High quality, long lasting rear rack mounted lithium-ion battery pack for Shimano STEPS systems1000 charge cycles without significant power loss,Approximately four hours charge time,High 418Wh capacity (36V, 11.6Ah),Average weight 2600g.
WH-R8170 TL carbon clincher disc brake designed to meet pro road race criteriaLightweight clincher full carbon 50 mm deep rim for improved aerodynamics, increased rigidity and excellent inertia for sprinters and TT specialistsEasy to use Center Lock rotor mount for use with disc brakesStainless steel butted (2.0-1.8-2.0) and bladed straight pull spokes for optimal balance and rigidityElbow-less spokes make for a strong yet compliant wheelHigh lateral rigidity is produced with a wide flange spacingLabyrinth double-contact sealing effectively shuts out water and dirtAlloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces frictionCold forged, machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimumFor 100 x 12 mm axle700C clincher compatible.
WH-R8170 TL carbon clincher disc brake designed to meet pro road race criteriaLightweight clincher full carbon 60 mm deep rim for improved aerodynamics, increased rigidity and excellent inertia for sprinters and TT specialistsEasy to use Center Lock rotor mount for use with disc brakesStainless steel butted (2.0-1.8-2.0) and bladed straight pull spokes for optimal balance and rigidityElbow-less spokes make for a strong yet compliant wheelHigh lateral rigidity is produced with a wide flange spacingLabyrinth double-contact sealing effectively shuts out water and dirtAlloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces frictionCold forged, machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimumFor 100 x 12 mm axle700C tubless clincher compatible.
WH-R8170 TL carbon clincher disc brake designed to meet pro road race criteriaLightweight clincher full carbon 60 mm deep rim for improved aerodynamics, increased rigidity and excellent inertia for sprinters and TT specialists,Easy to use Center Lock rotor mount for use with disc brakes,Stainless steel butted (2.0-1.8-2.0) and bladed straight pull spokes for optimal balance and rigidity (OPTBAL),Elbow-less spokes make for a strong yet compliant wheel,High lateral rigidity is produced with a wide flange spacing,Labyrinth double-contact sealing effectively shuts out water and dirt,Alloy cone with integrated steel Borozon treated bearing races - super mirror finish reduces friction,Freehub uses direct engagement interlocking faces for quick power transfer,Cold forged, machined aluminium hub shell and oversized 7075 alloy axle keep the wheel weight to a minimum,700C clincher compatible,For 142 x 12 mm axle,11-12-speed compatible rear wheel.
Super lightweight carbon SPD-SL road pedal for high performance road racing. Lightweight carbon body provides large shoe contact area to maximise power transfer and support whilst reducing weight The wide flat profile gives better road clearance and cornering also allowing wider bearing placement for increased rigidity and uniform load distribution Low profile 8.8 mm body height from axle centre to cleat contact surface Silky smooth 3-bearing axle system two ball- and one wide roller-bearing Stainless steel pedal body plate for increased durability Open design allows for easy access and cleat adjustments Wider shoe cleat has a long life and is easier for walking than other cleats Large binding target allows quick engagement while wide cleats provides more efficient pedalling Three types of shoe cleats available: fixed 3 degrees of float in each direction or 3 degrees of float from a font-centre pivot Weight: 228 grams
Super lightweight carbon SPD-SL road pedal for high performance road racing. Wide lightweight carbon body provides large shoe contact area to maximise power transfer and support whilst reducing weight Low profile design increases road clearance for increased confidence when slicing through corners 10 mm body height from axle centre to cleat contact surface Large binding target allows quick engagement while wide cleats provides more efficient pedalling Stainless steel pedal body plates for increased durability Open design allows for easy access and cleat adjustment Low maintenance sealed cartridge axle unit Three types of shoe cleats available: fixed 3 degrees of float in each direction or 3 degrees of float from a front-centre pivot Weight: 248 grams per pair
SPD-SL road pedal for high performance road racing. Designed to match the 105 11-speed group. Wide lightweight carbon body provides large shoe contact area to maximise power transfer and support whilst reducing weight Low profile design increases road clearance for increased confidence when slicing through corners Large binding target allows quick engagement while wide cleats provides more efficient pedalling Stainless steel pedal body plate for increased durability Open design allows for easy access and cleat adjustment Low maintenance sealed cartridge axle unit Comes with SH-SH11 shoe cleat yellow which provides 6 degree of sideways float Weight: 285 grams per pair
Super lightweight carbon SPD-SL road pedal for high performance road racing. Wide lightweight carbon body provides large shoe contact area to maximise power transfer and support whilst reducing weight Low profile design increases road clearance for increased confidence when slicing through corners 10 mm body height from axle centre to cleat contact surface Large binding target allows quick engagement while wide cleats provides more efficient pedalling Stainless steel pedal body plates for increased durability Open design allows for easy access and cleat adjustment Low maintenance sealed cartridge axle unit Three types of shoe cleats available: fixed 3 degrees of float in each direction or 3 degrees of float from a front-centre pivot Weight: 248 grams per pair
The Sidi Wire 2 Carbon Air is an all-new summer cycling road shoe from Sidi Sport. Featuring top of the line Carbon Vent sole, with a vented Microfibre Tech-Pro upper fabric its perfect for warm sunny rides offering maximum airflow and breathability. The Techno 3 closure system one on the side of the shoe and one atop the tongue ensure a secure fit with no hot spots, while the adjustable heel eliminates heel lift. The full carbon Vent sole features an adjustable and replaceable front vent and a replaceable soft heel pad. The sole is 3 bolt fitting only. TECNO-3 PUSH SYSTEM The Single TECNO 3 PUSH is inserted on a composite base, The central mechanism creates a perfect tension balance between the shoe's internal and external side. for the lower foot, The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment. The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly centre the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. SIDI’s TECHNO-3 PUSH dial in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all-new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. REFLEX ADJUSTABLE HEEL RETENTION DEVICE The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel. The heel retention device tightens the top of the heel cup so that the heel doesn't slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom, adjustment turn the screw towards the + sign to tighten the heel retention device and towards the ‚Äì sign to open it. Lightweight, easy to use, and replaceable. For additional security, while pedalling, the new adjustable heel device is provided with reflex inserts for more visibility in dark conditions. SIDI HEEL CUP The reinforced cup that stabilises and supports the heel. Anatomically shaped plastic reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. VENT CARBON SOLE The VENT CARBON Sole features a light and replaceable heel pad in polyurethane to improve walkability and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON Sole are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON Sole is handmade exclusively of carbon fibre in a weave pattern oriented at opposing angles that maximise stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition.
Suit up and be prepared for the next generation of cycling footwear. The Women's Sidi Wire 2 Carbon Road Shoes are everything you want and more, designed to be high-end performers that lavish technology and comfort on your ride. They sport a cosy microfibre tech-pro upper fabric from Italy that is eco-friendly while a resistant, stable and lightweight design is certain to impress. For those that love comfort, the Women's Wire 2 Carbon Road Shoes utilise the twin techno 3 closure system in two different locations, allowing for adjustable fittings on the side and tongue of the foot. Securing your foot firmly in position, hot spots are removed while the adjustable heel stabilises. Vent Carbon Sole A replaceable polyurethane heel pad and adjustable air intake give your shoe excellent breathability. The lightweight and stiff properties of the Vent Carbon Sole allow for high performing power transfers and it is designed with integrated vent and air channels to dissipate heat and improve air flow. If that wasn't enough, the weave pattern carbon fibre construction maximises the soles stiffness while allowing for a small degree of flex in the toes. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. To ensure you select the right option, the sole is 3 bolt fitting only. Techno-3 Push Dialling in your fit to the entire length of your shoe, Sidi’s outstanding Techno-3 push system adapts to your upper shape of the foot to provide adjustable comfort 24/7. The brand’s famously reliable and replaceable closures welcome a new proprietary wire material that eliminates binding to deliver on-the-fly adjustments, while a push buckle is both serviceable and replaceable. Offering an innovative push button, lifting your buckle and adjusting your fit quickly and efficiently will revolutionise the way you ride. Adjustable Heel Retention Device There’s nothing better than being able to adjust your retention device to suit your fitting. Sidi’s creation reinforces the top of the heel cup to improve your fit at the rear. It secures the heel with a tightened top and stability is guaranteed to keep your cadence explosive without compromising your fitting. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Lightweight, easy to use, and replaceable.
Suit up and be prepared for the next generation of cycling footwear. The Sidi Wire 2 Carbon Road Shoes are everything you want and more, designed to be high-end performers that lavish technology and comfort on your ride. They sport a cosy microfibre tech-pro upper fabric from Italy that is eco-friendly while a resistant, stable and lightweight design is certain to impress. Tired of the not standing out from the crowd? The stylish matt finish gives your shoes a fresh look. For those that love comfort, the Wire 2 Carbon Road Shoes utilise the twin techno 3 closure system in two different locations, allowing for adjustable fittings on the side and tongue of the foot. Securing your foot firmly in position, hot spots are removed while the adjustable heel stabilises. Vent Carbon Sole A replaceable polyurethane heel pad and adjustable air intake give your shoe excellent breathability. The lightweight and stiff properties of the Vent Carbon Sole allow for high performing power transfers and it is designed with integrated vent and air channels to dissipate heat and improve air flow. If that wasn't enough, the weave pattern carbon fibre construction maximises the soles stiffness while allowing for a small degree of flex in the toes. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. To ensure you select the right option, the sole is 3 bolt fitting only. Techno-3 Push Dialling in your fit to the entire length of your shoe, Sidi’s outstanding Techno-3 push system adapts to your upper shape of the foot to provide adjustable comfort 24/7. The brand’s famously reliable and replaceable closures welcome a proprietary wire material that eliminates binding to deliver on-the-fly adjustments, while a push buckle is both serviceable and replaceable. Offering an innovative push button, lifting your buckle and adjusting your fit quickly and efficiently will revolutionise the way you ride. Adjustable Heel Retention Device There’s nothing better than being able to adjust your retention device to suit your fitting. Sidi’s creation reinforces the top of the heel cup to improve your fit at the rear. It secures the heel with a tightened top and stability is guaranteed to keep your cadence explosive without compromising your fitting. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Lightweight, easy to use, and replaceable.
Light, supple, durable and incredibly efficient at transferring power to the pedals, the Tiger 2 SRS Carbon MTB Cycling Shoes cut no corners when it comes to off-road cycling performance. A microfibre TechPro upper gives you a pair of shoes that offer immediate comfort. And it's durable too, an essential for regular mountain bike training and racing. To the toe, a rubber protector fends off bumps and bruises. At the heart of any great cycling shoes is the sole, and here the MTB SRS Carbon sole unit gets optimal power to your pedals with little wasted effort. MTB SRS Carbon-Ground Carbon Fibre Sole Designed to deliver uncompromising mountain bike performance, this MTB SRS carbon sole has a carefully engineered shape and a carbon lay-up that delivers direct power transfer but with tuned flex to soak up rougher terrain. It's also 100 grams lighter than found on the previous top-end Dragon sole unit. Fast starts and rapid progress up climbs are now all about your fitness. A replaceable cleat plate provides protection for the carbon sole. SRS (Sole Replacement System) The SRS sole features replaceable heel and toe tread blocks and replaceable cleat plates. These inserts provide protection of the carbon sole in the areas most prone to wear and damage. The tread pattern also boosts traction when you're off and running in a CX race or pushing over a steep unrideable pitch in the trail. Double-Techno-3 Push Flex System With the Double-Techno-3 Push Flex System, Sidi has created a quick and easy adjustment system that is also engineered to eliminate pressure across the instep. Being positioned centrally, you'll also benefit from more even closure pressure between inner and outer sides of the shoe, securing your foot for an incredibly stable pedal stroke. Micro-adjustment and easy release make this a system you can use easily on the go too - tighten up for the sprint - loosen up when it's hot. Reflex Adjustable Heel Retention Device Ensuring there's no heel slippage and as a result, no loss of pedalling efficiency or discomfort, the Reflex adjustable heel retention device is easily adjusted to suit your foot shape and preference. Sprinting, climbing or descending, enjoy firm foot-hold. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.