your next gravel bike adventure leads you.Gravel Bike Rim with Tubeless TCS 2.0 TechnologyWTB has equipped this gravel bike rim with its renowned TCS 2.0 technology, which provides a more robust, easily installed, and dependable tubeless system. A recessed channel along its centre allows for the installation of the updated Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tyre and rim. Installation of the stout Solid Strip allows for more pliable, and easy to install, TCS Tape to provide the airtight seal needed for a tubeless system. This means that riders will enjoy tubeless benefits such as the ability to run lower air pressure for greater stability on rough terrain, increased comfort and less chances of punctures or flats.Features: Material: Asymmetrical Carbon Use: Gravel, Adventure Road and Cross Country (XC) Size: 700c/29" Rim Size: 23-622 ERD: 590 Inner Rim Width: 23mm Hole Count: 28 Offset: 3mm Tubeless Tape Width: 28mm Spoke Beds: Reinforced with proven 4D angled spoke hole drilling Max Spoke Tension Range: 110-120KgF Single or Pair: Single Max Rider Weight: 120kg Weight: 345gTechnologies: Reinforced spoke beds, proven 4D angled spoke hole drilling and an asymmetrical design…all the necessary ingredients of an incredibly durable rim. 23mm internal rim width for the gravel-centric. When compared to the competition, WTB lab tests proved its CZR carbon rims to be lighter overall, more impact resistant, and laterally stiffer while remaining vertically compliant. To be precise, its CZR i23 rims were 38% more impact resistant than their direct competition. TCS 2.0 Technology: TCS 2.0 introduces a more robust, easily installed, and dependable tubeless system. A recessed channel along the centre of TCS 2.0 rims allows installation of the updated Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tyre and rim. Installation of the stout Solid Strip allows for more pliable, and easy to install, TCS Tape to provide the airtight seal needed for a tubeless system.Manufacturer's Part Number: W020-0605Buy WTB Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Vento Infinito Carbon 2 Road ShoesDeveloped, tested and refined with professional cyclists, the Fizik Vento Infinito Carbon 2 Road Shoes give you unrivalled levels of comfort and pedalling efficiency. Stamp on the pedals and enjoy the instantaneous response. Supple and StrongWith an upper made from Microtex, the Vento Infinito Carbon 2 Road Shoes give you a fit that is both supple and strong, providing comfort from the very first pedal stroke. It also gives a precise and supportive fit of the foot, ensuring a stable platform during the whole of your crank rotation, driving pedalling efficiency.Customised Fit - BOA Fit SystemTo give a customisable and comfortable fit, the Vento uses the dual Li2 BOA fit system. The Li2 dials have been redesigned to offer a lower profile, marginally improving aerodynamics while also making them less vulnerable to being accidentally hit. Each dial gives quick and easy micro-adjustment, with independent adjustment of the forefoot and instep. Fine-tuning the fit to your particular foot shape is now remarkably easy. R2 Carbon OutsoleThe stiffest and lightest sole unit in the Fizik range, R2 Carbon Outsole delivers incredible responsiveness, with power transferred to your pedals with outstanding efficiency. Jump for a sprint or attack a climb and you're rewarded with immediate acceleration - only fitness is holding you back.Efficient pedalling is also optimised thanks to the cleat track position. This has been set further rearwards to improve pedalling dynamics, reduce knee compression and power transfer - it's especially well-suited to very aggressive, forward aero riding positions.Cleat GuidanceThese Cycling Shoes are compatible with road bike pedal systems that use cleats with 3-bolt standards, such as: Look Delta and Keo, Shimano SPD-SL, Speedplay Light Action, Zero, X-Series (via 3-hole adapter plate), Campagnolo Pro-Fit, Mavic Zxellium, Time Iclic/Xpresso and Time Impact.Features:Knitted PU laminated mesh upperLi2 Dual Zone BOA Fit SystemIndependent fit adjustment for instep and forefootDynamic Arch Support 2.0: tailored fit of the plantar archR2 carbon outsole - full carbon unidirectional, stiffness index 10/103-bolt cleat compatible (cleats not supplied)Weight: 225g (size 42 - 1/2 pair)Buy Fizik Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo Ekar 13 Speed Single Gravel ChainsetStiff, elegant and created for optimum power transfer over challenging terrain, Campagnolo’s 1x13-Speed Ekar chainset boasts carbon fibre crank arms for a low weight with high strength. It combines with the Ekar system to bring you the range, efficiency, durability and chain retention you need to thrive off-road.Gravel Bike ChainsetThe 1x chainset is a crucial element in Campagnolo's gravel & all-road specific Ekar drivetrain design. Lightweight, secure and simple, with no wasted overlapping gears or unnecessary moving parts to collect trail dirt. The Ekar chainset will convince you that one chainring and no front mech is the way to go, whatever your off-road ambitions!Strong Carbon Fibre Crank ArmsDon’t let the apparent simplicity fool you, this chainset has been designed from the ground up. Just like the whole Ekar system, the cranks combine strength and lightweight materials. The 2-piece crankset features a strong, durable 630-grade steel alloy axle mated to a polyamide-carbon spider and beautiful UD Carbon arms. The ergonomics of this chainset mean it is suitable for any size of rider, with 4 crank arm lengths available. The outer chainrings are also easily interchangeable, with no need to disassemble the chainset if you want to alter your gearing.Features: Material: UD Carbon Fibre crank arms, polyamide-carbon spider and Ultra-Torque 630 Steel axle Speed: 1x13-Speed Recommended Chain: Campagnolo Ekar 13-speed Axle Profile: Ultra-Torque integrated axle Designed specifically for Ekar 1x13 groupsets Suitable for Gravel and All-Road riding Crank boots included to protect the crank arms Easily interchangeable chainrings Easy access external bearings Narrow-wide chainring tooth for design efficient drive & maximum chain security Easily interchangeable alloy rings - no need to disassemble crank Narrow Q-Factor of 145.5mm ensures compatibility with all modern frames Bottom bracket cups not included Weight: 615g (based on 172.5mm, 38T)Technologies: Pro-Tech: Patented dual-sealing ProTech technology securely connects the two semi-axles inside the bottom bracket and protects the BB bearings from ingress of water and mud, providing longevity of high performance, even in the worst riding conditions. A gravel-orientated development from Campagnolo's innovative and proven Ultra-Torque technology, the ProTech system's central Hirth joint features self-centring and self-aligning frontal teeth located in the middle of the crank where the ends of the integrated semi-axles meet. Buy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Project 23 Carbon Full Face Helmet features a whole host of materials and technologies to ensure your head gets the finest protection possible while offering an incredibly low weight for a hard-shell lid. Seven iDP chose a Carbon Fibre hardshell construction over the EPS foam core rather than in-moulding a light outer to a foam core, as can be found on most trail helmets. This makes it superb at absorbing impacts, prevents penetration from ground objects and, thanks to the carbon outer, weight is kept low without compromising safety. The CRV (Crash Release Visor) is also designed to snap away in the event of a crash, reducing forces on the neck and head. It simply snaps back into place too, rather than using bolts. The Project 23 Carbon also features the S.E.R.T. system, this acts as a slip-plane system to manage the rotational forces on your head and brain. By minimising and managing the transmission of impact forces to your brain, some 20% greater absorption than standard systems, you're less likely to suffer chronic brain injuries. The 23 vents make this the most ventilated hard-shell full-face helmet currently available. The TF (Through Flow) Goggle ventilation ensures you always have a clear view too, keeping fogging at bay. Size guide: X-Small: 20.75" - 21.25" (53 - 54cm) Small: 21.5" - 22" (55 - 56cm) Medium: 22.5" - 22.75" (57 - 58cm) Large: 23.5" - 23.75" (59 - 60cm) X-Large: 24" - 24.25" (61 - 62cm) XX-Large: 24.8" - 25.1" (63 - 64cm)
The Project 23 Carbon Full Face Helmet features a whole host of materials and technologies to ensure your head gets the finest protection possible while offering an incredibly low weight for a hard-shell lid. Seven iDP chose a Carbon Fibre hardshell construction over the EPS foam core rather than in-moulding a light outer to a foam core, as can be found on most trail helmets. This makes it superb at absorbing impacts, prevents penetration from ground objects and, thanks to the carbon outer, weight is kept low without compromising safety. The CRV (Crash Release Visor) is also designed to snap away in the event of a crash, reducing forces on the neck and head. It simply snaps back into place too, rather than using bolts. The Project 23 Carbon also features the S.E.R.T. system, this acts as a slip-plane system to manage the rotational forces on your head and brain. By minimising and managing the transmission of impact forces to your brain, some 20% greater absorption than standard systems, you're less likely to suffer chronic brain injuries. The 23 vents make this the most ventilated hard-shell full-face helmet currently available. The TF (Through Flow) Goggle ventilation ensures you always have a clear view too, keeping fogging at bay. Size guide: X-Small: 20.75" - 21.25" (53 - 54cm) Small: 21.5" - 22" (55 - 56cm) Medium: 22.5" - 22.75" (57 - 58cm) Large: 23.5" - 23.75" (59 - 60cm) X-Large: 24" - 24.25" (61 - 62cm) XX-Large: 24.8" - 25.1" (63 - 64cm)
The Project 23 Carbon Full Face Helmet features a whole host of materials and technologies to ensure your head gets the finest protection possible while offering an incredibly low weight for a hard-shell lid. Seven iDP chose a Carbon Fibre hardshell construction over the EPS foam core rather than in-moulding a light outer to a foam core, as can be found on most trail helmets. This makes it superb at absorbing impacts, prevents penetration from ground objects and, thanks to the carbon outer, weight is kept low without compromising safety. The CRV (Crash Release Visor) is also designed to snap away in the event of a crash, reducing forces on the neck and head. It simply snaps back into place too, rather than using bolts. The Project 23 Carbon also features the S.E.R.T. system, this acts as a slip-plane system to manage the rotational forces on your head and brain. By minimising and managing the transmission of impact forces to your brain, some 20% greater absorption than standard systems, you're less likely to suffer chronic brain injuries. The 23 vents make this the most ventilated hard-shell full-face helmet currently available. The TF (Through Flow) Goggle ventilation ensures you always have a clear view too, keeping fogging at bay. Size guide: X-Small: 20.75" - 21.25" (53 - 54cm) Small: 21.5" - 22" (55 - 56cm) Medium: 22.5" - 22.75" (57 - 58cm) Large: 23.5" - 23.75" (59 - 60cm) X-Large: 24" - 24.25" (61 - 62cm) XX-Large: 24.8" - 25.1" (63 - 64cm)
Prime BlackEdition 85 Carbon Front Disc Wheel Every second counts on your quest to glory and with the BlackEdition 85 Carbon Disc Front Wheel and its aerodynamic profile, your PB won't be far away. With a stiff build and streamlined rim dimensions, this is a wheel that will keep you out in front. Hand Built, Aerodynamic, Stable and Flex-Free Built from a RD010, CNC machined 6061 alloy hub body and DT Swiss straight pull spokes, the wheel itself is more rigid and more reactive, with a greater strength to weight ratio for top weight-distribution. The 85mm rim depth and 27.5mm width also assist in keeping the wheel as stable and streamlined as possible, contouring to the tyre perfectly for the best aerodynamic performance. Comes Supplied with Wheel Accessories & SparesIf you're looking for that extra something to push you ahead in your next TT or Triathlon event, the Prime BlackEdition 85 Carbon Disc Front Wheel is an essential choice and includes a Prime QR skewer, adaptor kits for QR/12mm/15mm, a tubeless valve and tape, 2 spare spokes and nipples and a 10-speed adapter. Lightweight OptionSince the release of the original BlackEdition range in 2018, Prime have been working hard behind the scenes with Vitus Pro Cycling in search of the marginal gains that could help them in some of the UK's biggest races. After experimenting with numerous types of resin and testing countless new lay ups, they finally settled on their new and improved BlackEdition rim. Prime has also upgraded the BlackEdition to a higher grade of carbon, saving weight, and improving on the impact strength/weight ratio making the new BlackEdition their best rim yet.Features: Rim Material: T700 UD carbon fibre Rim Width: 1 9mm (internal) 27.5mm (external) Rim Depth: 85mm Disc Mount: Centre Lock Hubs: RD010, CNC machined 6061 alloy hub body Spokes: DT Aerolite (non-drive), DT Aero Comp (drive side) Hub Bearings: 6803 Weight: 868gIn The Box: Adaptor kits for QR/12mm/15mm Prime QR skewer Tubeless valve and tape 2 spare spokes and nipples UCI approved Backed by Prime Crash Replacement ProgrammeSpares (available separately):Prime Disc Brake Conversion Kits (Front) Prime RD010 QR Front Conversion Kit Prime RD010 12mm Front Conversion Kit Prime RD010 15mm Front Conversion Kit Prime Bearing Kits Prime BlackEdition CeramicSpeed Bearing Kit Prime RD010 Front Hub Bearing Kit Spoke Length:Front Disc Side: 236mmFront Non-Disc Side: 238mmERD:469mmPrime Crash Replacement ProgrammeAt Prime we understand that a crash or unexpected accident may occur under normal riding conditions. If in the event of a fall or accident where your Prime product sustains damage beyond repair, you can return the damaged component in exchange for a new product at 40% off the RRP. Please note that the Prime Crash Replacement Programme is only valid for the original purchaser within 2 years of purchase.Buy Prime Wheels from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mavic XA Elite Carbon MTB Rear WheelReady for long days on your favourite local trails as well as intense cross country racing events, this rear wheel is well-equipped for the demands of modern mountain bike (MTB) riding. It features a high-quality 100% unidirectional carbon fibre rim construction, which gives you an excellent balance of stiffness and strength as well as an overall low weight on your ride. Thanks to its hookless, tubeless-ready rim profile, you'll also enjoy tubeless advantages such as superior traction, smoother rolling performance and less chances of flats or punctures. Coming complete with 6-bolt disc brake compatibility, this model ensures powerful and consistent braking as you dominate your way from trail to trail.Features: Rim Material: 100% Unidirectional Carbon Fibre with hookless profile Use: Mountain Bike (MTB), Cross Country (XC) Axle Size: 12x142mm Internal Rim Width: 30mm ETRTO: 27.5" Option: 584x30TSS; 29": 622x30TSS Rim Profile: Hookless profile Drilling: Traditional Tubeless Ready: Yes Tyre Compatibility: Hookless compatible UST tubeless and tubetype Recommended Tyre Sizes: 60mm to 76mm (2.35" to 3.0") Valve Hole Diameter: 6.5mm Spoke Material: Steel Spoke Count: 24 Spoke Shape: Straight pull, round Spoke Lacing: 2 cross Wheel Hub Body: Aluminium Axle Material: Aluminium Freewheel: Instant Drive 360 Freehub Compatibility: Multiple options available to select Brake Compatibility: 6-bolt disc brake Bearings: Auto adjust sealed cartridge bearings (QRM Auto) Max Rider Weight: For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg, bike included ASTM Category 3: Cross country and trail riding Single or Pair: Single rear wheelManufacturer's Part Number: LR2419100 Black 29" Shimano LR2431100 Black 27.5" Shimano LR2433100 Black 27.5" SRAM XDBuy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Selle Italia Flite Boost Kit Carbon Superflow SaddleWith Superflow technology, carbon rails and a flat boost shape, this saddle celebrates 30 years of history by continuing its tradition of greatness. It features a Fibra-Tek cover construction for exceptional strength, durability and comfort on every ride. Selle Italia has also equipped it with CarboKeramic (carbon) rails, so you can benefit from their superior strength to weight ratio, whatever your discipline. Finally, its Superflow technology uses its large central cut-out area to relieve pressure around your sit bones. As a result, you'll enjoy going the extra distance with reduced fatigue and increased comfort.Updated Flite LogoA revised logo, to relive the history and victories of a legendary product. A saddle that has supported and still supports champions such as Mathieu Van Der Poel, Caleb Ewan, Philippe Gilbert and many others.Flat and Boost ShapeThe Flite Boost resumes the classic “Flat” shape that has always distinguished the Flite family to guarantee, together with a more compact shape (250mm of length), the usual performance and maximum stability while pedalling.SuperflowThe “Superflow” central cut-out allows you to release the pressure from the central area and benefit from greater comfort when pedalling.Features: Cover Material: Fibra-Tek Rail Material: Carbon/Keramic Use: Road, Racing, Endurance and MTB Dimensions:S:135x250mm; L: 145x250mm Rail Size: 7x9mm Category: Performance Weight: L: 162g (large version)Buy Selle Italia Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Stealth Superlight's state-of-the-art construction sees a one-piece design seamlessly integrating saddle and rails, resulting in a 15% weight reduction. Unique structure sheds 27g over the standard carbon version, tipping the scales at only 145gKey Features:Cutting-edge carbon weave pattern and precision fibre lay-up construction increases both stiffness and compliance,With increased compliance in the base, the padding and cover material have been upgraded to support sitbone comfort and alleviate pressure points in three main positions - on the hoods, drops and tops,The polyurethane cover, which sits over lightweight EVA foam, was tested with a variety of bib short materials to find the lowest friction rates between rider and saddle,The Stealth Superlight retains the original shape, a wide cut-out channel in the middle, offering extra comfort for riders on the edge,To retain saddle stiffness and power transfer the base includes horizontal reinforcement bridges, all part of the unique one-piece carbon reinforced base,Weight - 145g.
For all-terrain adventurers who are looking to travel light without compromising performance, control or comfort. Lightweight and robust carbon fibre layup for stiffness and compliance in all the right areasKey Features:Ergonomically designed top-section, 20° flare and 5° backsweep for comfortable all-day cruising,Engineered to fully integrate either mechanical or Di2 groupsets,Optimised mid-section for lights, GPS mounts or GRX Sub-Brake Levers,Weight from 195g,Drop 110mm,Reach 75mm,Available in 40, 42 and 44cm widths.